Monarch Hand Controls are designed to provide driving assistance for individuals with limited mobility. This guide details the installation process, operational procedures, maintenance requirements, and warranty information based on available documentation. The controls facilitate both acceleration and braking through mechanical linkage, offering a discreet and adaptable solution for vehicle operation.
Installation Procedures
Prior to installation, several preparatory steps must be taken to ensure safety and a successful outcome. The vehicle should be parked on a level surface with the engine turned off. Disconnecting the vehicle’s battery is a crucial safety precaution to prevent accidental electrical shorts. Users should wear appropriate safety gear, including gloves and safety glasses, and secure loose clothing, jewelry, and long hair to avoid entanglement.
The following tools and equipment are required for installation: a socket set, a wrench set, Phillips and flathead screwdrivers, wire cutters, electrical tape, a measuring tape, and a marker or pen. A level is also recommended.
The installation process involves several key steps. First, the driver’s seat should be positioned for a comfortable driving position, and any floor mats or obstructions that might interfere with the installation should be removed. The appropriate mounting location for the hand controls must then be identified, considering the user’s preference and comfort.
Mounting the hand controls involves positioning them at the chosen location and marking the mounting holes with a marker or pen. Pilot holes should then be drilled at the marked locations to simplify the installation process. Finally, the hand controls are securely mounted using the provided screws and hardware.
Connecting the cables is the next critical step. The cables must be connected to the vehicle’s existing accelerator, brake, and other control systems according to the provided instructions. It is essential to ensure that all connections are secure and properly insulated.
Operational Guidelines
Monarch Hand Controls provide a method for operating a vehicle with limited lower-body mobility. Acceleration is achieved by gently pushing the accelerator lever forward, increasing speed proportionally to the applied force. Releasing the lever maintains the current speed. Braking is accomplished by gently pulling the brake lever towards the user. Releasing the lever disengages the brakes.
The hand controls are equipped with integrated turning signals. Activation is achieved by pushing the turning signal lever up or down to activate the corresponding signal. It is important to ensure the turning signals are deactivated after completing a turn. The controls may also include additional functions, such as a horn, the operation of which should be familiarized through the provided instructions.
Adjustments and Customization
To optimize comfort and control, the position of the hand controls can be adjusted. This is accomplished by loosening the mounting screws, repositioning the controls to the desired angle and distance, and then tightening the screws to secure the new position.
The controls also offer the option to customize control sensitivity, allowing users to tailor the responsiveness of the controls to their preferences. Specific instructions for adjusting sensitivity are provided in the user manual.
Maintenance and Troubleshooting
Regular maintenance is essential for ensuring the optimal performance and longevity of Monarch Hand Controls. This includes inspecting the controls for any signs of wear or damage, tightening any loose screws or connections, and checking the cables for fraying or damage. The functionality of all control functions should also be tested periodically.
Keeping the hand controls clean and properly lubricated is also important. A mild cleaning solution and a soft cloth should be used for cleaning, and a suitable lubricant should be applied to any moving parts as recommended by the manufacturer.
If issues arise, the troubleshooting section of the user manual offers step-by-step instructions for diagnosing and resolving common problems. If the issue persists after consulting the troubleshooting guide, contacting Monarch Support is recommended for further assistance.
Warranty and Support
Monarch Hand Controls are covered by a limited warranty that protects against manufacturing defects. Detailed information regarding coverage and claim procedures can be found in the warranty documentation provided with the product.
For any assistance or questions regarding Monarch Hand Controls, users can contact Monarch Support. The documentation indicates a support team is available to assist with inquiries.
Right Angle Hand Control Features
The Monarch Mark 1A Right Angle Hand Control is noted for its unobtrusive design and popular method of operation. Braking and acceleration are applied through mechanical linkage. The accelerator linkage is discreetly located inside the dash. A key feature is the accelerator lock-out, which can be easily activated to prevent unintended acceleration when the vehicle is operated by other drivers. The documentation suggests that, in many cases, the control can be transferred to a new vehicle by a qualified mobility professional. All MPS products, including this hand control, are covered by a 5-year limited warranty.
Conclusion
Monarch Hand Controls provide a valuable solution for individuals seeking to maintain driving independence. Proper installation, operation, and maintenance, as outlined in the provided documentation, are crucial for ensuring safety and optimal performance. The controls offer adjustability and customization options to accommodate individual needs and preferences. The 5-year limited warranty and available support services provide additional peace of mind.