The 32D finish is a common specification in commercial and industrial door hardware, particularly in latch protectors, trim plates, and mounting brackets. Based on the available documentation, the 32D finish is associated with satin stainless steel and is used in products such as theLatch Guard 930-LG and trim plates included in kits like the TP-47-5PK. The 32D finish is typically selected for its durability, corrosion resistance, and aesthetic compatibility with modern commercial door systems.
This guide provides a detailed overview of the 32D latch protector installation process, product specifications, compatibility considerations, and relevant accessories. All information is derived exclusively from the provided source data.
Installation Overview for Latch Protectors with 32D Finish
Installation of a 32D latch protector involves careful preparation of the door and frame, selection of appropriate mounting hardware, and alignment to ensure secure and functional operation. While the source data does not provide a full step-by-step installation manual, it does include relevant mounting accessories and contextual information that can be used to infer best practices.
Mounting Accessories and Tools
The following items are commonly included in installation kits or recommended for use with 32D latch protectors:
- LMB-03 Mounting Bracket: A universal mounting bracket for use in hollow metal or aluminum doors and frames. It features different offsets at each end to allow adjustment for alignment.
- 930-LG Latch Guard: A standard profile latch guard with a 32D finish.
- Steel Pop-Rivets: Used for securing mounting brackets and other components.
- Self-Adhesive Templates: Provided to assist in laying out the mounting points on the door frame.
- Trim Plates (TP-47-5PK): A five-pack of trim plates with a black finish, used to cover screw heads and provide a finished appearance.
Installation tools typically include a rivet gun, drill, measuring tape, and a level. The use of a template is recommended to ensure accurate placement of the latch guard and mounting hardware.
Mounting Procedure
While no full step-by-step guide is included in the source data, the following general installation steps can be inferred from the available information:
- Preparation of the Door and Frame: Ensure that the door and frame are clean and free from obstructions. If the door has been damaged or weakened, consider reinforcing the latch area using a re-enforcing bracket (described in one of the source documents).
- Use of Mounting Templates: Apply the self-adhesive template to the frame to mark the position of the latch guard. Adjust the template according to the door swing and alignment requirements.
- Mounting Bracket Installation: Attach the LMB-03 universal mounting bracket using steel pop-rivets. Ensure the bracket is level and properly aligned with the latch mechanism.
- Latch Guard Installation: Secure the 930-LG latch guard onto the mounting bracket. Adjust the offset as needed to accommodate the door and frame dimensions.
- Trim Plate Installation: Attach the trim plates to cover any exposed fasteners and provide a finished appearance. The TP-47-5PK trim plates are designed to match the 32D finish for aesthetic consistency.
- Testing and Adjustment: Operate the door to verify that the latch guard functions correctly. Adjust the position or alignment if necessary.
Specifications and Compatibility
The 32D latch protectors and related components are designed for use in commercial and industrial settings. The following specifications are relevant:
- Finish: Satin stainless steel (32D), which provides corrosion resistance and durability.
- Dimensions: Vary by model. For example, the 3" x 11" latch guard is specifically noted in the source data.
- Mounting Options: Universal mounting brackets are available for hollow metal or aluminum doors. These brackets are adjustable to accommodate different door thicknesses and frame configurations.
- Compatibility: The 32D latch protectors are compatible with a range of door hardware, including electric strikes (e.g., the RCI-4 series from Dorma Kaba) and standard deadbolts. Accessories such as the SMT-01 strike marketing template and LEK01–LEK03 lip extension kits are available for retrofit applications.
Applications and Use Cases
The 32D latch protectors are commonly used in the following types of facilities:
- Commercial Centers
- Industrial Buildings
- Educational Facilities
- Retail Outlets
- Health Care Facilities
- Office Complexes
These products are particularly well-suited for high-traffic areas where durability and security are critical. The 32D finish is often chosen for its professional appearance and resistance to wear and tear.
Accessories and Extended Kits
To support installation and extended use, several accessories are available:
- Lip Extension Kits (LEK01–LEK03): Provide additional coverage for retrofit applications. These are not available for fire-rated models (e.g., the F4 series).
- Strike Marketing Template (SMT-01): An aluminum template used to mark the position of electric strikes during installation.
- Trim Plates (TP-47-5PK): A five-pack of trim plates with a black finish, used to conceal fasteners and enhance the appearance of the installed hardware.
- Mounting Jigs (4/7JIG): A frame prep jig made of aluminum, used to assist in the alignment and installation of strike components.
These accessories are designed to improve the efficiency and accuracy of installation, particularly in large-scale or commercial settings.
Product Variants and Customization
The source data references several product variants and customization options for the 32D latch protectors and related components. These include:
- Finish Options: Satin stainless steel (32D), bronze, dark bronze, cream, and aluminum.
- Dimensions: Varying sizes to accommodate different door and frame configurations, including 3" x 11" and 7" center rose latch protectors.
- Mounting Configurations: Adjustable mounting brackets and universal compatibility with hollow metal and aluminum doors.
- Retrofit Applications: Kits designed for retrofitting existing doors with new latch protectors and hardware.
These options allow for flexibility in installation and design, enabling users to select the most appropriate components for their specific application.
Certifications and Standards
The components included in the source data are certified to meet industry standards for commercial door hardware. Specifically:
- ANSI/BHMA A156.31, Grade 1: Applies to fire-rated models (designated with an "F" suffix), which are tested for endurance of 500,000 cycles. Non-fire-rated models are certified for 250,000 cycles.
- Corrosion Resistance: The 32D finish is baked galvanized and silver glazed, providing protection against corrosion.
- Material Quality: Hardened steel is used in several components to ensure strength and longevity.
These certifications and material specifications are important for ensuring compliance with building codes and safety regulations in commercial and industrial environments.
Conclusion
The 32D latch protector and related components are essential tools for securing and reinforcing commercial and industrial doors. With a range of mounting options, finish choices, and accessory kits, these products offer flexibility and durability for a wide range of applications. The installation process, while not fully detailed in the source data, can be inferred from the available mounting accessories and contextual information. Users should carefully select the appropriate components based on their specific door and frame configurations, and follow best practices for alignment and adjustment.
For professionals involved in commercial door installation and maintenance, the 32D latch protectors represent a reliable and aesthetically pleasing solution that meets industry standards and provides long-term performance.