The Moen Designer Elegance Grab Bar, specifically the R8716D1G model, is a safety device designed for bathroom accessibility. It features a 1 ¼" diameter grab bar constructed from type 304 stainless steel. Installation requires secure mounting into wood studs, and the design incorporates a concealed screw mounting system with decorative covers. Several models are available in different finishes, including brushed nickel and chrome. This article details the installation process, dimensions, and available models based on provided documentation.
Product Overview and Model Numbers
Moen offers a range of grab bars under various series designations. The documentation details several series, including the Designer Elegance series (R87_, LR87), Voss Designer Grab Bar series (YG51), and Eva Designer Grab Bar series (YG28_). Specific model numbers referenced include:
- R8716D1GBN – 16" Designer Elegance Grab Bar with Grip Pads, Brushed Nickel Finish
- R8716D1GCH – 16" Designer Elegance Grab Bar with Grip Pads, Chrome Finish
- YG5412ORB, YG5412CH, YG5412BN, YG5418CH, YG5418ORB, YG5418BN, YG5424CH, YG5424ORB, YG5424BN, YG5430CH, YG5430BN, YG5436CH, YG5436BN, YG5442CH, YG5442BN
- YG5112CH, YG5112BG, YG5112ORB, YG5112NL, YG5112BN, YG5118CH, YG5118BG, YG5118ORB, YG5118NL, YG5118BN, YG5124CH, YG5124BG, YG5124ORB, YG5124NL, YG5124BN
- MY2609BN, MY2609CH, YG2609CH, YG2609BN
- MLRC2250DBN, LRC2250DBN
The documentation also lists numerous other grab bar models within the R87, R89, RA87, LRA87, MLRA87, and YG series, but provides limited detail beyond model numbers.
Dimensions and Materials
The R8716D1G grab bar is 16 inches in length. The bar itself is constructed from type 304 stainless steel tubing with a diameter of 1 ¼". The documentation provides specific dimensional values labeled A16.00, B19.15, C3.15, D2.80, and E1.50, though their precise meaning within the context of the grab bar’s overall dimensions is not fully clarified. The material selection of type 304 stainless steel suggests corrosion resistance.
Installation Procedure
Proper installation is critical for ensuring the grab bar’s safety and effectiveness. The following steps are outlined in the provided documentation:
- Stud Location: Locate wood studs behind the wall using a stud sensor or other appropriate method. Studs are typically spaced 16 inches apart. The center of each stud must be identified.
- Marking Mounting Locations: Slide the decorative cover away from the SecureMount™ mounting flange to expose the mounting area. Mark three mounting locations on each of the two grab bar flanges. Two marks should be positioned above the grab bar, and one below, as illustrated in the documentation (illustration not provided in source data).
- Drilling Pilot Holes: Moving the decorative cover as far as possible, drill pilot holes through the marked locations and the slots in the mounting flange. Angle the drill slightly to ensure penetration into the wood stud. Applying silicone caulk to the back of the decorative cover is recommended to prevent water penetration.
- Mounting the Grab Bar: Reposition the SecureMount™ mounting flange over the drilled holes.
- Securing with Screws: Thread washers onto wood screws. Using a screwdriver, secure the grab bar by screwing the wood screws with washers into the SecureMount™ mounting flange at both ends.
- Tightening Screws: Tighten the screws until the grab bar is securely mounted.
- Attaching Decorative Covers: Slide the decorative covers over the SecureMount™ mounting flanges, rotating them to align correctly before snapping them into place.
Important Note: The documentation explicitly states that screws must be mounted into wood studs for secure installation. Failure to do so could compromise the grab bar’s stability and safety.
SecureMount™ System
The grab bar utilizes a SecureMount™ mounting system. This system features a concealed screw design, enhancing the aesthetic appearance by hiding the mounting hardware. The decorative covers conceal the mounting flanges and screws, providing a clean and finished look. The installation process involves exposing the mounting flange, marking the stud locations, drilling pilot holes, and then securing the grab bar with screws and washers.
Series Overview
The documentation provides a list of Moen grab bar series, each with associated model numbers. These include:
- Voss Designer Grab Bar Series (YG51__): Includes models like YG5112CH and YG5124BN.
- Banbury Designer Hand Grip Series (YG26_, MYG26_): Includes models like MY2609BN and YG2609CH.
- Designer Curved Hand Grip Series (MLRC22_, LRC22_): Includes models like MLRC2250DBN and LRC2250DBN.
- Angled Grab Bar Series (RA87_, LRA87_, MLRA87__):
- Concealed Screws Grab Bar Series (89_, R89_, LR89_, DN89_): Includes numerous models like R8912P and R8924W.
- Concealed Screws Grab Bar Series (87_, R87_, LR87__): Includes models like R8712W and R8716.
- Designer Grab Bar: Grip Pads Series (R87_, LR87_): Includes models like R8716D1GCH and LR8716D1GBN.
- Eva Designer Grab Bar Series (YG28__): Includes models like YG2812CH and YG2818BN.
- Flara Designer Grab Bar Series (YG03__): Includes models like YG0312CH and YG0324BG.
The documentation provides installation videos and specification sheets for some series, but not all.
Warranty Information
Moen hand grips are covered by a limited lifetime warranty. The documentation does not provide details regarding the specific terms and conditions of this warranty.
Available Resources
Moen provides several resources to support installation and product information:
- Installation Videos: Available for some grab bar series.
- Installation Sheets: Available for some grab bar series.
- Specification Sheets: Available for some grab bar series.
- Customer Service: 800-882-0116 (USA)
- Website: www.moen.com
Conclusion
The Moen Designer Elegance Grab Bar (R8716D1G) offers a secure and aesthetically pleasing solution for enhancing bathroom safety. Proper installation, specifically secure mounting into wood studs, is paramount. The SecureMount™ system provides a concealed screw design for a clean appearance. A variety of models and series are available, each with specific features and finishes. Users should consult the provided documentation and available resources for detailed installation instructions and warranty information.