Megan Racing offers coilover conversion kits designed to enhance vehicle handling and appearance. These kits feature adjustable ride height and are constructed with specific materials for performance and durability. The following details installation procedures and component information based on available documentation.
Coilover System Overview
Megan Racing coilover kits are designed for both competition and street use. The kits allow for vehicle height adjustment, typically ranging from 0 to 3 inches of drop. This adjustability alters the vehicle’s center of gravity, potentially improving handling during turns and reducing wheel hop during acceleration. The kits utilize 6061 CNC-machined aluminum sleeves and SAE 9254 cold-wound steel coil springs. The documentation highlights that these kits are priced competitively compared to other manufacturers. Available merchandise also includes apparel and accessories featuring the Megan Racing logo.
Installation Procedure
The installation process requires specific tools, including wrenches (12mm, 17mm, 19mm) and sockets (12mm, 14mm, 17mm, 19mm), a small extension, a small flat-blade screwdriver, and penetrating fluid. It is strongly advised that users read the entire installation guide before beginning and refer back to it as needed. The installation should be performed at the user’s own risk, acknowledging the potential for accidents if not performed correctly. A safe lifting procedure for the vehicle is recommended, referencing a specific guide for the 86 chassis.
Disconnecting Suspension Components
The initial steps involve safely lifting the vehicle with a jack and securing it with jack stands. The documentation emphasizes that the jack should never be solely relied upon to support the vehicle. Several components must be disconnected to facilitate coilover installation. These include:
- ABS Line: The ABS line is secured with a 12mm bolt, which should be retained for re-use with the coilover.
- Brake Line: Similar to the ABS line, the brake line is also secured with a 12mm bolt.
- Sway Bar End Link: The factory sway bar end link is held in place by a 17mm nut. Corrosion on the threads may require the use of penetrating fluid.
- Strut Mounting Clips: The strut features upper and lower mounting clips that must be released. The lower clip has two prongs, while the upper clip has four, making it more difficult to remove. The technique involves depressing the prongs and gently pulling the clip. For the upper clip, releasing the cable first is recommended, followed by clip removal once the strut is off the vehicle. The documentation details a radial approach – either clockwise or anti-clockwise – to depress and pull the clips.
Component Inspection
Upon receiving the coilover kit, a thorough inspection of the parts is recommended. The kit should include two front and two rear coilovers, two front adjustable sway bar end links, locking collar wrenches of different sizes, and an Allen wrench. The documentation confirms that the components should be well-packaged and free from defects.
Kit Components
A Megan Racing coilover kit typically includes the following components:
- Front Coilovers (x2)
- Rear Coilovers (x2)
- Adjustable Sway Bar End Links (Front, x2)
- Locking Collar Wrenches (various sizes)
- Allen Wrench
Additional Products
Megan Racing also offers a range of other automotive products, including:
- Lowering Springs (for various vehicle models, including Mitsubishi Mirage and Ford Escort)
- Meter Gauges (Vacuum Gauge, Exhaust Gas Temperature Gauge)
- Accessories (License Plate Frame, Drive-On Ramps)
- Apparel (T-shirts, Sunglasses)
- Performance Parts (Toyota Sienna Front Lower Control Arms, Lug Nuts, Exhaust Hanger Bushings)
Safety Considerations
The installation guide explicitly states that the installation should be performed at the user’s own risk. Incorrect installation can compromise vehicle safety and potentially lead to accidents. It is crucial to follow the instructions carefully and ensure all components are properly secured. The documentation also stresses the importance of using jack stands to support the vehicle and never relying solely on the jack.
Conclusion
Megan Racing coilover kits provide a means to adjust vehicle ride height and improve handling characteristics. Installation requires a specific set of tools and a careful, methodical approach. The documentation emphasizes the importance of safety and proper installation techniques. Beyond coilover systems, Megan Racing offers a variety of automotive parts and accessories.