The documentation provided details installation procedures and component information for a range of NewAge Products, including cabinets, grills, marine equipment, and other furnishing items. The materials primarily consist of installation manuals and parts lists, focusing on assembly, mounting, and component identification. NewAge Products Inc. offers a lifetime warranty on products installed and maintained according to provided instructions. Customer support is available via phone and email, with specific contact information provided for both the U.S. and the U.K.
Cabinet Installation Procedures
NewAge offers various cabinet types, and installation procedures differ based on the specific model and desired mounting method. Initial steps for most cabinet installations involve removing shelves and loose items from the open cabinet.
Installing Feet
The installation of height-adjustable steel leveling legs requires sixteen #3 foot attachment screws. The cabinet is flipped upside down, and the feet are aligned with the corners. Four screws are used to secure each foot.
Installing Casters
Caster kits are sold separately and require sixteen 1/4” x 5/8” hex bolts, sixteen washers, and sixteen 1/4” lock nuts for installation. The cabinet is flipped upside down, and each caster is attached using four of each component – bolt, washer, and nut.
Fastening Cabinets Together
When installing multiple cabinets, they should be fastened to a securely mounted initial cabinet. Hex bolts (1/4” x 5/8”), washers, and 1/4” lock nuts are used to align and lightly tighten the cabinets together. It is recommended to remove all drawers before fastening cabinets to ensure proper leveling and tightening of all bolts.
Hanging Cabinets
Cabinets can be hung on stud walls. Specific bracket types, such as slatwall brackets, are available for use with standard 3” slatwall. Users should verify the rated capacity of their slatwall and avoid overloading the brackets. NewAge Slatwall Brackets are designed for compatibility with standard 3” on center Slatwall. Installation involves inserting bolts through the bracket, aligning with slots on the cabinet back, and securely tightening lock nuts from inside the cabinet. For locker cabinets, a second bracket should be attached 66” below the first, while for base cabinets, the second bracket should be 18” below the first.
Installing Drawers and Shelves
Drawers are installed by aligning the rails and sliding them in. Removing drawers completely involves sliding them out. Installing shelves is mentioned as a procedure, but specific details are not provided in the documentation.
Installing Light Valances
Light valances are attached to wall cabinets by aligning the holes of the valance with the cabinet and inserting and tightening bolts and nuts. A cross-section view illustrates this process.
Component Identification
The documentation lists several components used in NewAge products. These include:
- Closet Rod Brackets with Rubber Coated Hooks
- EVA Foam Drawer Liners
- Garbage Bin Parts
- Bins
- Light Valence
- Long Drawer Dividers
- Short Drawer Dividers
- Side Support Brackets
- Easy Wall Hanging Brackets
- NewAge Logo
- Full Width Clothes Light Valance Support Bracket
- Height-Adjustable Adjustable Rod and Steel Leveling Legs
- Hex Bolt (1/4 x 5/8”)
- Washer
- Lock Nut (1/4”)
- Bolt (M5 x 12mm) (M5)
Product Categories and Models
NewAge Products manufactures items across several categories, including:
Grills
The documentation lists several grill models, including:
- 65009
- 65900
- 65901
- 65996
- 65997
- 65998
- 66278
- 66913
Installation and operation manuals are available for these models.
Indoor Furnishing
NewAge offers a range of indoor furnishing products, including:
- 2 Door Cabinet
- 24 Gage Steel RTA Base Cabinet
- 3 Drawer Cabinet
- 40sqft PVC slatwall - Silver
- 60000
- 60002
- 60006
- 60203
- 60204
- 60401
Manuals and installation instructions are available for these products.
Kitchen Appliances
The following kitchen appliance models are listed:
- 67120
- 67121
- 67980
- 67981
- 67985
Installation and operation manuals are provided for these models.
Marine Equipment
NewAge manufactures marine equipment, including models:
- PRM 100
- PRM 101
- PRM 140
- PRM 160
- PRM 175
- PRM 250
- PRM 265
- PRM 301
- PRM 302A
- PRM 302C
Workshop manuals are available for these models.
Microphone Systems
- PRM 260 (Workshop Manual)
Motorized Toy Cars
- CRL-101 (Manual)
Outdoor Carts
- 66961 (Installation and Operation Manual)
Outdoor Furnishing
- 91116 (Installation Manual)
- CLASSIC OUTDOOR KITCHEN Series (Manual)
- Monterey (Installation Manual)
- OUTDOOR KITCHEN 33" BBQ Cabinet (Assembly Instructions Manual)
- Outdoor Kitchen Alum Grey Glass 33" Insert Grill Cabinet (Assembly Instructions Manual)
- Rhodes (Installation Manual)
Plumbing Products
- HOME BAR Series (Manual)
Warranty Information
NewAge Products Inc. provides a lifetime warranty on products installed, operated, and maintained according to the instructions provided with the product. Defective products or parts will be replaced if the failure results from defective materials or workmanship.
Customer Support
For assistance, customers can contact NewAge Products at:
- Phone: 1.877.306.8930 (U.S.) or 0800.031.4069 (U.K.)
- Email: [email protected] or [email protected]
Conclusion
The provided documentation outlines installation procedures for various NewAge Products, emphasizing the importance of following instructions for warranty validity. The documentation details component identification, lists available product models across multiple categories, and provides contact information for customer support. The range of products includes cabinets, grills, marine equipment, and outdoor furnishings, each with specific installation requirements.