The JELD-WEN JII102 Wood Pocket Door Frame is designed for use in new construction and existing applications. Installation requires adherence to safety guidelines and may necessitate modifications based on existing conditions, undertaken at the installer’s risk. The documentation provides installation instructions, a list of included parts, and a list of needed tools and materials. Estimated installation times vary based on installer experience, ranging from one hour for professionals to three hours for first-time installers.
Safety and Handling Procedures
Prior to installation, it is essential to read and fully understand all manufacturer’s instructions. The documentation emphasizes that installation should not be undertaken alone; a minimum of two people is required. Safe lifting techniques must be employed throughout the process. Protective gear, including safety glasses, gloves, and ear protection, is recommended.
Specific handling instructions for the door frames are provided to prevent damage. The frames should be carried in a vertical position and not dragged across the floor. Stress should be avoided on joints, corners, or frames. Storage requires a dry, well-ventilated area, with the frames leaning vertically to allow for air circulation; horizontal stacking is not recommended. Protection from direct sunlight during storage is also advised. In the event of injury during installation, immediate medical attention should be sought.
Included Parts and Components
The JII102 Wood Pocket Door Frame package includes the following components:
- Face jamb (A)
- Top track (B)
- Pre-assembled pocket frame (C)
- Wheel hanger (D)
- Adjusting bolt (E)
- Lock nut (F)
- Hanger bracket (G)
- (4) 1 1/2" pan head screws (H)
- Nylon guide (I)
- Adjusting wrench (J)
Required Tools and Materials
Successful installation of the JII102 Wood Pocket Door Frame requires specific tools and additional materials. The necessary tools include:
- Tape measure
- Utility knife
- Level (a 4' minimum level is recommended)
- Hammer
- Screw gun
- 3 pound maul
In addition to these tools, the following materials are required, but are not included with the frame:
- #10 x 2" screws
- Finishing supplies
Installation Time Estimates
The documentation provides estimated installation times based on the installer’s level of experience. These estimates are as follows:
- First-time installer: 3 hours
- Experienced installer: 2 hours
- Professional installer: 1 hour
It is important to note that these are estimates and actual installation time may vary depending on existing conditions and any necessary modifications.
Important Installation Notes
The provided documentation highlights that the installation instructions are designed to work in most existing applications. However, existing conditions may necessitate changes to the instructions. Any such changes are made at the installer’s risk. For installations that deviate from the provided instructions, consultation with a building professional is recommended. The documentation also states that by installing the product, the installer acknowledges the terms and conditions of the limited warranty. A copy of these instructions should be provided to the building owner.
Conclusion
The JELD-WEN JII102 Wood Pocket Door Frame requires careful installation following the provided guidelines. Prioritizing safety, utilizing the correct tools and materials, and acknowledging the potential need for modifications based on existing conditions are crucial for a successful installation. Understanding the estimated installation times based on experience level can aid in project planning.
Sources
The provided source material is insufficient to produce a 2000-word article. Below is a factual summary based on available data.