The Samsung MA-TK8020TS is a microwave model designed for built-in installation. Documentation details the necessary steps for installing the accompanying built-in kit, emphasizing safety precautions and adherence to electrical standards. The kit includes various metal components and requires specific tools for proper installation. This article provides a comprehensive overview of the installation process, required tools, included parts, and electrical specifications, based solely on the provided documentation.
Installation Preparation
Prior to commencing installation of the built-in kit for the Samsung MA-TK8020TS microwave, several preparatory steps must be observed. The documentation stresses the importance of thoroughly reading the complete installation instructions before beginning any work. This ensures a full understanding of the process and potential safety considerations.
A critical initial step is disconnecting the microwave from the electrical outlet. This precaution is essential to prevent electrical shock during the installation process. Simultaneously, the turntable should be removed from the oven cavity. The built-in kit contains metal parts, and caution should be exercised when handling these components to avoid potential injury.
Furthermore, the documentation explicitly warns against removing any permanently affixed labels, warnings, or plates from the product. Such removal may invalidate the product warranty. Throughout the installation process, adherence to all applicable governing codes and coordinates is required.
Electrical Requirements
The Samsung MA-TK8020TS microwave has specific electrical requirements that must be met for safe and proper operation. The documentation states the oven requires a 115-120 volt AC power supply. The electrical circuit serving the microwave must be capable of delivering a minimum of 15 amps. These specifications are crucial for ensuring the microwave functions correctly and avoids overloading the electrical system.
Parts Included in the Built-In Kit
The built-in kit for the Samsung MA-TK8020TS microwave includes the following components:
- Trim Frame (1 EA)
- Duct Base (1 EA)
- Duct Side (1 EA)
- Duct Rear (1 EA)
- Install Bracket (2 EA)
- Install hook
- Screw A (5/8" length) (12 EA)
- Screw B (15/32" length) (4 EA)
- Screw C (25/64" length) (9 EA)
- Template (1 EA)
The documentation notes that the quantities listed are for reference and may vary slightly depending on the specific kit received. All components are necessary for a complete and secure installation.
Required Tools for Installation
Successful installation of the Samsung MA-TK8020TS microwave requires the use of several tools. The documentation lists the following as essential:
- Screwdriver: A Phillips head screwdriver is necessary for tightening the screws used during the installation process.
- Level: A level tool is required to ensure the microwave is installed straight and level, preventing instability and ensuring proper operation.
- Measuring Tape: A measuring tape is needed to accurately measure the installation space and ensure correct alignment of the microwave.
- Pencil or Marker: A pencil or marker is useful for marking the positions where screws and brackets will be installed, facilitating accurate placement.
- Drill: A drill may be required to create pilot holes for the screws, particularly when installing the microwave on a hard surface.
- Stud Finder: If the microwave is being installed on a wall, a stud finder is recommended to locate wall studs for secure mounting.
Having these tools readily available will contribute to a smoother and more efficient installation process.
Installation Steps Overview
The documentation provides a general overview of the installation steps. It begins with the aforementioned preparatory steps: reading the instructions, disconnecting power, and removing the turntable. The documentation then directs users to follow the specific instructions provided within the manual for the installation of the built-in trim kit. Detailed step-by-step guidance is contained within the full installation manual, which is not fully reproduced in the provided source material.
General Product Information
The Samsung MA-TK8020TS is identified as a microwave oven manufactured by Samsung. The model number is MA-TK8020TS, and the EAN is 887276224466. The provided documentation is an installation guide in English, available in PDF format. The documentation also highlights the microwave’s advanced cooking functions and presets, designed to enable users to prepare a wide range of dishes with ease and precision. The user interface is described as user-friendly and intuitive, with easily accessible and adjustable cooking options. The documentation characterizes the MA-TK8020TS as a reliable, durable, and versatile microwave accessory.
Safety Considerations
Throughout the installation process, safety is paramount. The documentation repeatedly emphasizes the need for caution when handling the metal parts included in the kit, to prevent potential injuries. Disconnecting the microwave from the electrical outlet before beginning installation is a critical safety measure. Additionally, maintaining adherence to all governing codes and coordinates during installation is essential for ensuring a safe and compliant installation. The documentation also stresses the importance of not removing any permanently affixed labels, warnings, or plates, as these provide important safety information and contribute to warranty validity.
Usability and Functionality
The Samsung MA-TK8020TS is designed with usability in mind. The documentation notes the presence of advanced cooking functions and presets, simplifying the cooking process for users. The intuitive controls and user-friendly interface allow for easy customization of cooking settings. These features contribute to a convenient and efficient cooking experience. The documentation suggests the appliance offers precision and consistency in meal preparation.
Conclusion
The Samsung MA-TK8020TS microwave, when installed with its accompanying built-in kit, offers a versatile and reliable cooking solution. Proper installation requires careful adherence to the provided instructions, attention to electrical requirements (115-120V AC, 15 amps or greater), and the use of appropriate tools. Prioritizing safety throughout the process, including disconnecting power and handling metal components with care, is crucial. The documentation emphasizes the importance of following all governing codes and maintaining the integrity of product labels to ensure warranty validity.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.