The Knoll Antenna Workspaces system comprises a range of desks, tables, screens, and storage solutions designed for modern office environments. Installation involves specific tools and techniques, with components identified by pattern numbers for accurate ordering of replacement parts. The system utilizes an installation gauge (YBIG) to ensure consistent and accurate assembly. This article details the installation procedures, component specifications, and available options based on provided documentation.
Installation Gauge (YBIG) Applications
The installation gauge, designated YBIG and supplied in packages of five, is a critical tool for precise installation of Antenna Workspaces. The documentation outlines four primary applications for this gauge:
- Top Positioning over Rails: The gauge facilitates accurate placement of worksurfaces over supporting rails. The worksurface V cutout is positioned snugly against the rail’s side, while the edge of the top tab aligns with the desk top’s edge.
- Rail Positioning over Peds: The gauge assists in positioning rail locations over pedestal bases (peds), ensuring correct alignment.
- Fence Bracket Alignment: The gauge is used to align rails at fence brackets relative to the top position.
- Leg Assembly Positioning: When designs specify inset legs (5 ½" from the desk top’s end), the recessed portion of the gauge rests against the rail’s end (with or without an end cap), and the guide’s end aligns with the cradle’s outer edge.
Desk and Table Configurations
The Antenna Workspaces system supports various desk and table configurations, including:
- Desk (Inset Legs)
- Table
- Desk with Return (Inset Leg on Return)
- Table Desk with Return (Flush Leg on Return)
- Table Desk or Desk with Bridge
- Desk with Extension Top or Cabinet (With Legs Under Worksurface)
- Desk with Above Desk Extension Cabinet (With Legs under Cabinet)
Component Details: End Panels and Bases
Antenna Telescope End Panels are available in various specifications, accommodating 56", 62", and 68" widths. A 1" space is defined between the end panel and the edge of the height-adjustable crossbar. End panels require adjacent Telescope laminate, patterned, or woodgrain laminate worksurfaces, or a ½" specification.
Telescope single sided tables are supported by a pair of rails and can be configured in four ways. End panels are optional for single sided tables.
Cable Management
Cable management is addressed through the use of wire basket covers and upper tab-mounted wire basket assemblies. Installation involves foam tape (A) and bottom snaps, followed by rotating the components to engage the wire basket cover pair. The documentation illustrates a section view showing the engagement of the 6" deep baskets.
Fence Leg and Stabilizer Foot Installation
Fence legs and stabilizer feet are integral components of certain configurations. The installation process involves attaching a glide (B) to the leg (A) using ¼-20 x 1 ¼" self-tapping screws (C). Exploded views detail the assembly process, including the positioning of the stabilizer foot.
Desk Support Adapters and Rails
Fence-Antenna legs and stabilizer feet are used with desk supports. Desk supports for 25"H or 28 ½"H fences utilize fence-to-plate weldments (A) and fence end support cradles (B) for 25"H fences, or desk-to-pedestal cradles (C) for 28"H fences. Parts lists identify the specific pattern numbers for each component.
Stanchion Mounted Storage
Stanchion-mounted storage options are available for Big Tables. The assembly involves a stanchion extrusion (A), stanchion base (B), stanchion top plate (C), spring nut (D), M6 x 25mm machine screw (E), and ¼-20 x 1.75" Torx head self-tapping screw (F). Partially exploded views illustrate the assembly process from both above and below.
Mounting Considerations
Knoll products are designed for mounting on suitable supporting structures, such as cinder block, wood stud, or steel stud walls. The documentation emphasizes that Knoll does not accept responsibility for inadequate mounting surfaces. Drywall must be applied to a supporting structure.
CPU Holder Mount Kits
Knoll CPU holder mount kits are intended for use exclusively with KnollExtra CPU Holders. Installation involves positioning CPU holder adaptor brackets (A) on the track and securing them with appropriate hardware. Phillips #2 and #3 bits are required for installation.
Ordering Replacement Parts
To order replacement parts, users must complete a Knoll Service order, referencing the pattern number. The Finish Code Customer Service Representative should be consulted for accurate ordering information.
Conclusion
The Knoll Antenna Workspaces system offers a flexible and adaptable solution for modern office environments. Proper installation relies on the use of the installation gauge (YBIG) and adherence to the specified procedures for each component. Understanding the various desk and table configurations, along with the correct installation techniques for end panels, legs, cable management, and storage options, is crucial for a successful and durable installation. Accurate pattern number identification is essential for ordering replacement parts.