The Leviton W5601 is a device rated for 15A at 120/277V AC. Installation involves removing a wallplate, identifying and connecting wires, securing the device with screws, and restoring power. The documentation emphasizes the use of copper or copper-clad wiring and provides specific torque requirements for screw tightening. Cleaning instructions advise against spraying liquids directly onto the product and recommend using a damp cloth with mild soap. A limited warranty is offered, covering defects in materials and workmanship for two years from the purchase date, excluding labor costs for removal or reinstallation.
Installation Procedure
The installation process for the Leviton W5601 involves several steps, beginning with the removal of the existing wallplate. A flat-head screwdriver should be inserted into the notch located at the bottom of the wallplate to facilitate its removal. Following wallplate removal, the next step is to identify the wires present in the electrical box. The documentation illustrates wiring configurations for both “To Load” and “From Branch Circuit” connections, identifying the neutral, load, ground, and line wires.
Wiring connections can be made using either back wiring or side wiring techniques. For back wiring, the insulation should be removed approximately 5/8 in. (1.6 cm) per the strip gauge indicated on the device. Wires should be looped clockwise 3/4 around the terminal screws and tightened with 14-18 in.-lb of torque. Side wire terminal screws are designed to accommodate #12-14 AWG copper or copper-clad wire.
Mounting the device requires attention to torque specifications. Mounting screws should be tightened to 14-16 in.-lb to ensure a proper seal. When installing the device in an FS or FD weatherproof box, mounting should occur at the two center screw locations and the additional four screw locations using the six provided screws. In these instances, extra material in the additional four screw mount locations may need to be removed using a punch or a 9/64 in. drill bit. After mounting, the wallplate is installed, ensuring the notch is positioned at the bottom. Finally, power is restored at the circuit breaker or fuse, completing the installation.
Wiring Specifications and Torque Requirements
The Leviton W5601 is designed for use with copper or copper-clad wire only. The documentation specifies acceptable wire gauges for side wiring as #12-14 AWG. Proper torque application is critical for ensuring a secure and reliable connection. The documentation details two torque specifications: 14-18 in.-lb for side wire terminal screws and 14-16 in.-lb for mounting screws. Adhering to these torque values is essential for maintaining the integrity of the electrical connection and preventing potential hazards.
Safety Precautions and Cleaning Instructions
Several safety precautions are outlined in the provided documentation. Users are explicitly warned against spraying liquids directly onto the product. To clean the device, a damp cloth with mild soap is recommended. The documentation also cautions against the use of disinfecting products, including foggers, sprays, or other atomized cleaning agents, as these may damage the product.
The documentation also includes a disclaimer regarding improper use, stating that the warranty is void if the product is installed improperly, in an improper environment, overloaded, misused, opened, abused, or altered in any manner. Operation under normal conditions and adherence to all labels and instructions are also required to maintain warranty validity.
Warranty Information
Leviton provides a two-year warranty to the original consumer purchaser, covering defects in materials and workmanship under normal and proper use. Leviton’s obligation under the warranty is limited to correcting defects through repair or replacement, at their discretion. The warranty excludes labor costs associated with the removal or reinstallation of the product.
The warranty does not cover damage resulting from improper installation, use in an unsuitable environment, overloading, misuse, unauthorized modification, or failure to follow provided instructions. Further details regarding the warranty can be found at www.leviton.com or by calling 1-800-824-3005.
Canadian Warranty and Support
For Canadian residents, warranty information and product returns should be directed to Leviton Manufacturing of Canada ULC. Contact can be made in writing to the Quality Assurance Department at 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9, or by telephone at 1-800-405-5320.
Product Specifications
The Leviton W5601 is rated for 15A at 120/277V AC. The documentation does not provide additional specifications such as dimensions, weight, or operating temperature range.
Patents
The documentation notes that patents covering the product, if any, can be found on the Leviton website at www.leviton.com/patents.
Conclusion
The Leviton W5601 is an electrical device requiring careful installation and adherence to safety guidelines. Proper wiring techniques, torque specifications, and cleaning procedures are crucial for ensuring safe and reliable operation. The provided documentation outlines these procedures and details the terms of the limited warranty offered by Leviton. Users should consult the full documentation available on the Leviton website for comprehensive information.