The Leer 100XR truck cap is a popular aftermarket accessory for pickup trucks. Available through authorized Leer dealers, proper installation and wiring are crucial for optimal performance and safety. This article details available information regarding the installation, wiring considerations, roof rack load capacities, and general product support for the Leer 100XR, based solely on provided documentation.
Installation Procedures and Dealer Authorization
Leer explicitly states that installations should be performed by Authorized Leer Dealers. The company only authorizes and warrants installations completed by these trained professionals. This recommendation stems from the need for proper wiring, adjustments, and overall fitment to ensure the cap functions as intended and maintains its structural integrity. While a user may inquire about self-installation, Leer strongly advises against it, citing potential impacts on performance, appearance, and safety. Documentation indicates that installation instructions and owner’s manuals are available for various Leer models, including the CAB HIGH BED CAP, CAB HIGH PREMIUM BED CAP, and CAB HIGH SPORT BED CAP, though specific instructions for the 100XR are not directly provided within the source material.
Wiring Considerations for the 100XR
The documentation addresses wiring specifically in relation to the auto-lock feature available on some 100XR models. A user inquiry on an online forum details a 2016 Ford F-150 SCREW with a 5.5-foot bed and a used Leer cap equipped with this feature. The question centers on the optimal location to run the wiring for the auto-lock system. The forum post suggests that previous installations (specifically those from 2010 or earlier) commonly connected wires at the fuse box located on the driver’s side kick panel. However, the user notes a potential complication: the wiring is already present at the tailgate.
The documentation does not provide a definitive answer regarding the best wiring location. It simply acknowledges the question and directs users to consult with an authorized Leer dealer for professional installation. The source material does not detail the specific wiring diagram or electrical requirements for the auto-lock feature. It also does not specify the gauge of wire required or any necessary fusing.
Roof Rack Load Capacity
Leer factory-installed Thule roof rack systems have specified weight capacities that vary depending on the model. For the Leer 100XR, along with models 100XQ, 100XL, 100R, 100RCC, 180, 180CC, and 122, the following load limits apply:
- Thule AeroBlade: Maximum load capacity of 220 lbs.
- Tracker II Roof Rack systems: Maximum load capacity of 165 lbs.
The documentation emphasizes that these figures represent the maximum load capacity of the rack itself. Users must also consider other critical factors related to safely carrying and securing loads, and are directed to consult the owner’s manual provided with their specific Thule roof rack system for comprehensive guidance. The documentation does not provide details on how to calculate total load capacity when factoring in the weight of the cap itself.
Measuring the Truck Bed for Proper Fitment
Prior to purchasing a Leer tonneau cover or truck cap, accurate measurement of the truck bed is essential. The recommended procedure involves the following steps:
- Place the end of a measuring tape at the bulkhead of the truck bed.
- Measure along the bed rail to the inside edge of the top of the tailgate.
- Select the fitment option closest to the measured value, as truck manufacturers often round bed sizes.
This information is provided to ensure a proper fit and avoid compatibility issues. The documentation does not specify whether these measurements apply specifically to the 100XR model or to all Leer products.
Product Support and Replacement Parts
Leer provides support for replacing lost logos on truck caps or tonneau covers. Customers can first check with their local Leer dealer, as they frequently stock logos. If the dealer does not have the required logo in stock, customers can email Leer directly with their request, including their street address. Leer states that logos are replaced as a courtesy to customers whenever possible. The documentation does not detail the process for obtaining other replacement parts or warranty information.
Available Documentation and Manuals
ManualsLib lists over 37 Leer manuals available for download. These manuals cover a range of products, including:
- R290 (Installation, Operation And Service Manual)
- Pace Edwards BEDLOCKER (Installation Instructions Manual)
- 1LG0300000 (Owner's Manual)
- 217988 (Installation Instructions & Owner's Manual)
- 650112 (Manual)
- CAB HIGH BED CAP (Installation Instructions & Owner's Manual)
- CAB HIGH PREMIUM BED CAP (Installation Instructions & Owner's Manual)
- CAB HIGH SPORT BED CAP (Installation Instructions & Owner's Manual)
- HF650M (Installation Manual)
Additionally, manuals are available for Leer’s freezer and merchandiser product lines, including models R290 PL, R290 TD, CR115, CR150, S040UASPF, S040UASPR, S085UASPF, S085UASPR, S40, S85, and Vending machines R290. However, a dedicated installation or owner’s manual specifically for the Leer 100XR model was not found within the provided source material.
Conclusion
The Leer 100XR truck cap requires professional installation by an authorized Leer dealer to ensure proper functionality, safety, and warranty coverage. Wiring for features like the auto-lock system requires careful consideration, and while previous methods involved connecting to the fuse box, the optimal location may vary. The 100XR, when equipped with a factory-installed Thule roof rack, has a maximum load capacity of 220 lbs for the AeroBlade system and 165 lbs for the Tracker II system. Accurate truck bed measurements are crucial for a proper fit. Leer provides support for replacing lost logos and offers a variety of manuals for its products, though a specific manual for the 100XR was not available in the provided documentation.