Lithonia Lighting offers a diverse range of lighting solutions for residential, commercial, and industrial applications. This article provides installation and safety information for several Lithonia Lighting product series, based on available documentation. The documentation covers recessed emergency exit signs, precise collection fixtures, and various other lighting types including flood lights, lanterns, shop lights, and WF4 recessed lights. Emphasis is placed on safe installation practices and adherence to manufacturer guidelines.
Recessed Emergency Edge Lit LED Exit Signs – Series ELA LRIS 120/277 ELN, ELA 120/277 ELN
The Series ELA LRIS 120/277 ELN and ELA 120/277 ELN are recessed emergency exit signs. Installation requires careful attention to visibility and adherence to safety precautions. The documentation stresses the importance of ensuring adequate color contrast between the sign legend and the wall finish to maintain sufficient visibility.
A caution is provided regarding safety and proper operation, advising users to read and follow all instructions carefully before installation. These instructions do not cover all possible installation scenarios, and contacting Lithonia Lighting or a local distributor is recommended if additional information is needed.
Warnings included in the documentation highlight the risk of electric shock and emphasize that equipment should never be connected to, disconnected from, or serviced while energized. The use of abrasive materials or solvents is also cautioned against, as they may damage the fixture and cause personal injury.
Precise Collection – Series LRP ELN, LRP2 ELN
The Precise Collection, specifically the Series LRP ELN and LRP2 ELN, also requires careful installation. The documentation includes a series of important safeguards that must be followed.
Warnings are provided regarding the risk of electric shock, emphasizing the need to avoid working with energized equipment. Additionally, a warning is given regarding the risk of personal injury due to potentially sharp edges on the product, recommending the use of gloves during installation.
General Installation Procedures
Several sources outline general installation procedures applicable to various Lithonia Lighting fixtures. A fundamental step across multiple fixture types is disconnecting the power supply at the circuit breaker before beginning any work. This precaution is essential for safety.
Wiring procedures involve connecting wires based on color coding: black to black (hot), white to white (neutral), and green or bare copper to ground. Secure mounting is also crucial, utilizing screws or mounting brackets provided with the fixture. After installation, the power should be restored to test the functionality of the new light.
Specific Fixture Installation – Detailed Steps
The documentation details specific installation steps for several fixture types:
- LED Lighting: The process involves choosing the appropriate fixture, preparing the wiring, securing the fixture to the ceiling or wall, and then restoring power for testing.
- Exit Lights: Installation requires locating a power source near an emergency power supply or battery backup. The mounting bracket is then attached, followed by wiring the fixture to the electrical system, ensuring compatibility with the emergency power supply. Finally, the light housing is secured to the bracket, and the emergency mode is tested.
- WF4 Lights: These ultra-thin recessed lights require cutting a ceiling hole using a provided template. The driver box is wired to the electrical system, and the WF4 light is connected to the driver box and pushed into the ceiling opening, utilizing spring clips for secure placement.
- Spotlight Halogen Fixtures: Specific installation instructions for these fixtures are not detailed in the provided documentation.
Product Range Overview
Lithonia Lighting manufactures a wide variety of lighting products, as evidenced by the extensive list of models referenced in the documentation. These include:
- Flood Lights: Models such as ESXF1 ALO, ESXF1 P0, ESXF2 ALO, ESXF3 ALO SWW2 YS DDB, ESXF4 ALO SWW2 YS DDB, ESXF5, FL1-LED-P2-40K-MVOLT-YK-DDBXD-M4, HFM, and HGX LED 2RH ALO SWW2 120 PIR.
- Lanterns: Models including ESX1 LED, LDN4, LDN4 SQ, LDN6, and LDN6 SQ.
- Shop Lights: TWH Series.
- Emergency Lighting: Series ELA LRIS 120/277 ELN, ELA 120/277 ELN.
- Recessed Lighting: WF4 Series.
- Other Fixtures: A variety of other fixtures are listed, including ESXF5, ELT1250NY, ELT627NY, SGLL 24 PIR, VAP, WLTC Series, AFF, CPRB 18LM MVOLT, CPRB 24LM MVOLT, CPRB ALO13 UVOLT SWW9, CPRB ALO14 UVOLT SWW9, CUC8, DSX0, ECBG LED M6, ECRG HO SQ M6, 194994252542, 2679X3, Aeris ASBX, Aeris ASBY, Aeris ASBZ, and Aeris ASF1, Aeris ASF2.
Safety Instructions
The documentation consistently emphasizes safety precautions. General safety instructions include reading and following all instructions, contacting Lithonia Lighting or a distributor if clarification is needed, and avoiding contact with energized equipment. Specific warnings address the risk of electric shock and potential injury from sharp edges. The documentation also cautions against the use of abrasive materials or solvents that could damage the fixtures.
Conclusion
The provided documentation outlines essential installation and safety guidelines for a selection of Lithonia Lighting fixtures. Proper installation requires disconnecting power, following color-coded wiring procedures, securing the fixture, and testing functionality. Specific instructions vary depending on the fixture type, with detailed steps provided for LED lighting, exit lights, and WF4 recessed lights. Adherence to the safety warnings is paramount to prevent electric shock and personal injury. The documentation highlights Lithonia Lighting’s broad product range, catering to diverse lighting needs.