Installing a Level Lock offers enhanced security and convenient access to a home. The installation process, when executed carefully, allows users to upgrade to a smart lock system, providing both convenience and peace of mind. This guide details the steps required for successful installation, intended for both experienced DIY enthusiasts and first-time installers.
Preparing for Installation
Prior to beginning the installation, it is essential to gather the necessary tools. These include a screwdriver, a measuring tape, and the Level Lock installation guide provided with the product. Checking for any additional tools specified in the installation guide is also recommended. Having all tools readily available streamlines the process and minimizes interruptions. The installation requires a compatible iOS or Android device. Components included with the Level Lock are tailpiece adaptors, Motor A, B, and C, a bolt, a strike plate, two strike plate screws, two bolt screws, and a CR2 battery.
Removing the Existing Lock
The first step involves removing the existing lock mechanism. This begins by unscrewing the screws on the interior side of the lock using a screwdriver. All screws and components should be carefully set aside to prevent loss. Once the screws are removed, the interior and exterior elements of the lock can be gently pulled apart from the door. After separating the visible parts, the latch mechanism is removed by unscrewing it and sliding it out of the door edge. It is important to inspect the door to ensure it is clean and free of debris, preparing it for the new lock installation.
Door Setup Inspection
Following the removal of the existing lock, the door itself requires inspection. This includes verifying proper alignment and ensuring the holes for the lock and latch match the specifications of the new hardware. A crucial measurement is the backset, defined as the distance from the edge of the door to the center of the hole for the lock. Common backset measurements are 2 3/8 inches or 2 3/4 inches, and it must be confirmed that the door’s setup is compatible with the Level Lock. Additionally, the thickness of the door should be checked to ensure it falls within the range supported by the lock. Adjustments or modifications to the door may be necessary to ensure a proper fit.
Installing the Level Lock Bolt
The installation process continues with the Level Lock bolt. The bolt should be aligned with the hole in the edge of the door, ensuring the word “UP” marked on the bolt faces upwards for correct orientation. The bolt is then carefully inserted into the hole until it is flush with the edge of the door. It is secured using the provided screws, which should be tightened evenly to avoid misalignment. After securing the bolt, it should be tested by sliding it in and out to confirm smooth operation. If resistance is encountered, the alignment should be double-checked and adjusted before proceeding.
Sliding in the Lock Mechanism
With the bolt installed, the lock mechanism is aligned and gently slid into place through the designated opening on the door. Proper orientation is critical, with the keyhole or thumb turn positioned on the appropriate side as per the instructions. Once inserted, the mechanism should fit snugly and align with the bolt. Any resistance encountered should prompt a re-check of the mechanism’s orientation and the bolt’s placement before securing the lock mechanism.
Attaching the Exterior Side
(The provided documentation does not detail the steps for attaching the exterior side of the Level Lock. Further information is required to complete this section.)
Testing the Lock
After installation, thorough testing is essential. This begins by ensuring the device powers on correctly and responds to commands. Users should follow the setup instructions to program a temporary code or connect the lock to their smart home system, if applicable. The test code or registered key should be used to lock and unlock the device multiple times, verifying smooth operation and proper engagement of the locking mechanism. If the lock has additional features, such as remote control or app integration, these functionalities should also be verified. Any issues encountered should be addressed by consulting the user manual or the manufacturer’s support resources.
Enabling HomeKit
To enable HomeKit functionality, the provided code should be scanned during the installation steps within the Level app.
Safety and Compliance
The Level Lock complies with part 15 of the FCC Rules. Operation is subject to two conditions: the device must not cause harmful interference, and it must accept any interference received, including interference that may cause undesired operation. Additional information on FCC compliance can be found at www.level.co.
Benefits of Installing a Smart Lock
Installing a smart lock, such as the Level Lock, offers several benefits. These include convenience, eliminating the need for physical keys, and the ability to control the lock from a smartphone. This provides easy unlocking and locking with just a few taps. The installation process enhances home security while maintaining a sleek and modern aesthetic.
Conclusion
Successful installation of a Level Lock requires careful attention to detail and proper execution of each step. From preparing the door to testing the lock’s functionality, each phase is crucial. Always referring to the user manual and utilizing the manufacturer’s support resources when encountering challenges is recommended. With accurate installation, users can enjoy the convenience, security, and advanced features that the Level Lock offers.