The KitchenAid 27-inch single electric wall oven requires specific procedures for installation and door removal, as detailed in the provided documentation. These instructions are intended for installers and cover precautions to avoid damage to the oven, flooring, and the oven itself. The documentation also outlines the process for removing and replacing the oven door, emphasizing the need for care due to the door’s weight. This article summarizes the key steps and considerations based on the available materials.
Installation Precautions
Prior to installation, several precautions must be observed to prevent damage. The documentation stresses the importance of not removing side door spacers until the oven is ready for installation, as removing them prematurely could cause the door to shift and damage the latch. Similarly, the oven should not be removed from its bottom base pad until installation is imminent, as setting it directly on the floor may cause damage.
The documentation explicitly advises against lifting or moving the oven by the door handle(s) or control panel. These components are not designed to bear the weight of the appliance and could be damaged. The documentation also notes the importance of reading installation instructions before beginning work to ensure proper performance and warranty protection. Cabinet construction must be appropriate for the oven, with a solid bottom or two runners to support its weight.
Oven Door Removal
Removing the oven door is a necessary step in some installations. The documentation provides detailed instructions for this process. It is crucial to prepare a flat, soft surface – such as a blanket or the corner post from the packaging – to place the door on during removal. The door is described as heavy, necessitating caution during handling.
The removal process involves rotating the door hinges from a locked to an unlocked position. This is achieved by depressing a finger tab in the hinge area, lifting the tab away from the door liner, and sliding it toward the top of the oven door. This step must be repeated on both sides of the door. Once the hinges are unlocked, the door can be pulled toward the user and then removed. A slight side-to-side shift may be necessary during removal.
Oven Door Replacement
Replacing the oven door follows a reverse procedure. Using both hands, the edges of the oven door are grasped, and the hinges are simultaneously inserted into the oven cavity slot. A gentle side-to-side shift may be required to ensure proper alignment.
After the door is fully inserted, it should be opened completely. The hinges should then be rotated from an unlocked to a locked position. The door should be gently swung upward to close. If resistance is encountered during closing, the hinges should be checked to ensure they are fully locked. The documentation notes that the door should not be forced closed.
Detailed Door Hinge Operation
The documentation provides specific instructions regarding the operation of the door hinges. It notes that the instructions cover different models, and the hinge may vary slightly in appearance. The process of rotating the hinges from locked to unlocked involves depressing a tab, lifting it, and sliding it. This action releases the door for removal or adjustment. The documentation includes a visual aid (referenced as Fig. 1 in Source [2]) illustrating this process.
Cabinet Dimensions and Specifications
The documentation references the need for appropriate cabinet dimensions for installation. Specific illustrations and tables detailing these dimensions are mentioned, but not provided within the source material. The documentation also states that specifications are subject to change without notice. It indicates that the documentation was prepared in 1969 by KitchenAid, Inc. and printed in the U.S.A.
Final Checklist for Installers
Source [2] references a “FINAL CHECK LIST” intended for installers. However, the contents of this checklist are not detailed in the provided documentation. The documentation emphasizes the importance of leaving these instructions for use by the local electrical inspector.
Conclusion
The provided documentation outlines essential procedures for the installation and door handling of the KitchenAid 27-inch single electric wall oven. Key takeaways include the need for careful handling to avoid damage during installation, a specific process for removing and replacing the oven door due to its weight, and the importance of proper hinge operation. Installers are advised to consult the complete installation instructions and adhere to all safety precautions. The documentation also highlights the need for appropriate cabinet construction and adherence to local electrical inspection requirements.