The Maytag CWG3100AAB and related 27-inch and 30-inch single and double wall oven models require specific installation considerations. Documentation details dimensions, floor support requirements, and conduit access points. These instructions are intended to avoid breakdowns, non-warranty repairs, and to extend the life of the appliance. This article details the installation requirements and dimensional specifications based on available documentation.
Installation Requirements
Prior to installation, users should read the provided installation instructions. The documentation specifies a minimum floor support requirement of 5/8-inch plywood capable of supporting the oven’s weight. Single wall ovens require support for 142 lbs, while double wall ovens necessitate support for 250 lbs. A 1 1/4-inch diameter conduit access hole is required for electrical connections. This hole should be positioned as close to the corner of the cabinet as possible.
The documentation notes that gas or electric cooktops may be installed above these ovens, but users must consult the cooktop’s installation instructions for appropriate cutout sizes. If an electric cooktop is installed, its electrical connection must be in an adjacent, accessible location. The cooktop and wall oven must be on separate 120/240 or 120/208 volt 60 Hz AC circuits.
Air intake slots along the bottom of the oven must not be blocked.
Dimensional Specifications: 27-inch Single Wall Oven
The documentation provides detailed dimensional specifications for the 27-inch single wall oven. These dimensions are provided in both inches and centimeters.
- A: Minimum 27 inches (68.58 cm)
- B: Minimum 24 inches (60.96 cm)
- C: Approximately 27 7/16 inches ± 1/16 inch (69.69 cm)
- D: Minimum 23 1/2 inches (59.69 cm)
- E: Approximately 25 1/2 inches ± 1/16 inch (64.77 cm)
- F: 27 3/4 inches (70.49 cm)
- G: 26 3/4 inches (67.95 cm)
- H: 24 7/16 inches (62.07 cm)
- I: 4 to 33 inches (10.2 to 83.8 cm)
Dimensional Specifications: 27-inch Double Wall Oven
The documentation also outlines the dimensions for the 27-inch double wall oven, again provided in both inches and centimeters.
- A: Minimum 27 inches (68.58 cm)
- B: Minimum 24 inches (60.96 cm)
- C: Approximately 49 5/8 inches ± 1/16 inch (126.05 cm)
- D: Minimum 23 1/2 inches (59.69 cm)
- E: Approximately 25 1/2 inches ± 1/16 inch (64.77 cm)
- F: 49 15/16 inches (126.84 cm)
- G: 26 3/4 inches (67.95 cm)
- H: 24 7/16 inches (62.07 cm)
- I: 4 to 12 inches (10.2 to 30.5 cm)
Dimensional Specifications: 30-inch Single Wall Oven
The documentation provides dimensional specifications for the 30-inch single wall oven.
- A: Minimum 30 inches (76.20 cm)
- B: Minimum 24 inches (60.96 cm)
- C: Approximately 27 7/16 inches ± 1/16 inch (69.69 cm)
- D: Minimum 23 1/2 inches (59.69 cm)
- E: Approximately 28 3/16 inches ± 1/16 inch (71.60 cm)
- F: 27 3/4 inches (70.49 cm)
- G: 29 3/4 inches (75.57 cm)
- H: 24 7/16 inches (62.07 cm)
- I: 4 to 33 inches (10.2 to 83.8 cm)
Dimensional Specifications: 30-inch Double Wall Oven
The documentation also outlines the dimensions for the 30-inch double wall oven.
- A: Minimum 30 inches (76.20 cm)
- B: Minimum 24 inches (60.96 cm)
- C: Approximately 49 5/8 inches ± 1/16 inch (126.05 cm)
- D: Minimum 23 1/2 inches (59.69 cm)
- E: Approximately 28 3/16 inches ± 1/16 inch (71.60 cm)
- F: 49 15/16 inches (126.84 cm)
- G: 29 3/4 inches (75.57 cm)
- H: 24 7/16 inches (62.07 cm)
- I: 4 to 12 inches (10.2 to 30.5 cm)
Cooktop Compatibility
The documentation indicates that both gas and electric cooktops can be installed over these wall ovens. However, it explicitly states that users must refer to the cooktop’s installation instructions to determine the correct cutout size. Specific minimum cutout dimensions are provided for different cooktop types:
- 4 Burner Gas: 2 1/8 inches minimum (K)
- Electric: 3 1/8 inches minimum (K)
- Induction: 3 1/8 inches minimum (K)
The documentation emphasizes that the conduit access hole should be cut as close to the corner of the cabinet as possible. Users are directed to consult their dealer for approved cooktop models.
Additional Notes
The documentation includes a note regarding air intake slots, stating that they must not be blocked. This is crucial for proper oven operation. The document is dated 04-99-01 and bears the identification number 8101P306-60. The manufacturing location is listed as Newton, IA 50208.
Conclusion
The Maytag CWG3100AAB and related wall oven models require careful attention to installation details. Proper floor support, conduit access, and adherence to dimensional specifications are critical for safe and reliable operation. Users must consult both the oven’s installation instructions and the installation instructions for any accompanying cooktop to ensure a correct and compliant installation. The provided documentation offers specific dimensions for 27-inch and 30-inch single and double oven configurations, along with guidance on cooktop compatibility.