The Lutec 3-Head Outdoor Post Light is presented as a durable and functional lighting solution for outdoor spaces. Designed for all-weather use, this fixture utilizes cast-aluminum construction and requires three E26 bulbs (not included). Installation involves securing the fixture to a pier mount or lamp post, and specific LED bulb replacements must adhere to manufacturer guidelines. This article details installation procedures, maintenance recommendations, troubleshooting steps, and safety considerations based on available documentation.
Installation Procedures
Proper installation is crucial for the safe and effective operation of the Lutec 3-Head Outdoor Post Light. The documentation emphasizes several key steps. First, the device is classified as a Class I device and must be connected to earth for safety. Before commencing installation, users are directed to consult the safety instructions available on the Lutec website or via a QR code included with the product packaging.
The installation location should be suitable for a light fixture with an IP44 splash-proof rating. The light requires connection to a power supply operating at 220-240V~ and a frequency of 50/60Hz. Assembly involves attaching the fixture body to either a pier mount or a lamp post, secured by three preassembled screws. Following this, three solar LED bulbs (included with model 6951302012) are to be installed into the candelabra sockets suspended from the fixture roof.
A warning is provided regarding the use of specific LED bulbs. The supplied LED bulbs are specially developed for use with model 6951302012 and must be replaced with model 9700357000. Using any other bulb type will result in malfunction. The solar panel requires a minimum of eight hours of direct sunlight to charge the batteries, and charging conditions vary by time zone, affecting the total hours of light discharge. Batteries may arrive depleted and require charging.
After assembly, the switch located on the fixture roof should be turned on. The fixture roof is then attached to the fixture body by tightening thumbscrews previously removed during an earlier step.
Maintenance and Cleaning
The Lutec 3-Head Outdoor Post Light is designed to provide years of maintenance-free service. Routine care primarily involves cleaning the fixture’s surfaces. The recommended cleaning method is to wipe the surfaces with a damp, non-abrasive cloth. Avoid using harsh chemicals or abrasive cleaners, as these could damage the finish.
Troubleshooting
The documentation provides limited troubleshooting guidance. If the light does not illuminate, the first step is to ensure the switch is in the “ON” position. If the switch is on and the light still does not work, a potential cause is a completely discharged battery. In this case, the battery should be charged for 6-8 hours.
If the LED bulb stops working, it must be replaced by a professional technician or authorized service center. Users should not attempt to replace the LED bulb themselves. When contacting a technician, it is important to provide the model number of the light fixture and any other relevant details to ensure the correct replacement bulb is used.
Safety Instructions
Safety is a primary concern during both installation and operation of the Lutec 3-Head Outdoor Post Light. The documentation stresses the importance of connecting the fixture to earth due to its Class I device classification. Users are advised to consult the safety instructions available on the Lutec website or via the QR code provided with the product.
A warning is issued regarding the use of appropriate LED bulbs, emphasizing that only model 9700357000 should be used as a replacement for the supplied bulbs in model 6951302012. The documentation also highlights the importance of ensuring the solar panel receives adequate sunlight for battery charging.
Customer Support and Warranty Information
Lutec provides customer support through various channels. Questions, problems, or missing parts can be addressed by contacting the customer service hotline Monday through Friday, 9 am to 5 pm EST, at 1-(877) 714-8669. Alternatively, customers can email [email protected] or visit the Lutec website at www.lutec.com.
The manufacturer specifically disclaims responsibility for any damage or loss resulting from improper installation or repair, including labor costs associated with replacing or repairing the product. Customers are encouraged to contact the customer service team for assistance.
Product Specifications
The Lutec 3-Head Outdoor Post Light is constructed from durable, rust-resistant cast aluminum with clear curved glasses. It requires three E26 bulbs, with a maximum wattage of 100 watts per bulb (bulbs are not included). The fixture is designed for outdoor use in all weather conditions. The model number is 6951302012.
Additional Resources
Lutec offers a range of support resources on its website, including frequently asked questions, instruction manuals, CE declarations of conformity, and service components. Users can search for specific products and access relevant documentation. In cases where a product is no longer part of the Lutec portfolio, customers are advised to contact customer service directly. The website also provides access to safety instructions.
Conclusion
The Lutec 3-Head Outdoor Post Light is designed as a durable and functional outdoor lighting solution. Proper installation, adhering to the provided safety guidelines, is essential. Maintenance is minimal, primarily involving cleaning with a damp cloth. Troubleshooting is limited to checking the switch and battery charge. For more complex issues, professional assistance is recommended. Lutec provides customer support through phone, email, and its website, offering access to manuals, FAQs, and other resources.