The provided documentation details procedures for re-keying Kwikset locks featuring SmartKey Security, as well as preparation steps for the door on which the lock is installed. The information focuses on the physical manipulation of the lock cylinder to accept a new key, and ensuring proper door positioning during the process. The documentation references specific Kwikset products, including the mobile home knob keyed with a pin tumbler and the Phoenix knob keyed featuring SmartKey.
Door Preparation
Prior to re-keying a Kwikset lock, proper door preparation is required. The documentation emphasizes ensuring the door is fully open and cannot close independently during the re-keying process. Users are advised to have an alternate means of entry to the home available should the re-keying process be interrupted or unsuccessful. If the lock includes a deadbolt, it must be in the locked position. Similarly, if the lock is a knob or lever style, it must also be in the locked position.
Re-Keying Procedure: Initial Steps
The re-keying process begins with the insertion of the current key into the lock cylinder. This key, which currently operates the lock, must be rotated 90 degrees clockwise. Following this rotation, the SmartKey tool is to be fully and firmly inserted into the designated SmartKey hole. Users may perceive a clicking sensation as the tool engages within the lock mechanism. Once the tool is properly seated, it is removed. The current key is then removed from the lock cylinder.
Inserting the New Key
After removing the current key, the new key intended for use with the lock is inserted. It is crucial that the new key is fully inserted, with the edge of the key making contact with the indent located on the cylinder face. Without applying any pushing or pulling force to the key, it must be rotated 180 degrees counter-clockwise. Following this counter-clockwise rotation, the key is then rotated 180 degrees clockwise.
Key Verification and Completion
To verify successful re-keying, the new key should be gently pulled to ensure it will not come out of the cylinder in its current position. Subsequently, the key is rotated 90 degrees counter-clockwise, returning it to the starting position. Finally, the new key is removed, signifying the completion of the re-keying process. The documentation indicates that a full re-keying manual and a video demonstration are available for further guidance.
SmartKey Security Features
The documentation highlights Kwikset SmartKey Security as a feature allowing users to rekey locks themselves in seconds. This functionality replaces the traditional thumbpiece with a sleek, sliding handle, designed for easy front door entry. The SmartKey system is presented as a method for homeowners to maintain control over their home security.
Additional Kwikset Products and Features
The documentation briefly mentions other Kwikset products and features, including smart locks designed to provide security and peace of mind even when away from home. It also references sophisticated and classic hardware styles with unique details, as well as light-up, motion-activated door handles. These features, however, are not detailed beyond their mention as available options.
Conclusion
The provided documentation focuses specifically on the re-keying process for Kwikset locks utilizing the SmartKey system. The process involves a series of precise rotations of both the current and new keys, along with the use of the SmartKey tool. Proper door preparation, including ensuring the door remains open and a secondary entry method is available, is also emphasized. The SmartKey feature is presented as a convenient method for homeowners to re-key their locks independently.