Memphis Shades manufactures motorcycle windshields and fairings constructed from Lucite® acrylic with an ABS inner structure. The company provides mounting kits and detailed instructions for proper installation, emphasizing safety and long-term care of the acrylic components. This article details installation considerations, care procedures, and safety information based on available documentation.
Installation Procedures and Considerations
The installation of Memphis Shades windshields requires careful attention to detail to avoid damage to the motorcycle and ensure rider safety. Documentation highlights the importance of verifying clearance between the windshield, hardware, and other motorcycle components throughout the entire range of fork movement. Specifically, installers must confirm that the windshield and its mounting hardware do not interfere with cables or wiring when the forks are turned fully in either direction. Additionally, it is crucial to ensure the windshield does not contact the fuel tank during full steering arc and height/angle adjustments.
Several mounting kits are available, identified by part numbers including 2320-0033 (for HD V-Rod), 2320-0016, 2320-0017, and 2320-0018. Mounting instructions are available for these kits, as well as for models MEM-9889, MEM-9903, MEM-9908, MEM-9926 FATS, and MEM-9926 SLIMS. The documentation stresses that these windshields are detachable and require the locking mechanism to be fully engaged after installation. Improper installation can lead to serious injury or death.
Fig. 2, referenced in the documentation, likely illustrates the proper engagement of the locking mechanism. The documentation directs users to tighten all bolts after adjusting the windshield’s height, angle, and alignment.
Windshield Material and Care Instructions
Memphis Shades windshields and lowers are manufactured from Lucite® acrylic, chosen for its durability and clarity. Proper care is essential to maintain the appearance and longevity of these components. The recommended cleaning procedure involves using plenty of soapy water – mild dishwashing liquid is preferred – and a soft cotton cloth. Users are advised to use their bare hands to dislodge bugs or to cover affected areas with wet, soapy towels to allow for soaking.
The documentation explicitly prohibits the use of paper towels and abrasive materials for cleaning, as these can cause scratches. Minor scratches can be buffed out using NOVUS #2. A strict list of prohibited cleaning agents is provided, including glass cleaning products, petroleum-based chemicals, and any cleaners containing ammonia, bleach, or other harsh chemicals.
Safety and Compliance Standards
Memphis Shades windshields and fairings are designed and manufactured to meet stringent safety standards. Every windshield and fairing meets Department of Transportation (DOT) standards and complies with American National Standards Institute (ANSI) Z26.1-1996 Group 6 safety regulations. The documentation confirms that the acrylic material used in construction blocks ultraviolet (UV) rays, providing additional protection for the rider.
Available Documentation and Model Information
ManualsLib hosts a comprehensive collection of Memphis Shades documentation, including mounting instructions, quick start manuals, and general manuals. The platform lists over 120 manuals from the brand. Specific document types available include:
- Mounting Instructions (various part numbers)
- Quick Start Manuals (MEM-9889, 2321-0238)
- Manuals (MEM-9903, 2320-0160, 2320-0164)
- Instructions (2320-0001)
The documentation also categorizes products into motorcycle accessories and racks & stands. Model numbers listed include MEB1705, 2321-0076, MEM8974, and various 2320-series and 2321-series numbers.
Product Composition
Memphis Shades fairings are constructed with a black Lucite® acrylic exterior and a textured ABS inner structure. This combination provides both aesthetic appeal and structural integrity, enabling the fairings to withstand the demands of road use.
Additional Considerations
The provided documentation does not detail specific torque specifications for mounting hardware. It is recommended that users consult a qualified motorcycle mechanic or refer to the motorcycle’s service manual for appropriate torque values. The documentation also does not provide information regarding compatibility with specific motorcycle models beyond the mention of HD V-Rod kits. Users should verify compatibility before purchasing and installing any Memphis Shades product.
The documentation does not include information on warranty details or return policies. This information is likely available through the Memphis Shades website or authorized dealers.
Conclusion
Memphis Shades motorcycle windshields and fairings offer riders protection and style. Proper installation, adhering to the provided instructions and safety guidelines, is paramount. Regular cleaning with appropriate materials will ensure the longevity and clarity of the Lucite® acrylic components. The company’s commitment to DOT and ANSI safety standards provides riders with confidence in the product’s performance and reliability. Users should always prioritize safety and consult additional resources, such as motorcycle service manuals and qualified mechanics, for comprehensive installation and maintenance guidance.