The Schlage M490 is a single electromagnetic lock designed for door security applications. Documentation details the installation process, component identification, and related models within the Schlage M400 series. This article provides a comprehensive overview of the M490, focusing on installation procedures as outlined in the provided materials. The lock is categorized as a door lock and falls under the broader category of locks. Several related Schlage models are also listed, including the M420, M450, M400 Series, ALLEGION MT20W, MK76, MK80, M422, M452, M492, and M490DE.
Lock Features and Models
The provided documentation lists features, models, and trims associated with the Schlage M490. Specific details regarding these features are not elaborated upon in the available source material. The documentation identifies the M490 as part of the M400 series of electromagnetic locks. The documentation also references “Plus” and “Standard” models, suggesting variations within the M490 line, particularly concerning wiring connections.
Electrical Specifications
The documentation references electrical specifications for the lock, but does not provide specific values or details. Further information regarding voltage, current draw, or power requirements is not included in the provided source material.
Preparing for Installation
Installation of the Schlage M490 involves several steps, beginning with preparation. This includes determining the proper magnet orientation and reorienting the magnet if necessary. The process also requires placing a template and marking the holes for installation. The documentation does not specify the type of template or the tools required for marking.
Installation Steps
The installation process is detailed in a sequential manner within the documentation. The following steps are outlined:
- Install MBS Indicator
- Install ATS
- Remove Cover
- Drill Hole for MBS Indicator
- Attach Armature to Door
- Install Mounting Bracket into Frame
- Attach Mounting Bracket Temporarily
- Remove Wiring Cover
- Slide Magnet Onto Bracket
- Align Magnet to Armature
- Fully Attach Bracket
- Install Lock
The documentation differentiates between wiring connections for the “Standard” and “Plus” models during the installation process. The “Standard Model” requires connecting wiring to the board, while the “Plus Model” also involves this step. Both models require connecting ATS wires.
Wiring Connections
Connecting the wiring to the board is a critical step in the installation process. The documentation emphasizes reviewing the wiring connections to ensure accuracy. Specific details regarding wire colors, terminal assignments, or wiring diagrams are not provided. The documentation highlights the need to connect ATS wires, but does not elaborate on their function or connection requirements.
Related Schlage Products
The documentation lists several related Schlage products, including:
- Schlage M420
- Schlage M450
- Schlage M400 Series
- Schlage ALLEGION MT20W
- Schlage MK76
- Schlage MK80
- Schlage M422
- Schlage M452
- Schlage M492
- Schlage M490DE
These products are categorized under “Locks,” “Door locks,” “Card Reader,” “Control Unit,” and “IP Access Controllers.” The documentation does not provide any details regarding the features or specifications of these related products.
Troubleshooting and Support
The provided documentation does not contain any troubleshooting steps or support information. It focuses solely on the installation process and model identification.
Conclusion
The Schlage M490 is an electromagnetic lock intended for door security applications. Installation involves a series of steps, including preparing the door, attaching components, and connecting wiring. The documentation differentiates between “Standard” and “Plus” models regarding wiring procedures. The provided materials offer a basic overview of the installation process but lack detailed specifications, troubleshooting guidance, or comprehensive information about related products.