The NuTone 695 and 696N bathroom exhaust fans are designed for general ventilation and are suitable for installation over tubs or shower enclosures when connected to a Ground Fault Circuit Interrupter (GFCI) protected branch circuit. Installation requires adherence to all applicable codes and standards, including fire-rated construction guidelines. This article details installation instructions, safety precautions, and available model information based on provided documentation.
Safety Precautions
Prior to any installation, servicing, or cleaning, power must be switched off at the service panel and locked to prevent accidental reactivation. If a locking mechanism is unavailable, a prominent warning device, such as a tag, should be securely fastened to the service panel. These units are intended for general ventilating use only and should not be used to exhaust hazardous or explosive materials and vapors. The documentation explicitly states that these fans are not for use in kitchens.
To reduce the risk of fire or electric shock, the NuTone 695 and 696N should not be used with any solid-state speed control device. When cutting or drilling into walls or ceilings during installation, care must be taken to avoid damaging electrical wiring or other hidden utilities. If installing over a tub or shower, the unit must be appropriately marked for such applications, and switches should never be placed within reach of a tub or shower.
Installation Instructions
The NuTone 695 and 696N are designed for mounting in either a ceiling or a standard 2" x 4" wall. The rough opening required for installation is 8 1/4" long by 7 1/4" wide. The housing itself measures 7 3/16" x 8 1/16" x 3 7/8".
The installation process begins with removing the motor plate from the housing. This is achieved by inserting a screwdriver between the motor plate and the side of the housing with the duct collar, then gently prying the housing away while simultaneously pulling up on the motor plate to disengage it. The housing should then be secured to the ceiling or wall using nails or screws through the keyhole slots in the mounting tabs, but these should not be fully tightened initially.
Ducted fans must always be vented to the outdoors.
Model Information and Availability
ManualsLib lists over 2217 NuTone manuals, covering a wide range of products including indoor furnishings, storage solutions, switches, vacuum cleaners, and more. Specific models referenced in the documentation include:
- 695, 696N - Bathroom Exhaust Blower Fan
- Broan- ROOMSIDE Series, AER110LTK, AER110LTKC, AERN110LTK
- Broan- Roomside / Flex Series
- AR1 Series
- AVSF1 / AVDF1 / AVSF1-2 Series
- PM400SSV, PM600SSV
- 43000 Series
- ALLURE QS230WW
- ROOMSIDE Series (multiple listings)
- BERD
- 2071
- NPS15Z
- 704301
- BK125LWH
- 695 (also listed under Accessories)
- 101T
- 365148
- 515T
- ABWPD36SB
- ABWPD48SB
- BK142LWH
- BK240LWH
- C905
- C907
The documentation also provides a listing of various accessories, including adapters, air cleaners, and replacement parts. Specific accessory model numbers include IA-55, BNAP-100, GSEH3K, GSFH1K, GSHH3K, and GSVH1K.
Additional Product Categories
Beyond bathroom fans, NuTone manufactures products in several other categories, as indicated by the ManualsLib catalog:
- Fire and Smoke Dampers: Models include BERD, RDFUWT, and RDM2.
- Garage Door Openers: Models include 590, 595, C77, CB75, G577, G577S, GB575, GB575S, and GB575XK.
- Handsets: Models include VSA4S.
- Heaters: Numerous models are listed, including 112, 120, 124, 128, 154, and 157.
- Heating Systems: Models include 9412D, 9417DN, and 9422P.
- Enclosures: Models include FG110HBS and FG80HBS.
- Fans: A wide range of fan models are documented, including 026715230112, 026715234813, 026715261529, 110RDB, 161, 162, 163, and 164.
- Swimming Pool Heaters
- Switches: Models include 59V, 59W, 69W, LP510R, LP510RF, LP510RS, LP510RSL, and NWT00Z.
- Thermostats: Model NTBZ48 is listed.
- Timers: Models include CD60W, DT100W, ENERLITES HET06A-R, VS-62WH, VS-63WH, VS-66WH, and VS-67WH.
- Transmitters: Models include 300 Series and NWT00Z.
- Trash Compactors: Models include 1050, 1050-J, 1050L, 1051, 1051-J, 1051L, 1052, 1052-B, 1055, and 1059.
- TV Mounts: Model 360 Series is listed.
- Dust Collectors: Model VAC PAN CI-365 is listed.
- Ventilation Hoods: Models 153001, 153002, 153004, 153023, and 1536 are listed.
Conclusion
The NuTone 695 and 696N bathroom exhaust fans offer a ventilation solution suitable for installation over tubs and showers when properly grounded via a GFCI circuit. Safe installation requires strict adherence to electrical codes, careful avoidance of existing utilities during installation, and proper venting to the outdoors. The provided documentation highlights the importance of safety precautions and provides basic installation guidance. A comprehensive range of other NuTone products are available, spanning categories from heating and cooling to garage door openers and kitchen appliances.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.