The Larson Brisa Single Panel Retractable Door is a surface-mounted screen door designed for single-hinged doors. It offers a means of allowing fresh air into a home while keeping insects out. This guide details the installation process, components, and basic maintenance procedures based on the provided owner’s manual. The product includes a Limited Lifetime Warranty, excluding damage to the screen itself.
Understanding the Brisa Retractable Screen Door
The Brisa Retractable Screen Door is intended for use on inswing or outswing single doors. It is not designed to provide security or restrain objects, animals, or persons. The system utilizes a retractable screen housed within a frame that can be extended and retracted as needed. Proper installation is crucial for optimal functionality. The documentation emphasizes the importance of reading all instructions before beginning the installation process.
Parts List and Terminology
The Brisa Retractable Screen Door consists of several key components. Familiarity with these parts is essential for a successful installation. The documentation references the following:
- Screen Housing: The main frame that contains the retractable screen mechanism.
- Decorative Housing: A flange attached to the Screen Housing.
- Sill Plate Assembly: Located at the bottom of the door opening.
- Sill Plate Extender: Used to fill gaps around the Sill Plate Assembly.
- Track: Guides the movement of the screen.
- Slider Bar: Facilitates the extension and retraction of the screen.
- Screen and Slider Bar End Caps: Components that thread through the Tracks.
- Housing Screws: Used to secure the Screen Housing and Decorative Housing flange. Specifically, #6 x 1-1/4” screws are mentioned.
Installation Procedure
The installation process involves assembling the components and securing them to the door frame. The following steps are outlined in the provided documentation:
- Assemble Components: Remove all tape and packaging material. Momentarily extend the Slider Bar by 2 inches. Insert one end of each Track into the end of the Screen Housing. Allow the Slider Bar to retract. Insert the Track, with the notch facing forward, all the way into the corner, ensuring the Screen and Slider Bar End Caps thread through the Tracks.
- Extend Housing: Extend the Housing to the left and right evenly until both flanges are snug against the edges of the door jamb.
- Secure Screen: Insert screws into the pre-drilled screw holes in the Screen Housing and Decorative Housing flange to hold the frame in place. It is important not to overtighten the screws.
- Sill Plate Installation: Center the Sill Plate Assembly on the door sill. Slide the Sill Plate Extender to each side to fill any gaps.
The documentation specifically notes that this guide describes a surface mount installation. It does not cover other potential installation methods.
Maintenance and Care
The Brisa Retractable Screen Door requires minimal maintenance. The documentation recommends periodically vacuuming dirt and debris from the tracks. It explicitly advises against using oily lubricants, such as WD-40, as these can attract dirt and impede operation. However, occasional use of a silicone-based lubricant is acceptable if needed.
Warranty Information
LARSON Brisa Retractable Screen Doors are covered by a Limited Lifetime Warranty. This warranty does not cover damage to the screen, such as tears. Labor costs and reinstallation fees are also not covered under the warranty. Product registration is encouraged and can be completed at www.LARSONdoors.com/Register.
Frequently Asked Questions
The provided documentation includes a brief Frequently Asked Questions (FAQ) section. The following question and answer are included:
Is maintenance required on my Brisa Retractable Screen Door?
Dirt and debris should be vacuumed out of the tracks periodically. Do not use oily lubricants (i.e., WD40) on the track, as this may attract dirt and hinder operation. If needed, occasional use of a silicone-based lubricant is acceptable.
Conclusion
The Larson Brisa Retractable Screen Door offers a convenient solution for enjoying fresh air while keeping insects out. Proper installation, following the steps outlined in the owner’s manual, is essential for optimal performance. Regular maintenance, primarily vacuuming the tracks and avoiding oily lubricants, will help ensure the longevity of the product. The Limited Lifetime Warranty provides coverage against manufacturing defects, excluding screen damage.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.