Majic Stairs, Inc. manufactures electric attic access stairs designed to provide safe and convenient access to attic spaces in residential and commercial buildings. These lifts, known as Majic Attic Lifts, offer a motorized solution for accessing storage areas, eliminating the need for traditional ladders. The company, based in Florida, has been producing these lifts since 2015. Key features include remote operation, safety mechanisms like obstacle detection, and a weight capacity of up to 500 lbs. Installation requires attention to safety precautions, including verifying the absence of wiring or gas lines before cutting an access hole.
Company Overview and Product Line
Majic Stairs, Inc. is a Florida-based company specializing in electric attic access solutions. Established in 2015, the company focuses on manufacturing the Majic Stairs and Majic Attic Lift products. These products are designed to revolutionize attic access, offering improvements in safety, durability, and ease of use. The company’s products are utilized in a variety of settings, including homes, businesses, churches, and aircraft hangars, across the United States and Canada. Majic Stairs positions itself as a provider of smart home solutions, catering to users who prioritize efficiency and safety.
Safety Precautions
The Majic Attic Lift includes several safety features and requires adherence to specific precautions during operation and installation. The product instructions explicitly state that individuals under the age of 18 should not operate the lift, and children should be kept away from the lift during operation. When the lift is not in use, the remote control should be removed and stored out of reach of children. During installation, it is crucial to verify the absence of electrical wiring, gas lines, or other fixtures in the area where the access hole will be cut. Failure to do so could result in serious hazards.
Components and Hardware
The Majic Attic Lift consists of several key components. Attic parts include the upper workstation, upper arm (left and right), motor housing (containing the motor, roller tube, and cable), pulleys, pulley covers (left and right), a stabilizer bar, and a 12-inch stop angle. Additional hardware includes a corner guide, 17mm Nylock nuts, #12 - 3/4" Teks screws, galvanized 1 1/4" nails, and a red safety chain. The lower workstation utilizes 1/4" x 2 1/2" flat head bolts and other hardware components. A complete list of components and their quantities is provided in the installation instructions.
Installation Process
Installation of the Majic Attic Lift requires careful preparation and adherence to the provided instructions. The recommended installation location should have at least one bay of space between the lift and any existing stairs or ladders, with two bays being preferable to allow for easier movement of items. Cutting a hole in the ceiling is a necessary step, but it must be performed with extreme caution to avoid damaging hidden wiring or gas lines. The end block must be square to ensure proper lift operation. The documentation recommends that a licensed electrician be consulted for the electrical connection.
Remote Programming
The Majic Attic Lift is operated using a wireless remote control. Programming the remote involves a specific procedure to ensure the lift door closes tightly against the ceiling. This is achieved by pressing and holding the "Up" arrow on the remote until the door is fully closed. If the door does not close completely, it indicates an obstruction or uneven spacing at the corners, requiring adjustment. The remote requires batteries to function, and a blinking light indicates low battery power.
Troubleshooting
The Majic Attic Lift installation instructions include a troubleshooting section to address common issues. If the remote control does not operate, the first step is to verify that the batteries are functioning correctly. Additionally, users should check the circuit breaker to ensure that power is being supplied to the lift. The documentation provides these two initial steps for resolving operational problems.
Specifications and Features
The Majic Attic Lift boasts several key specifications and features. It has a weight capacity of up to 500 lbs. The stair dimensions are customizable to fit the specific space requirements of the installation location. The lift is designed to accommodate ceiling heights ranging from 8 to 12 feet. Construction materials include aluminum and powder-coated steel, contributing to the lift’s durability. Operation is achieved through push-button motorized control with a wireless remote. Safety features include dual handrails, non-skid treads, and automatic obstacle detection. The lift requires a standard 110V, 15-amp household circuit for power. Majic Stairs offers a 5-year "bumper-to-bumper" warranty on its products. A significant benefit is that installation does not require cutting of trusses. The product is designed for low maintenance due to its durable construction.
Product Support and Contact Information
Majic Stairs provides customer support through its website and phone. For additional information about the products, users can visit www.majicstairsinc.com. Customer service can be reached by calling (352) 446-6592 or by sending an email to [email protected]. The documentation includes a QR code that directs users to the company’s website for the latest product information. The release date of the provided documentation is November 12, 2022 (MAL-0103).
Conclusion
The Majic Attic Lift offers a motorized solution for accessing attic spaces, prioritizing safety and convenience. Installation requires careful attention to safety precautions and adherence to the provided instructions. The lift’s features, including remote operation, obstacle detection, and a 500 lb weight capacity, make it a viable option for homeowners and businesses seeking improved attic access. Proper maintenance and troubleshooting, as outlined in the product documentation, will ensure long-term reliable operation.