The Cub Cadet Triple Bagger is a high-capacity grass collection system designed for use with Ultima Series ZTX and ZTXS Zero Turn Mowers equipped with 54- or 60-inch cutting decks. This attachment is engineered to improve the efficiency of grass clipping collection by combining a pivoting hood, large-diameter chutes, and three heavy-duty bags with a total capacity of up to 11 bushels. The system leverages the mower’s existing blades and deck design to facilitate the flow of grass clippings into the collection bags, minimizing clogging and maximizing user convenience.
Installation of the Triple Bagger requires careful attention to the specifications and hardware included in the package. The system is compatible with Ultima ZTX models as well as ZTXS models with steering wheels, though the latter requires an additional adapter kit for proper mounting. Installation hardware, instructions, and necessary components such as bags, chutes, weight plates, and a hood are included in the package.
The following sections provide a detailed breakdown of the key components, compatibility requirements, installation process, and practical considerations for users seeking to install the Cub Cadet Triple Bagger.
Key Features and Components
The Triple Bagger system includes several engineered components designed to optimize performance and user experience:
Three Heavy-Duty Vented Bags: Each bag is constructed with a thermoform bottom for added durability and includes an integrated handle for easy removal. Together, the bags provide a total collection capacity of up to 11 bushels of grass clippings.
Integrated Pivoting Hood: This component helps direct clippings into the collection bags and allows for easier access to the bags for monitoring or removal.
Large-Diameter Chutes and Flex Tubing: A 9-inch diameter boot and chute facilitate the free flow of grass and air, reducing the likelihood of clogging or clumping. The use of large-diameter flexible tubing further enhances airflow and prevents blockages.
Weight Plates: These components are used to secure the bags and ensure they remain in place during operation.
Hardware and Installation Instructions: The package includes all necessary mounting hardware and a detailed manual to guide users through the installation process.
Adapter Kit (for ZTXS models only): An additional adapter kit (Model 490-950-C062) is required to mount the Triple Bagger on Ultima ZTXS models. This is not included with the main product and must be ordered separately.
Compatibility and Model Requirements
The Cub Cadet Triple Bagger is specifically designed for use with the following mower models:
- Ultima Series ZTX and ZTXS Zero Turn Mowers
- Cutting Deck Widths: 54 inches or 60 inches
- Model Year Compatibility: 2020 and newer
It is important to verify the model number of the mower before purchasing the Triple Bagger to ensure compatibility. The system is not compatible with earlier model years or different series of Cub Cadet mowers. Additionally, the ZTXS variant requires the separate adapter kit for proper installation.
The Triple Bagger utilizes the mower’s existing blades and deck design to collect clippings, eliminating the need for additional blade modifications or replacements. This integration ensures that the system works in harmony with the mower’s mechanical and airflow dynamics to improve collection efficiency.
Installation Process
Installation of the Cub Cadet Triple Bagger involves several steps that must be followed carefully to ensure the system functions correctly and safely. The following is a general overview of the installation process based on the provided documentation and components included in the package.
Preparation and Inspection: Begin by inspecting all components included in the Triple Bagger package. This includes three bags, a hood, chutes, weight plates, hardware, and installation instructions. Ensure all parts are present and undamaged before proceeding.
Adapter Kit Installation (for ZTXS Models): If the mower is a ZTXS model with a steering wheel, the adapter kit (490-950-C062) must be installed first. This kit includes the necessary mounting brackets and hardware to secure the Triple Bagger to the mower. Follow the manufacturer’s instructions for attaching the adapter to the mower deck.
Mounting the Hood and Chutes: The hood is attached to the mower deck using the provided hardware. The chutes are then connected to the hood and positioned to direct clippings into the collection bags. The large-diameter boot and chute are designed to allow for smooth airflow and reduce the risk of clogging.
Attaching the Bags: The three collection bags are attached to the chutes and secured using the provided weight plates. The bags are designed to pivot and allow for easy access during operation. The integrated handle on each bag facilitates removal when full.
Final Adjustments and Testing: Once all components are installed, make final adjustments to ensure the system is properly aligned and functioning. Test the Triple Bagger by mowing a small area and observing how clippings are directed into the bags. If any adjustments are needed, refer to the installation instructions for guidance.
Operational Considerations
After installation, there are several factors to consider when using the Cub Cadet Triple Bagger to ensure optimal performance and longevity of the system.
