The MCombo retractable awning is designed for residential use, providing shade and protection from the sun. Installation requires basic tools and adherence to specific procedures to ensure stability and proper function. The awning is applicable to reinforced concrete, brick, and wooden walls, with a recommended installation height between 2.5 and 3.5 meters. The product is intended for use in wind conditions under level 5. Several models are available, including 6055-4040, 6055-4080, and 6055-4012, with varying bracket and bolt requirements depending on the awning’s size. Installation guides and videos are available online to assist users.
Parts List and Tools
Prior to installation, users should prepare the necessary tools, which are not included with the product. The parts list includes the awning itself, a hand crank, and wall brackets. The number of wall brackets and expansion bolts required depends on the awning’s size. For awnings less than 3 meters in length, two wall brackets are needed for each end of the torsion bars. Awnings between 3.5 and 4.5 meters require two wall brackets at each end and one middle bracket. Awnings exceeding 5 meters require two wall brackets at each end and two middle brackets, equally spaced. Specific components mentioned in exploded views include connecting bars, brackets, boards, front and back fixing bars, and plastic caps. Screw sizes referenced are M4x20mm, M4x15mm, and M8x80mm.
Installation Procedure
The installation process begins with measuring the desired location on the wall and drilling holes for the wall brackets. The diameter and depth of the holes must match the expansion bolts. It is recommended to draw lines on the wall to ensure precise positioning. Once the holes are drilled, the wall brackets are affixed to the wall. The awning’s arms are then tied tightly to the torsion bar, and the front bar wrist support is connected to the front bar. The front bar and roller are aligned, and the bolts are tightened to 95% using a ribbon tube spanner. Leveling the front side involves loosening locking nuts, adjusting the jack bolt, aligning the arm to a horizontal position, and re-tightening the locking nuts.
Awning Size and Bracket Requirements
The number of wall brackets required is directly related to the awning’s length.
- Less than 3 meters: Two wall brackets at each end of the torsion bars.
- 3.5 to 4.5 meters: Two wall brackets at each end of the torsion bar, with one middle bracket in between.
- Greater than 5 meters: Two wall brackets at each end of the torsion bar, with two middle brackets dividing the distance between the arm shoulders equally.
Specific model numbers mentioned include 6055-4040 and 6055-4080. The documentation also references the 6055-4012 model as part of a larger assembly option.
Fabric Installation
The fabric and valance are spread out, and a fabric liner is inserted. The liner consists of one thin liner (N-1) and two thick liners (N-2). The thin liner is inserted into the gauges on the roller, while the thick liners are inserted through the front bar and valance. Attention should be paid to the fabric’s orientation, as the back side has a hem facing downwards.
Troubleshooting
A common issue is uneven fabric wrapping or arms not opening simultaneously. The documentation suggests checking the stability of the arms and adjusting the front bar wrist of the faster arm outwards accordingly.
Product Specifications
The MCombo retractable awning is constructed from steel tube, aluminum alloy, plastic parts, and polyester fabric. The steel tubes undergo spray painting and oxidation treatment. The fabric surface is treated with PU, UV protection, and waterproofing. The recommended installation height is between 2.5 and 3.5 meters. The awning is designed to shield from sunshine and is suitable for use in wind conditions up to level 5. The product name is listed as “Retractable awning” with details available on the package.
Warranty Information
The product is covered by a limited warranty that protects against defects in material or workmanship under normal use. During the warranty period, MCombo will repair or replace defective products or parts at no charge. Users are expected to comply with any retrofit kits provided by MCombo to enhance product safety. Customer support is available at 1-323-597-1109.
Available Installation Resources
MCombo provides installation instructions and video tutorials for various models. These resources are accessible online through the MCombo website. Specific model numbers with available resources include:
- 6151-4260
- 6151-4339
- 6151-4071
- 6151-4748
- 6151-HQ102
- 6151-4123
- 6151-4720
- 6055-4137 4167
- 6055-4788
- 6055-4209 4254
- 6055-4104 4112
- 6055-12MT
- 6055-4040 4080 4012
- 6055-4744
- 6055-AW404 AW408
- 6055-4693
- 6055-4607 4627 4664
These resources are available for download as PDF installation instructions or as video tutorials.
Applicable Wall Types
The MCombo retractable awning is suitable for installation on reinforced concrete walls, brick walls, and wooden walls.
Conclusion
The MCombo retractable awning offers a solution for providing shade and protection from the elements. Proper installation is crucial for ensuring the awning’s stability and functionality. The number of wall brackets required depends on the awning’s length, and users should consult the provided installation guides and videos for specific instructions. The product is covered by a limited warranty, and customer support is available for assistance. The awning is designed for use on various wall types and in moderate wind conditions.