The installation of a remote start system is a complex process that varies significantly depending on the vehicle’s make, model, and year. MyPushcart offers resources to aid in this process, including professional installation services, instructional videos, and detailed installation guides. Successful installation requires careful attention to wiring diagrams, proper connection techniques, and thorough programming procedures. This article details the steps involved in installing a remote start system, based on information provided by MyPushcart, and outlines troubleshooting steps for common issues.
Understanding the Installation Process
Installing a remote start system is not a universally standardized procedure. Each vehicle presents unique challenges and requires a tailored approach. MyPushcart emphasizes the importance of consulting the specific installation manual and wiring diagram included with each remote start kit. The process generally involves accessing and connecting to various vehicle systems, including the steering column and passenger side components. Preparation is key, and may involve removing steering wheel covers, knee bolster covers, kick panel covers, and even the glove box to gain access to the necessary wiring.
Steering Side Connections
The initial phase of installation focuses on connections made on the steering side of the vehicle. This typically involves the following steps:
- Review Installation Instructions: Before commencing any work, thoroughly review the installation instructions to understand the specific requirements for the vehicle.
- Remove Covering: Remove the necessary coverings, as outlined in the installation instructions, to expose the wiring harness.
- Accessing Wires: Locate the specific wires required for the remote start kit, referencing the wiring diagram provided.
- Wire Connections: Utilize appropriate connectors to splice the wires together, employing methods such as the “wrap, poke, tape” technique. Alternatively, a T-harness connection can be used, carefully disconnecting the vehicle’s original connector and interfacing it with the T-harness before plugging the male end back into the vehicle. Care must be taken to avoid bending pins or pulling wires tight during this process.
- Cutting Unused Wires: Any wires included in the kit that are not required for the specific vehicle should be carefully cut to prevent clutter and potential malfunctions.
Passenger Side Connections
Accessing the passenger side often requires removing the glove box to reach the power body module and other relevant components. The specific wiring requirements on this side will be detailed in the kit’s installation manual.
Connecting the Remote Start Brain and Bypass Module
Once the necessary wiring is prepared, the remote start brain and bypass module can be connected. This involves plugging in additional connectors, ensuring all connections are secure. The bypass module is a critical component that allows the remote start system to function correctly with the vehicle’s security systems.
Antenna Installation
If the remote start kit includes remote key fobs, an antenna must be installed. The installation procedure for the antenna will be outlined in the kit’s instructions.
Stowing the Remote Start Brain
After all connections are made, the remote start brain needs to be securely stowed in a location that protects it from damage and interference.
Computer-Based Programming
Many remote start systems require computer-based programming to properly integrate with the vehicle’s systems. This process involves:
- Accessing the Remote Start Tab: Opening the appropriate tab within the programming software (e.g., the decryptor tab).
- Sending Key Data: Clicking the “send key data” button and waiting for the program to finalize.
- Finalizing Programming: Unplugging the EVO (programming device) from the computer and reconnecting it to the vehicle. It is crucial to connect the power connectors first without pressing any buttons on the module.
- Module Reconnection: After computer programming is completed, reconnect the module, ensuring power is connected first before activating any buttons.
Key Fob Programming and Testing
Programming the key fob is essential for the remote start system to function correctly. This typically involves following specific button sequences on the key fob and observing indicator lights on the module to confirm successful programming. For OEM remote-controlled kits, a flashing blue light on the module indicates successful installation when the lock button is pressed on the OEM remote. Activation of the remote starter usually involves pressing a specific sequence of buttons on the key fob, such as lock three times, or lock/unlock/lock.
Troubleshooting Common Issues
MyPushcart provides guidance for troubleshooting common issues encountered during and after installation.
- Unresponsive Fobs: If the key fob is unresponsive, the first step is to check the battery. If the battery is functional, confirm that the fob was paired correctly during the programming process. Reprogramming the fob may be necessary.
- Persistent Problems: For persistent problems, consult the wiring diagram or recheck the programming steps.
- Technical Support: If troubleshooting does not resolve the issue, MyPushcart offers technical support. Users can access support information on their tip sheet or create a support ticket.
Additional Resources
MyPushcart provides a range of resources to support the installation process, including:
- Professional Installation Services: For those who prefer expert assistance, MyPushcart offers professional installation services.
- Instructional Videos: Comprehensive instructional videos are available for some car models, providing detailed visual guidance.
- Installation Guides: Step-by-step installation guides are available to assist DIY enthusiasts.
These resources aim to ensure a seamless and efficient installation experience.
Conclusion
Installing a remote start system requires careful planning, precise execution, and a thorough understanding of the vehicle’s specific wiring and programming requirements. MyPushcart provides a range of resources, including detailed installation guides, instructional videos, and professional installation services, to assist users throughout the process. Proper troubleshooting techniques and access to technical support are also essential for resolving any issues that may arise. By following these guidelines and utilizing the available resources, users can successfully install a remote start system and enjoy the added convenience and comfort it provides.