Meyer Products offers a range of snow plows and related components, with a history dating back to 1926. Documentation available details installation procedures, part identification, and compatibility information for various models. This article summarizes key aspects of Meyer snow plow systems based on available resources.
Historical Context and Model Evolution
Meyer Products initially revolutionized snow removal with the invention of the snow plow. Over time, the product line has evolved. The Meyer C Series, a commercial-grade plow often referred to as the “Husky” Series, was discontinued but parts will remain available for ten years. It has been replaced by the Lot Pro plow series. Similarly, the ST Series, designed for standard use, has been discontinued, with the ST-7.5 and STL-7.5 being the last models produced as of 2009, and replaced by the Drive Series.
Installation Procedures and Safety
Meyer Products documentation emphasizes the importance of following installation instructions explicitly, as warranty claims are voided for negligent or improper assembly. Several documents detail the process of attaching a plow to an EZ Build assembly. This involves attaching light brackets to the lift frame, securing pivot pins with Coolube Multi-Purpose Premium Grease, and attaching pivot bars with flatwashers and cotter pins.
Specific steps include removing the crankstand from the a-frame, attaching it to the lift frame, and connecting electrical plugs after applying dielectric grease (Meyer Part No. 15632) to ensure a good connection and prevent corrosion. It is also crucial to disconnect electrical plugs and install weather covers when not in use. The documentation stresses the need to back the vehicle away from the plow assembly after installation.
Vehicle preparation is also important. The vehicle must be equipped with a heavy-duty battery (70 Amp, Hr. Min., 550 C.C.A.) and an alternator (60 Amp. Min.) to maximize performance.
Component Identification and Part Numbers
The available documentation provides information on identifying and locating specific components. This includes details on hydraulic units, valve configurations, and wiring. For example, the “C” valve is identified as green and black with a white stripe, connected to a right-angle cylinder motor solenoid (white) and a motor solenoid (purple).
Resources are available for identifying pump units, including older models. The documentation also references Meyer Nite Saber headlight adapters and provides information on wiring configurations for these components. Specific part numbers are mentioned, such as the Coolube Multi-Purpose Premium Grease and dielectric grease (Part No. 15632).
Electrical System Considerations
Proper electrical connections are critical for the operation of Meyer snow plows. The documentation highlights the importance of checking snow plow light blinkers to ensure wires are not reversed. All electrical connections should be coated with dielectric grease to prevent corrosion. Instructions are provided for removing and installing terminals on plugs, including crimping new terminals. The documentation also references a toggle harness connector (15478SP).
Hydraulic System Information
The hydraulic system requires specific fluid for optimal performance. The documentation specifies the use of Meyer M-1 Hydraulic Fluid, and instructs users to fill the reservoir to the fill line.
Mounting Systems
Meyer offers various mounting systems, including EZ Classic, EZ Custom, EZ Plus/MDII, and Drive Pro. Installation instructions are available for each system. Links are provided to search for EZ Classic mounting cartons on eBay and access the corresponding installation instructions on the Meyer website.
Vehicle-Specific Installation Examples
Installation videos are available for specific vehicle models. Examples include a 2018 Jeep Wrangler JL with a Drive Pro 6' 8" Standard Operating System (SOS) plow, and a 2004 Jeep Wrangler with the same plow model. These videos are broken down into multiple parts, providing a detailed visual guide to the installation process.
Troubleshooting and Support
Meyer Products provides resources for troubleshooting problems with snow plows. A program is available to assist with diagnosing issues. The website also features a frequently asked questions (FAQ) section and a dealer locator.
Warranty and Compliance
To receive Meyer’s exclusive warranty protection, product registration is required. Meyer Products is in conformity with the essential requirements of the CE directives.
Discontinued Series Information
The documentation clarifies the discontinuation of the C Series (commercial) and ST Series (standard) plows. The C Series has been replaced by the Lot Pro series, while the ST Series has been replaced by the Drive Series. Parts for the discontinued series will remain available for a limited time.
Resources and Online Tools
Meyer Products offers several online tools to assist customers. These include the EZ-Match configuration tool for finding the right plow for a vehicle, and the EZ-Transfer tool for transferring a plow to a new vehicle. The website also provides access to product brochures, resource documents, and service technical documents.
Standard Operating System Upgrades
Information is available regarding upgrades to the Standard Operating System.
Conclusion
Meyer Products provides a comprehensive range of snow plows and related components, supported by detailed documentation and online resources. Proper installation, maintenance, and adherence to safety guidelines are crucial for optimal performance and warranty coverage. The evolution of Meyer’s product line, from the original snow plow to the current Lot Pro and Drive Series, reflects a commitment to innovation and meeting the changing needs of snow removal professionals and enthusiasts.