Kraus offers a range of plumbing fixtures, including sinks, faucets, and drains. Installation procedures vary depending on the specific product. This article details installation instructions and maintenance information based on available documentation. Customers are advised to contact Kraus customer service at 800-775-0703 or [email protected] for assistance, and professional installation is recommended.
Sink Dimensions and Parts Lists
Kraus manufactures sinks in various dimensions. The KHF200-30 model is available in lengths of 27”, 30”, and 33”, with a consistent width of 686mm (27”) and a depth of 29-3/4” (756mm). Specific dimensions for each model are as follows:
- KHF200-30: 27” x 686mm x 29-3/4” x 756mm x 10”
- KHF200-33: 33” x 762mm x 32-7/8” x 835mm x 10”
- KHF200-36: 30” x 838mm x 35-7/8” x 911mm x 10”
Parts lists vary depending on the sink model, but commonly include a cut-out template, bottom grids, and a drain (BST-1 for single bowl sinks).
Drain Installation
Kraus offers several drain models, including ST-1, ST-2, and BST-1, and BST-2. Each model includes components such as a strainer cover, screw, metal strainer, foam gasket, and rubber gasket, along with a main body. The diagrams and parts lists provided in the documentation detail the arrangement of these components.
Faucet Installation
Faucet installation involves several steps. The installation process differs slightly depending on whether a deck and putty plate are used.
Base Installation
When installing the base without a deck and putty plate, the base (D) is inserted into the sink or countertop with “FR↑NT” facing forward. Screws on the base are then tightened using a 4mm hex wrench (J). If a deck and putty plate (C) are used, a bead of clear silicone sealant (not included) is applied around the edge of the putty plate before securing it to the sink or countertop. The base (D) is then inserted into the hole of the deck and putty plate.
Connecting Plumbing
After the base is secured, the spray hose (E) is inserted into the small hole of the base (D). Hot and cold waterlines (G) and the supply hose (F) are inserted one by one into the large hole of the base. The faucet body (B) is aligned with the arrow on the base (D) to ensure proper connection.
Quick Connectors
Kraus faucets utilize Quick Connectors for hose connections. Installation and removal procedures for these connectors are detailed in video tutorials available on the Kraus website. These connectors facilitate easy attachment and detachment of the spray hose and waterlines.
Dispenser Installation
For sinks equipped with a soap dispenser (GDA-1), the dispenser base (b) is installed into the countertop hole with a rubber washer A (c) attached. Rubber washer B (d) and the mounting nut (e) are then re-installed from underneath the countertop and tightened with an adjustable wrench until snug. The dispenser bottle (f) is screwed onto the dispenser base (b) from underneath, and then filled with 12 ounces of soap.
General Installation Guidelines
The documentation emphasizes that the step-by-step guidelines provided are general references. Kraus cannot be held liable for discrepancies encountered during installation. Hiring a licensed professional for installation is strongly recommended. Before beginning installation, it is crucial to ensure all necessary parts are present by checking the diagram and parts list. If any parts are missing or damaged, customers should contact Kraus Customer Service at 800-775-0703 for replacements.
Troubleshooting
If a Kraus faucet does not function correctly after careful installation, the documentation provides basic troubleshooting steps. Leaking from the spray head may indicate a problem with the Quick Connect (I), which may need to be removed and re-secured.
Care and Maintenance
Kraus recommends against cleaning products containing soaps, acids, polishes, abrasives, or harsh cleaners. The aerator should be unscrewed and cleaned when necessary. Customers are encouraged to download the Kraus Care & Maintenance Guide from http://www.kraususa.com/maintenance for detailed cleaning instructions.
Customer Support and Resources
Kraus provides customer support via phone (800-775-0703) and email ([email protected]). Customer service hours are Monday – Friday, 9am – 8pm EST. The Kraus website (www.kraususa.com) offers additional resources, including product reviews and installation videos. Separate contact information is available for plumbing contractors and trade professionals ([email protected], 516-801-8955).
Product Videos
Kraus provides a series of instructional videos on their website (https://www.kraususa.com/videos) covering topics such as kitchen faucet installation, workstation sink features, and waterfall faucet maintenance. These videos demonstrate the installation and removal of the Kraus Quick Connector, as well as provide an overview of Kore workstation sinks and Artec PRO commercial-style faucets.
Conclusion
Kraus offers a variety of sinks and faucets with specific installation procedures. Proper installation, utilizing the provided guidelines and recommended tools, is crucial for optimal performance. Customers are encouraged to utilize the available customer support resources and maintenance guides to ensure the longevity and functionality of their Kraus products. Professional installation is recommended to avoid potential issues and ensure compliance with local plumbing codes.