Kirsch offers a variety of drapery hardware, including curtain rods and traverse rods, requiring specific installation techniques. The process involves bracket installation, rod placement, and, in some cases, center support installation. Proper installation ensures the hardware functions correctly and the drapes hang as intended. This article details the installation procedures based on available documentation.
Bracket Types and Installation
Kirsch curtain rods utilize several bracket types designed for different applications. For traverse rods, a drop-in style bracket is frequently used, facilitating easy leveling and installation. Standard Kirsch curtain rods employ zinc-plated installation brackets. For drapes or valances with extended returns, bracket extension kits are available to increase clearance.
Installation begins with marking the bracket locations, utilizing the screw holes in the bracket as a guide. Once brackets are temporarily hung, the rod’s operation should be checked, and the center support location marked using the rod as a guide. Specific bracket types include Tekno 25, Tekno 40, Nexgen, Kontur, and Invisible brackets, available in single and double configurations, with Euro track options for some models. Leverlock, Professional, Heavy Duty H, Principal, Motiva, Decor 1, and Decor 2 brackets are also available, each suited to different mounting scenarios. Installation instructions are available for ceiling and wall mounting options for Decor 1 and 2 brackets. A video resource is available for decorative bracket installation (Tekno 25, 40, Nexgen, Kontur).
Mounting Locations
Three typical locations exist for installing curtain rods or traverse rods: above and outside the window, on the window or molding, and inside the window frame. The optimal location depends on the type of drapery being hung.
Leveling Considerations
Leveling brackets is a critical step in the installation process. Approaches to leveling include measuring from the floor, measuring from the ceiling, or using the window frame as a baseline. In older homes where windows may not be perfectly level or square, slight adjustments may be necessary to ensure the rod appears visually pleasing. It is important to note that if hanging traverse drapes or drapes intended to reach the floor, brackets must be level with the floor to prevent dragging.
Hardware Components
Most drapery hardware installations require three components: two brackets and a center support. However, smaller rods may not necessitate a center support.
Specific Rod Systems
Documentation references several Kirsch rod systems, including:
- Cord Traverse Rods: Utilizing the Kirsch 94001 heavy-duty cord draw system.
- 9600 Hand Draw Sets
- 94003 Hand Draw and Baton Draw Sets
- 94004 Hand Draw and Baton Draw Sets
Accessing Installation Resources
Kirsch provides a comprehensive PDF booklet containing installation instructions for various drapery hardware, traverse rods, valance rods, and specialty rods. This booklet can be downloaded and saved for future reference. Additional information can be obtained by contacting a Kirsch Window Coverings designer.
Conclusion
Kirsch drapery hardware installation involves selecting the appropriate brackets and mounting location, ensuring proper leveling, and utilizing the necessary hardware components. The availability of detailed installation instructions and support resources facilitates a successful installation process. The specific steps will vary depending on the chosen rod system and mounting configuration.