The provided documentation details methods for identifying Lutron dimmer and switch model numbers, specifically focusing on the Diva (DVLV-603P) and Skylark (SLV-603P) series. The information outlines where to find the model number on the device itself and on its packaging, should the original packaging be available. It also lists compatible lighting types for each series.
Identifying Model Numbers with Packaging
If the original packaging is available, locating the model number is straightforward. For products packaged in a plastic clamshell, the model number is printed on the front of the insert card, located in the lower left corner. If the product was shipped in a box, the model number can be found on the top of the box. The documentation notes that most model numbers are 12 to 16 characters in length and begin with a combination of letters followed by a dash.
Identifying Model Numbers Without Packaging
When the original packaging is unavailable, the model number can be found directly on the dimmer or switch itself. Users must first ensure the electricity to the device is turned off. The wallplate should then be removed, followed by the wallplate adapter. After unscrewing and carefully pulling the dimmer/switch out of the wall, the label containing the model number will be visible on the side of the device.
A specific exception exists for Ariadni/Toggler dimmers. For these models, the product number is not located on a label. Instead, it is printed directly on the front of the dimmer, either on the top left or directly below the on/off toggle.
Lutron Diva Series (DVLV-603P) Compatibility
The documentation indicates that the Diva series, specifically model DVLV-603P, is compatible with several lighting technologies. These include:
- 0-10V
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Fluorescent 2-Wire
- Hi-Lume LED 2-Wire
- Incandescent / Halogen
- LED / CFL
- Magnetic Low Voltage
Lutron Skylark Series (SLV-603P) Compatibility
The Skylark series, specifically model SLV-603P, also supports a range of lighting types. These include:
- Electronic Low Voltage
- Fluorescent / LED 3-Wire
- Fluorescent 2-Wire
- Incandescent / Halogen
- LED / CFL
- Magnetic Low Voltage
Support Resources
Lutron provides a variety of support resources for both the Diva and Skylark series. These resources include:
- Documents
- Frequently Asked Questions (FAQs)
- Videos
Specific documents listed include:
- #001 - 3-Way & 4-Way Switching and Dimming with Wallbox Dimmers
- #017 - Common Neutral Interaction
- #019 - Guide to Dimming Low-Voltage Lighting
These resources are available through the Lutron support website and are intended to assist users with installation, troubleshooting, and configuration of their Lutron lighting controls.
Conclusion
The provided documentation focuses on assisting users in locating the model number of their Lutron Diva and Skylark dimmers and switches. Whether the original packaging is available or not, the instructions detail how to find this crucial piece of information. Additionally, the documentation outlines the compatibility of both series with a wide range of lighting technologies, and directs users to available support resources for further assistance.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.