The Lorex LNWDB1 Series and B862AJ Series wired video doorbells are designed to enhance home security by providing high-definition video and real-time alerts. Installation involves replacing an existing wired doorbell, installing a chime kit, and connecting the device to the Lorex app. These doorbells require an 8-24VAC transformer for power and offer features such as two-way audio and customizable motion detection. This guide details the installation process, component overview, and initial setup steps based on official Lorex documentation.
Understanding the Components and Tools
The Lorex doorbell package includes the doorbell unit with a mounting bracket, a chime kit, various accessories, and a basic toolset. The doorbell itself measures just over four inches in height, almost two inches in width, and one inch in thickness. Additional tools and materials may be required depending on the specific installation environment. These include a voltage tester, wire cutter, wire stripper, needle-nose pliers, a level, electrical tape, masking tape, a pencil or marker, a hammer, paper, a ladder, and a clean cloth.
The B862AJ Series package specifically includes a 4K Wired Video Doorbell, a mounting bracket, horizontal and vertical wedges (15° and 5° respectively), a USB Power Cable, an extension wire, connecting wires, a chime kit, a wire harness, anchors & screws, a 1/4" drill bit, wire caps, and a reset/release pin.
Pre-Installation Preparations
Prior to commencing installation, several preparatory steps are crucial for safety and a successful setup. The first and most important step is to turn off the power to the existing doorbell and chime box at the circuit breaker. It is essential to verify that the power is completely disconnected by testing the existing doorbell – pressing the button should not produce a chime sound.
The existing doorbell should then be removed, and the wiring disconnected. Users should download the Lorex app from the Apple Store or Google Play and create an account if they do not already have one. The Device ID, located on a sticker on the back of the doorbell below the QR code, should be recorded for later use during the app connection process.
Installing the Chime Kit
The LNWDB1 Series doorbell requires the installation of a chime kit within the existing indoor chime box to ensure sufficient power. It is important to verify that the home’s electrical system provides an 8-24VAC transformer. If the existing transformer is incompatible, an 8-24 VAC doorbell transformer must be purchased separately.
Removing the Existing Doorbell and Installing the Mounting Bracket
After turning off the power and installing the chime kit, the next step is to remove the existing doorbell and install the mounting bracket. The provided documentation does not detail the specifics of this process beyond the initial removal of the old doorbell.
Wiring the Doorbell
The wiring process involves connecting the doorbell to the existing doorbell wires. The documentation emphasizes the importance of securely twisting the cable caps to lock the wire connections together. Any exposed wiring must be sealed with electrical tape to prevent short circuits. The doorbell should be left hanging on its wires at this stage, as it needs to be powered on before it can be connected to the Lorex app.
Powering On and App Connection
Once the doorbell is wired, the circuit breaker can be turned back on. This is a necessary step to power the doorbell before connecting it to the Lorex app. Users should wait for the LED indicator on the doorbell to turn solid blue before proceeding.
The app connection process involves opening the Lorex app, tapping the plus (+) icon, scanning the QR code located on the back of the doorbell, and following the in-app instructions. Users will need their Wi-Fi password and the previously recorded Device ID. It is recommended to be standing next to the doorbell during this process to ensure good Wi-Fi coverage.
Final Steps: Mounting and Testing
After successfully connecting the doorbell to the Lorex app, the final steps involve mounting the doorbell to the bracket and testing its functionality. The doorbell is secured to the mounting bracket using the provided security screw and a Torx (star-shaped) screwdriver.
Once mounted, users should test the doorbell to ensure both the local (indoor) and digital (mobile) chimes function correctly when the doorbell is rung. Finally, the doorbell lens should be wiped clean to remove any fingerprints.
Smart Security LED Indicator
The B862AJ Series doorbell features a Smart Security (SS) LED indicator surrounding the call button. This LED provides visual cues regarding the doorbell’s operational status:
- Flashing blue: The doorbell is ready for network connection.
- Flashing blue quickly: The doorbell is pairing to the Lorex account or an event has been detected.
- Solid green: The doorbell is operating correctly.
- Spinning green: The calling function is in use.
- Flashing green: The 2-Way Talk function is in use.
Package Contents Summary
The following is a summary of the contents included in the B862AJ Series package:
- 4K Wired Video Doorbell
- Mounting Bracket
- Horizontal Wedge (15°)
- Vertical Wedge (5°)
- USB Power Cable
- Extension Wire
- Connecting Wires
- Chime Kit
- Wire Harness
- Anchors & Screws (x2)
- 1/4" Drill Bit
- Wire Caps (x3)
- Reset / Release Pin
Conclusion
The Lorex wired video doorbell installation process involves careful preparation, wiring, and app configuration. Following the provided instructions ensures a secure and functional home security solution. Key steps include turning off power at the breaker, installing the chime kit, connecting the wiring, and utilizing the Lorex app for device setup. Proper testing after installation is crucial to verify functionality of both the chime and the app notifications.