The Moen 82602 is a two-handle tub and shower plumbing product. Available documentation consists of an installation manual totaling 9 pages and approximately 2 MB in size. This article details the information contained within the provided documentation, covering parts identification, installation procedures, care instructions, and warranty information. Related Moen products are also listed within the documentation.
Overview of the Moen 82602
The Moen 82602 is categorized as a plumbing product specifically designed for two-handle tub and shower applications. The provided documentation focuses primarily on the installation process. The product is associated with several related Moen models, including the 82402, Muirfield 82000 series, 82009, 82402EP, 82555, 82864NLBL, 82854 Series, Lever Chrome 84781, and 8999W. The documentation also lists broader Moen categories such as Kitchen & Bath Fixtures, Bathroom Fixtures, Control Units, and Toilets.
Installation Manual Contents
The installation manual for the Moen 82602 outlines several key sections relevant to the installation process. These sections include:
- Helpful Tools: This section, appearing on page 2, likely details the tools required for a successful installation. Specific tools are not listed in the provided table of contents.
- Parts List: Also on page 2, this section provides a comprehensive list of the components included with the Moen 82602. The specific parts are not detailed in the provided documentation.
- Care Instructions: Found on page 2, this section provides guidance on maintaining the product’s finish and functionality. Specific care instructions are not detailed.
- Lista de Piezas / Liste des Pièces: These sections, also on page 2, appear to be translations of the “Parts List” into Spanish and French, respectively.
- Optional Supply Lines from above Valve: This section, on page 3, addresses the installation of optional supply lines.
- Thread Seal Tape: Page 6 details the use of thread seal tape during installation.
- Tub Spout Installation: Page 7 covers the procedure for installing the tub spout.
- Handle Alignment Correction: Also on page 7, this section details how to correct handle alignment issues.
- Handle Rotation Correction: Page 7 also provides instructions for correcting handle rotation.
- Installation Complete: Page 8 signifies the completion of the installation process.
- Moen Limited Lifetime Warranty: Page 8 contains information regarding the Moen Limited Lifetime Warranty.
Detailed Installation Steps (Based on Table of Contents)
While the provided documentation does not contain detailed step-by-step instructions, the table of contents suggests a logical progression for installation. The process appears to begin with preparation and tool gathering, followed by parts identification. Installation then proceeds with the valve and optional supply lines, ensuring proper sealing with thread seal tape. The tub spout is then installed, and any necessary adjustments to handle alignment and rotation are made. The final step involves verifying the installation and reviewing the warranty information.
Related Moen Products
The documentation lists a number of related Moen products. These include:
- Moen 82402
- Moen Muirfield 82000 series
- Moen 82009
- Moen 82402EP
- Moen 82555
- Moen 82864NLBL
- Moen 82854 Series
- Moen Lever Chrome 84781
- MOEN 87000 Series
- Moen 8999W
These products are likely related in terms of style, functionality, or target application within the bathroom. The documentation does not provide details regarding the specific features or differences between these models.
Moen Product Categories
The documentation categorizes the Moen 82602 within several broader product categories:
- Plumbing Product
- Kitchen & Bath Fixtures
- Bathroom Fixtures
- Control Unit
- Toilets
This categorization helps to position the 82602 within Moen’s overall product line and indicates its intended use within a residential or commercial setting.
Warranty Information
The Moen 82602 is covered by a Moen Limited Lifetime Warranty, as stated on page 8 of the installation manual. The specific terms and conditions of the warranty are not detailed in the provided documentation.
Manual Access and Online Resources
The documentation is available for free PDF download. The documentation source also provides options to sign in, upload manuals, and search for other Moen products. Users can sign in with Facebook or Google, or create a new account.
Limitations of the Provided Documentation
The provided documentation is limited in scope. It primarily focuses on identifying the contents of the installation manual and listing related products. Detailed installation instructions, specific parts lists, care instructions, and warranty terms are not fully elaborated upon. The documentation also lacks technical specifications such as flow rates, material composition, or dimensions.
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data. The documentation focuses on the Moen 82602 two-handle tub and shower plumbing product, outlining the contents of its installation manual. The manual covers helpful tools, parts lists, care instructions, installation procedures for supply lines and the tub spout, handle adjustments, and warranty information. A list of related Moen products and broader product categories is also included. However, the documentation lacks detailed instructions, specifications, and warranty terms.
Conclusion
The Moen 82602 is a two-handle tub and shower product supported by an installation manual outlining the installation process. The documentation provides a high-level overview of the installation steps and references related products and categories. Users should consult the full installation manual for detailed instructions and warranty information.