Levolor is a manufacturer of custom blinds and shades. Installing these blinds, while potentially appearing complex, can be accomplished with a straightforward process. This article details the installation procedure for Levolor blinds, based on available documentation. The process involves bracket installation, headrail mounting, valance attachment, and wand assembly.
Installing the Brackets
The initial step in installing Levolor blinds involves securing the mounting brackets. These brackets are typically attached to the upper inside corners of the window frame. The documentation specifies drilling two screws into the side of each bracket to secure it. Prior to drilling, creating starter holes is recommended to facilitate easier screw insertion. If a power drill is used, caution is advised to keep hands clear of the screw path. Alternatively, a screwdriver can be employed for bracket installation if a power drill is not preferred.
For larger blinds, a support bracket may be included. If present, this support bracket should be positioned at the top center of the window after the mounting brackets are in place. The purpose of the support bracket is to prevent sagging in the middle of the blinds.
Wand Stem Insertion
Before mounting the headrail, the wand stem must be inserted into the designated location on the blinds. The location for wand stem insertion is indicated by a sticker labeled “Insert Wand Stem,” typically found on the upper left corner of the blinds when laid flat. Removing the sticker reveals the insertion point for the wand stem, which is included with the blind’s packaging.
Sliding the Headrail into the Brackets
Once the brackets are securely fastened, the headrail can be mounted. The brackets should be in an open position to receive the headrail. The blinds should be lifted by the headrail, ensuring the wand stem faces the installer. The headrail is then slid into the brackets, and the brackets are folded down to lock the headrail in place.
Valance Attachment
The valance, an aesthetic component of the blinds, is attached to the top of the headrail. Valance clips are first secured to the headrail. The valance is then snapped onto these clips, both at the top and bottom, to complete the attachment. The valance is designed to enhance the overall appearance of the blinds.
Wand Assembly and Attachment
The final step in the installation process involves assembling and attaching the wand. The wand handle is inserted into the wand, and an Allen wrench (provided with the blinds) is used to tighten the connection. The Allen wrench is inserted into the set screw on the wand and turned in a circular motion to secure the handle. Once assembled, the wand is hooked onto the wand stem near the top of the blinds.
Preparation and Considerations
Prior to commencing the installation, it is recommended to thoroughly review the included installation instructions. This familiarization will provide a foundational understanding of the components and the overall installation process. The documentation emphasizes the importance of understanding each component before beginning.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.