The provided documentation details installation instructions for JELD-WEN vinyl patio doors with integral nailing fins. These instructions emphasize weather-tight sealing and water drainage, addressing concerns related to increasing air tightness in modern buildings. The documentation also outlines procedures for reversing the handing of specific door models, allowing for operational flexibility. Installation times are estimated based on installer experience level. The documentation differentiates between step-down landing and continuous slab landing conditions, noting variations in installation methods.
Understanding Installation Considerations
JELD-WEN installation instructions are designed for most existing applications; however, the documentation explicitly states that alterations made to accommodate existing conditions are the installer’s responsibility and risk. This highlights the importance of assessing the rough opening and adapting the procedure as needed. The instructions focus on achieving a weather-tight seal, acknowledging that newer construction methods can create negative air pressure within structures, potentially drawing water through small openings. A sill pan is utilized to capture and drain incidental storm water from under the patio door.
Weep Hole Functionality and Glossary
The documentation includes a glossary of terms, defining a “weep hole” as the visible exit or entry point of a water drainage system used to drain water from the door frame. This emphasizes the importance of maintaining clear weep holes for proper water management. Proper installation is crucial for the longevity and performance of the patio door, and the documentation provides contact information for customer support via email ([email protected]) and phone ((800)-JELD-WEN/(800)-535-3936).
Landing Type Specifics
The installation methods vary depending on whether the patio door is installed with a step-down landing or a continuous slab landing. The documentation covers both conditions, indicating that installers should identify the appropriate landing type before commencing installation. The documentation provides a visual representation of both landing types, aiding in correct procedure selection.
Reversing Patio Door Handing
Certain JELD-WEN Builders sliding patio doors are reversible, allowing them to be opened from either the left or the right. This feature is limited to pre-installed 6'8" and 6'10" models without blinds between the glass, and those equipped with weep holes on both the top and bottom. The documentation stresses that the door should not be installed until after the reversing instructions (detailed in document SVC001, available at www.jeld-wen.com) have been completed and the fixed panel is positioned on the desired side. This is a critical step to ensure proper operation after reversing the handing.
Estimated Installation Times
The documentation provides estimated installation times based on installer experience level:
- First Time: 1½ hours
- Experienced: ¾ hour
- Professional: ½ hour
These estimates are intended as a guideline and may vary depending on the complexity of the installation and any necessary modifications to accommodate existing conditions.
Installation Instructions Overview
The provided documentation references attached installation instructions (JII006) for vinyl patio doors with integral nailing fins. While the specific steps are not detailed within the provided text, the documentation emphasizes the importance of reading these instructions thoroughly before beginning the installation process. The documentation also references wood window and patio door finishing instructions found on the Care & Maintenance page of the JELD-WEN website.
Product Range Coverage
The documentation indicates that JELD-WEN provides installation and finishing instructions for a range of products, including:
- Vinyl Windows
- Interior and Exterior Doors
- Wood and Clad-Wood Windows
- Wood and Clad-Wood Patio Doors
Users are advised to search for their specific model on the JELD-WEN website or contact customer support if they are unsure of their model number.
Importance of Proper Installation and Finishing
The documentation highlights the vital importance of correctly installing and finishing JELD-WEN products. This underscores the manufacturer’s commitment to product performance and longevity, and emphasizes the role of proper installation in achieving optimal results. The documentation directs users to the Care & Maintenance page for detailed finishing instructions.
Conclusion
The provided documentation focuses on the proper installation and handing procedures for JELD-WEN vinyl sliding patio doors. Key takeaways include the importance of weather-tight sealing, understanding landing type variations, and following specific instructions when reversing door handing. The documentation stresses the installer’s responsibility for adapting to existing conditions and provides resources for obtaining further information and support. Proper installation and finishing are emphasized as critical factors in ensuring the long-term performance and durability of the product.