The Kinetico K5 is a drinking water station designed for residential use. Available documentation details installation procedures, physical dimensions, weight, and component connections. Multiple manuals and guides are available for the K5, covering owner’s manuals, installation instructions, troubleshooting, and more. The system utilizes a variety of filters and connections, including 3/8” tube connections for inlet, permeate, and drain lines.
Installation Procedures
Installation of the Kinetico K5 requires connection to a cold water supply via a 3/8” water supply pipe and an isolation valve. The documentation specifies that installation should adhere to local water under sink bylaws and plumbing regulations. The K5 utilizes color-coded connections for installation: blue to blue, green to green, and yellow to yellow.
For systems incorporating an Air Charge Tank, a specific installation sequence is outlined. This involves turning a gray component clockwise until it stops, with a caution against over-tightening. The documentation references a QuickFlo tank installation, with instructions to skip to step 9 for Air Charge Tank installation.
System Dimensions and Weight
The Kinetico K5 has the following dimensions: 5.9 inches (Width) x 15.5 inches (Depth) x 19 inches (Height). The operating weight of the unit is 15 pounds, while the shipping weight is 8 pounds. These specifications are crucial for determining appropriate installation locations and ensuring structural support.
Component Connections
The Kinetico K5 utilizes several connection types:
- Inlet: 3/8” Tube
- Permeate: 3/8” Tube
- Drain Connection: 3/8” Tube
The system also incorporates internal rinse functionality and utilizes an Everclean rinse system. Auxiliary connections are available for components such as Chloramine Guard and Mineral Plus.
Filter Specifications
The Kinetico K5 incorporates a postfilter consisting of a single Activated Carbon Block. The permeate flush capacity is 200 mL and is directed to the permeate reservoir. The system employs a single array configuration and utilizes a hydraulic controller for system shutoff. System shutdown occurs after 500 gallons, as measured by the permeate meter.
Available Documentation
A variety of documentation is available for the Kinetico K5, including:
- Owner’s Manual
- Installation Instructions
- Troubleshooting Manual
- Manuals of varying page lengths (7, 15, 22, 24, 40, and 60 pages are referenced)
These resources provide comprehensive information for users and technicians regarding operation, maintenance, and repair.
Additional Kinetico Products
The provided documentation also references several other Kinetico products, including:
- Powerline Pro Softener
- Powerline Filters
- Powerline Pro Filter
- Powerline Pro Air Injection Filter
- Sulfur Guard
- Pulsatron Solution Feed System
These products suggest Kinetico offers a range of water treatment solutions beyond the K5 drinking water station.
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.