The Luminette window covering system, as detailed in the provided documentation, offers a combination of sheer fabric and rotating vanes for light control and privacy. Installation involves mounting brackets, installing the SofTrak headrail, and attaching end treatments. Operation is primarily manual, though PowerView remote control functionality is available. This article details the installation process, operational features, and care instructions based on the available documentation.
Getting Started: Components and Preparation
Prior to installation, it is important to unpack and identify all components. The documentation emphasizes handling Luminette fabric with clean hands or disposable gloves to prevent damage. The fabric should not be folded or draped over furniture to avoid wrinkling. Components may be packaged in multiple cartons.
The installation process is dependent on the mounting type. The documentation outlines both inside/ceiling mount and outside mount options. Understanding window terminology, such as jamb and head jamb, is also crucial for proper bracket placement. Correct bracket installation is highlighted as a foundational step for a successful installation.
Installation Procedures
The installation process begins with mounting the installation brackets. The documentation specifies bracket locations for both standard windows and corner or bay windows. For inside/ceiling mounts, precise placement is critical. Outside mounts require consideration of window frame dimensions.
Following bracket installation, the SofTrak headrail is installed. The documentation does not provide detailed steps for this process beyond stating its placement.
End treatments are then attached to swivel plates. These plates are specific to the left (L) and right (R) sides and are secured with rivets. The end treatments should be positioned so the vanes hang straight, with the top of the treatment approximately one inch above the swivel plate.
Operation and Control
Luminette window coverings can be operated manually or with the PowerView remote. The PowerView remote requires battery installation and activation by removing plastic tabs from the battery compartment. The remote features buttons for opening, closing, and rotating the vanes clockwise or counterclockwise. A “Favorite” button allows users to save a preferred sheer/vane position. The documentation details six programmable groups for controlling multiple window coverings.
If vanes do not rotate or rotate incorrectly, the documentation suggests checking that the fabric is fully traversed and that there are no obstructions to vane movement. Protruding window cranks should be replaced with T-cranks. If a vane does not hang correctly, it should be checked to ensure it is fully inserted into the pinion clip.
Fabric Care and Maintenance
Proper care is essential to maintain the appearance and functionality of Luminette window coverings. The documentation provides specific instructions for cleaning, emphasizing the importance of avoiding harsh methods.
Method 1 for cleaning is recommended when the fabric has been removed from the headrail. This involves using a screwdriver to release the spring-latch on the drive Twist to Release assembly.
The documentation cautions against using brush attachments or rigorous vacuuming, as these methods can distort the fabric. Electrostatic cleaning devices are also prohibited. Spot-cleaning is recommended for immediate stain treatment using a clothing stain pre-treatment solution.
For room-darkening vanes, both sides require cleaning, while translucent vanes only need cleaning on the front. Variations in fabric appearance are considered normal and acceptable.
Additional Product Information
Luminette face fabric is available by the yard, up to 123 inches wide, for creating accessories such as top and side treatments, specialty shapes, table rounds, and bed skirts.
The documentation includes a statement of conformity with the EMC directive 2004/108/EC and R&TTE directive 1999/5/EC, referencing a declaration of conformity available on the Hunter Douglas website.
Conclusion
The Luminette window covering system offers a versatile solution for light control and privacy. Successful installation relies on careful component identification, accurate bracket placement, and proper headrail and end treatment attachment. Operation is straightforward, with both manual and remote control options available. Maintaining the fabric’s appearance requires gentle cleaning methods and adherence to the manufacturer’s recommendations. The provided documentation serves as a guide for installation, operation, and care, ensuring optimal performance and longevity of the Luminette system.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.