Kegco produces several models of kegerators, including full-size and built-in units. These appliances are designed to dispense draft beer from kegs and require specific installation and operational procedures. This article details installation instructions, temperature settings, maintenance procedures, and warranty information based on available documentation.
Installation Instructions
Proper installation is crucial for optimal performance. The documentation details steps for assembling the kegerator and preparing it for use. Initial steps involve installing caster wheels to the unit. This is accomplished by tipping the empty kegerator on its side and securing the casters to the cabinet with screws, utilizing washers for the front casters. Once the casters are installed, the unit should be carefully set upright.
Another step in the installation process involves removing a plug located at the top of the cabinet. This plug can be removed by hand or with a flathead screwdriver. This creates an opening for the draft tower. The draft tower itself is then installed by feeding the beer line hose and hex nut through the newly created hole.
For the VSK-15 model, handle installation requires removing a portion of the rubber gasket from the back of the mounting holes, inserting screws through the holes, and connecting them to the handle.
Temperature Control and Operation
Kegco kegerators are designed to maintain specific dispensing temperatures for beer. The VSK-15 model features a temperature range of 32 to 75 degrees Fahrenheit, adjustable via UP and DOWN buttons. The initial LED readout displays the factory-set temperature upon first use. The MDK-199 model has an operating temperature range of 34°F - 45°F, and should be placed in an environment with an ambient temperature between 65-80 degrees Fahrenheit. The K309SS-2HB model does not have specific temperature settings listed in the provided documentation.
The MDK-199 is designed to accommodate most full-size kegs and a dispense system, including a 5 lb CO2 tank. However, kegs with wider bevels in the middle, such as Coors Kegs and Rubber Kegs, may not fit. The VSK-15 can accommodate one 7.75-gallon quarter slim keg. The K309SS-2HB can accommodate up to two 5-gallon commercial or Cornelius home brew kegs.
Maintenance and Troubleshooting
Several potential issues may arise during operation. The documentation notes that popping and crackling noises may originate from the inside walls due to contraction and expansion. These noises are generally normal. Other potential issues include the door not closing properly, which can be caused by an unleveled surface or a dirty gasket. Additionally, shelves being out of position can also contribute to operational issues.
The documentation recommends ensuring the appliance remains secure in an upright position during transportation and protecting the exterior with a blanket or similar covering. Adjustable legs can be raised to avoid damage during movement.
Technical Specifications
The provided documentation lists technical specifications for several models.
MDK-199:
- Dimensions: 33" H x 20" W x 25 1/2" D
- Weight (empty): 90 lbs.
- Voltage / Frequency: 115v / 60 Hz
- Running Amps: 2.3 A
- Operating Temperature: 34°F - 45°F
- Ambient Temperature: 65°F - 80°F
VSK-15:
- Dimensions: 33-1/2" H x 15" W x 23-1/4" D (25" w/ handle)
- Weight: 92.6 lbs.
- Voltage / Frequency: 115v / 60 Hz
- Running Amps: 2.3 A
- Operating Temperature: 32°F - 75°F
- Maximum Ambient Temperature: 90°F
K309SS-2HB:
- Dimensions are not provided in the documentation.
- Weight is not provided in the documentation.
- Voltage / Frequency: 115v / 60 Hz
- Running Amps: 2.3 A
- Operating Temperature is not provided in the documentation.
- Maximum Ambient Temperature is not provided in the documentation.
Warranty Information
Kegco offers a limited one-year warranty for defects in material or workmanship under normal use. This warranty covers parts and labor necessary to correct defects, provided the unit has been installed and operated according to the instructions in the manual. The warranty is valid from the date of original purchase by the owner.
California Proposition 65 Warning
The documentation includes a California Proposition 65 warning, stating that the product may contain a substance known to the State of California to cause cancer, birth defects, or other reproductive harm.
Conclusion
Kegco kegerators offer a convenient way to dispense draft beer. Proper installation, temperature control, and maintenance are essential for optimal performance. The provided documentation outlines these procedures for several models, along with technical specifications and warranty information. Users should consult the specific manual for their model for detailed instructions and safety precautions.