JADO manufactures luxury faucets and accessories, offering both mechanical and finish warranties on its products. Installation procedures require careful attention to detail, including leak testing and proper flushing of water lines. Maintaining the finish requires specific cleaning procedures to avoid damage and preserve the warranty. This article details installation instructions, maintenance guidelines, warranty information, and troubleshooting steps based on available documentation.
Installation Procedures
Installation instructions vary slightly depending on the specific JADO faucet model. However, several steps are common across different product lines, including the Glance 831/003 series and the Victorian 850/800 series. Prior to beginning installation, it is crucial to carefully read all provided instructions.
For widespread lavatory faucets, the initial step involves removing the aerator to test for leaks after connecting water supplies. With handles in the “off” position, water supplies should be turned on and all connections inspected. Both handles should then be operated to thoroughly flush the water lines.
For faucets equipped with a hand spray, such as the Victorian 850/860 series, the hand spray must be disconnected from the hose and the hose end directed into the sink to flush water lines. After flushing, the hand spray is reconnected and the connections are checked for leaks while operating the handle. The functionality of the hand spray, including the spray lever, should also be verified.
Lift rod adjustment is necessary to ensure the drain stopper creates a proper seal. This is achieved by repositioning the lift rod and tightening the set screw. The drain connections and P-trap should also be inspected for leaks and tightened as needed. Finally, the aerator is replaced.
Cleaning and Maintenance
JADO faucets are constructed from solid brass and designed for long-term durability. Proper cleaning and maintenance are essential to preserve their appearance and functionality. It is recommended to wipe the faucet clean and dry with a soft, damp cloth after each use.
Abrasive cleaners or combination cleaner/polishes should never be used on JADO products. These substances can damage the finish and void the warranty. For stubborn blemishes, Windex window cleaner with a soft cloth is recommended, but not for everyday use. It is considered normal for signs of usage to appear over time.
Warranty Information
JADO offers both a lifetime mechanical warranty and a limited finish warranty on its products. The finish warranty for polished brass and custom finishes is limited to one year from the date of purchase, covering defects in materials and workmanship. This warranty excludes patina products due to the natural changes in their finish. The mechanical warranty covers parts and is intended to protect against failures related to defects in materials and workmanship, but does not cover installation issues.
The warranties are limited to the first residential owner and are contingent upon correct installation and use in a residential environment. JADO will not assume liability for damage resulting from abuse, mishandling, incorrect installation, improper maintenance, or normal wear and tear. In the event of a defect, the product must be returned to the original dealer with proof of purchase. JADO’s obligation is limited to the repair or exchange of the defective product after appropriate examination.
Proposition 65 Warning
California Proposition #65 requires manufacturers to provide a warning if their products contain materials known to the State of California to cause cancer or reproductive harm. JADO products, like most brass faucets, contain limited amounts of lead, which is listed by the state. While preliminary industry tests suggest that users of brass faucets face no significant danger, JADO provides this notice in compliance with Proposition #65.
Water Conservation Standards
JADO products are designed to meet industry requirements for water conservation, adhering to the ASTM / ANSI A112.18.1M-1994 plumbing code. Lavatory, bidet, wet bar, and kitchen faucet sets have a maximum flow rate of 2.2 gallons per minute (GPM). Shower heads, hand showers, and body sprays have a maximum flow rate of 2.5 GPM.
Troubleshooting
The provided documentation includes limited troubleshooting guidance. For low water flow, the aerator should be removed and cleaned. If the pull-out spray hose is not functioning correctly, it should be checked for obstructions with plumbing connections or fittings under the faucet.
Available Models and Documentation
ManualsLib lists a variety of JADO manuals, categorized by product type. Available documentation includes installation instructions for numerous models, including:
- Oriental 893, 933
- Glance 831/003
- New Haven 826/003, New Haven 826/103
- Classic 853/130 Series
- Classic 853/131 Series
- Classic 853/140 Series
- Classic 853/141 Series
- Classic 853/495 Series
- Classic 853/496 Series
- Classic 855/887 Series
- Classic 855/986 Series
- Classic 855/987 Series
- Classic 855/993 Series
- 818 Series
- 818/535 Series
- 818/536 Series
- 853/450 Series
- 853/451 Series
- 853/452 Series
- 853/453 Series
- 853/454 Series
- 853/535 Series
- 875/614/191
Documentation types include installation instructions and user manuals.
Conclusion
JADO faucets are designed for lasting performance and aesthetic appeal. Proper installation, regular maintenance using appropriate cleaning methods, and adherence to warranty guidelines are crucial for maximizing the lifespan and enjoyment of these products. Understanding the available documentation and troubleshooting steps can help resolve common issues and ensure continued satisfaction.