Monitoring Bag Fullness: The system includes a sight window that allows users to monitor the level of grass clippings in the bags. This helps prevent overfilling and potential spillage during operation.
Removing and Replacing Bags: When the bags are full, they can be easily removed using the integrated handles. Users should replace the bags with empty ones before continuing mowing to maintain efficiency.
Preventing Clogging: The large-diameter boot and flexible tubing are designed to minimize clogging. However, users should still be aware of potential blockages, especially when mowing thick or wet grass. If clogging occurs, the system should be stopped and cleared manually.
Weight Distribution: The weight plates help stabilize the bags during operation. Users should ensure that the weight plates are properly installed and adjusted to prevent sagging or misalignment.
Storage and Maintenance: After use, the Triple Bagger should be cleaned and stored in a dry area to prevent damage from moisture or debris. The hood and chutes should be inspected periodically for wear or damage and replaced if necessary.
Performance and Efficiency
The Cub Cadet Triple Bagger is designed to enhance the efficiency of grass clipping collection during mowing operations. By leveraging the mower’s top discharge deck design, the system allows clippings to flow freely from the deck, up through the chutes, and directly into the bags. This design minimizes the need for manual raking or blowing, saving users time and effort.
The high capacity of the system (11 bushels total) means users can cover larger areas without frequently stopping to empty the bags. The use of three separate bags allows for even distribution of weight and ensures that clippings are collected more evenly across the mower’s cutting deck.
The Triple Bagger also helps reduce the risk of clogging through the use of large-diameter chutes and flexible tubing. The pivoting hood further enhances airflow and facilitates the smooth transfer of clippings into the bags. These features collectively contribute to a more efficient and user-friendly mowing experience.
Safety and Compliance
Safety is a critical consideration when installing and using the Cub Cadet Triple Bagger. The system is designed to meet industry standards for lawn and garden equipment, and it includes several features to enhance user safety during operation.
Secure Mounting: The system is securely attached to the mower using the provided hardware and, when applicable, the adapter kit. This ensures that the Triple Bagger remains in place during operation and reduces the risk of detachment or instability.
User Instructions: The installation instructions provided with the Triple Bagger emphasize proper mounting and usage to ensure safe operation. Users are advised to follow these instructions carefully to avoid potential hazards.
Weight Management: The weight plates included in the package are used to secure the bags and prevent them from shifting during operation. This helps maintain balance and stability, reducing the risk of tipping or uneven weight distribution.
Material Quality: The bags and other components are constructed from durable materials designed to withstand normal use and exposure to the elements. This helps ensure the system remains functional and safe over time.
Customer Support and Warranty
Cub Cadet provides customer support for the Triple Bagger through its Right Part Pledge program. This initiative ensures that if a user purchases the wrong part or attachment, Cub Cadet or an authorized reseller will work with the customer to identify the correct part and provide a free exchange. This service is available for purchases made through Cub Cadet or authorized online resellers and is subject to specific terms and conditions.
In addition, the company offers fast, free shipping for parts orders over $50, with standard shipping averaging three business days. Expedited shipping is also available for urgent needs. Customers can return unused parts within 90 days under the company’s hassle-free return policy, provided they follow the outlined procedures.
For further assistance, users can contact Cub Cadet through its customer service channels or access technical support through its website. These resources are available to help users with installation, troubleshooting, and general inquiries about the Triple Bagger system.
Conclusion
The Cub Cadet Triple Bagger is a high-capacity grass collection system designed for use with Ultima Series ZTX and ZTXS Zero Turn Mowers. With a total collection capacity of up to 11 bushels, the system includes three heavy-duty bags, a pivoting hood, large-diameter chutes, and weight plates to ensure efficient and user-friendly operation. The system is compatible with 54- and 60-inch cutting decks and is engineered to work in conjunction with the mower’s existing blade and deck design to enhance airflow and reduce clogging.
Installation of the Triple Bagger requires careful attention to the provided hardware and instructions, with an additional adapter kit needed for ZTXS models. Once installed, users can benefit from improved efficiency, reduced manual labor, and a more streamlined mowing experience. The system also includes safety features such as secure mounting, weight management, and durable materials to ensure safe and reliable operation.
For users seeking to enhance their lawn care experience, the Cub Cadet Triple Bagger offers a practical and effective solution. By leveraging the system’s design and components, users can enjoy a more efficient and less labor-intensive mowing process while maintaining a clean and well-kept lawn.