The provided documentation details installation instructions for various Kawneer storefront and entrance systems. These systems include the TRIFAB™ VG 450/451/451T, Trifab™ 451UT (Ultra Thermal), TRIFAB™ 601/601T/601 UT Framing, GLASSvent™, and IR 500/501/501 UT Framing, as well as entrance systems like the 350/500 TUFFLINE™ Entrances and AA™250_425 with TRIFAB™ framing. Installation guides are available for specific components such as shear blocks, screw splines, and door frames. The documentation also references instructions for older Husky closers and Norton 1600 series closers.
Storefront Systems: Installation Instructions
Kawneer provides installation instructions categorized by system type. For the TRIFAB VG 450/451/451T systems, instructions are available for stick assembly, shear block assembly, and screw spline assembly, as well as Type B (punched opening) assemblies and SSG & weatherseal stick assemblies. A specific installation and take-off guide is available for the TRIFAB™ 451/451T Impact Resistant systems.
The Trifab™ 451UT (Ultra Thermal) system has its own dedicated installation instructions and take-off guide. Similarly, the TRIFAB™ 601/601T/601 UT Framing system is supported by a specific installation guide. GLASSvent™ systems also have dedicated installation instructions specifically for storefront framing.
Curtain Wall Systems: Installation Details
Installation instructions are provided for Kawneer’s curtain wall systems, including the 1600 Wall System 1 & System 2. For System 1, instructions cover standard and stock length configurations, corner construction (standard and stock length), door framing (transom adapter and transom bar), and missile impact resistance (stock length and large missile impact). System 2 also has corresponding instructions for standard and stock length configurations, corner construction, door framing, and missile impact resistance.
Supplemental installation instructions are available for Clearwall SB/SBI/SBIT systems, covering corner installations, stock-length fabrication, and door adaptor installations. Instructions are also available for the 1600 Wall (classic) and 1600 Wall (SSG) systems. The 7500 Wall system is supported by its own installation instructions.
Entrance Systems: Installation Procedures
Kawneer offers a range of entrance systems with corresponding installation documentation. Instructions are available for 190/350/500 Door & Glazing installations, covering hinged doors with center hung (end load and side load) configurations, offset pivot doors with floor closers and overhead closers.
Specialty entrances, such as the 350/500 TUFFLINE™ Entrances, have dedicated installation guides. Thermal entrances utilizing AA™250_425 framing with TRIFAB™ 451T or 601/601T framing are also covered. Additionally, instructions are provided for INSULCLAD™ 260/360/560 DOORS with TRIFAB™ 451T center framing.
Component-Specific Installation Guides
Beyond complete system instructions, Kawneer provides guides for specific components. These include retrofit instructions for pre-1998 HUSKY closers, installation instructions for KAWNEER drop plates for NORTON 1600 series closers, and instructions for JAMB FAB to receive factory fabricated C.O.C. header t-bar and transom bar. Instructions are also available for TRIFAB™ 400, VG450_451 systems for butt hung, center hung, and offset pivot doors.
Paneline Hardware Installation
Installation and service instructions are available for Paneline EL exit devices. A wiring diagram is provided for a 1-pair, 1-active configuration of the Paneline EL exit device. Service instructions are also available for the Paneline Exit Device.
Important Considerations and System Verification
The documentation emphasizes the importance of confirming that the correct system instructions are being used. This is particularly crucial given the variety of systems and components offered by Kawneer. The provided materials do not detail specific installation techniques or safety precautions beyond the availability of the instructions themselves.
Additional Resources and Support
A Kawneer distributor, as described in one source, offers support throughout the architectural systems project, including assistance with take-off, estimating, project management, and installation. Product manuals are available from the distributor, and custom quotes can be requested.
Conclusion
The provided documentation outlines a comprehensive range of installation instructions for Kawneer storefront, curtain wall, and entrance systems. These instructions are categorized by system type and component, ensuring users have access to the appropriate guidance for their specific project. The availability of dedicated guides for impact-resistant systems, thermal entrances, and specific hardware components highlights Kawneer’s commitment to providing detailed support for its products. Users are advised to verify they are using the correct instructions for their specific system.