The Jackson Racing supercharger systems are designed for installation on specific vehicle models – the 1997-2001 Honda Prelude and the 1990-1993 Mazda Miata. Installation requires a degree of mechanical competence and the use of specific tools. Proper installation and warranty validation necessitate careful attention to detail, particularly regarding the recording of the supercharger’s serial number. The documentation stresses the importance of using premium fuel and thoroughly checking fuel system connections for leaks post-installation.
Supercharger System Compatibility
Jackson Racing offers supercharger systems for two distinct vehicle lines, as detailed in the provided documentation. These are:
- 1997 to 2001 Honda Prelude models.
- 1990 to 1993 Mazda Miata models.
The documentation specifically lists part numbers associated with the Miata supercharger kits: 999-156, 999-157, 999-158, and 999-159. No specific part numbers are provided for the Prelude application.
Required Tools for Installation
Successful installation of the Jackson Racing supercharger requires a specific set of tools, most of which are commonly available at hardware or auto parts stores. The documentation lists the following:
- 17mm sockets
- 14mm sockets
- 13mm sockets
- 12mm sockets
- 10mm sockets
- 8mm sockets
- Deep sockets (14mm or 9/16", 10mm)
- Phillips screwdrivers
- Standard screwdrivers
- Multi-purpose pliers
- 10mm open-end wrench
- 12mm open-end wrench
- 17mm open-end wrench
- Timing light
- A shop manual is recommended as a supplemental resource.
Installation Procedures – Miata Specifics
The provided documentation includes some specific installation steps for the Mazda Miata supercharger system. These include:
- Alternator Bracket Modification: The installation requires the use of a new bracket for the alternator. This bracket must be securely seated using a hammer and then fastened with the original alternator bolts.
- Power Steering Line Adjustment: The power steering line on the driver’s side of the vehicle, near the fender, requires adjustment. The line should be carefully pushed towards the fender using a long-handled hammer to provide clearance for the new belts that will drive the supercharger.
- Pulley Bracket Installation: A new pulley bracket must be installed to the back of the engine block.
Warranty Validation
Validating the 2-year, 100,000-mile warranty on the Jackson Racing supercharger is contingent upon completing and submitting the Moss Motors / Jackson Racing warranty card included with the kit. A critical step in this process is accurately recording the serial number located on a small white ‘bar code’ label affixed to the supercharger body. The documentation emphasizes the importance of recording this number before installation, as it may become inaccessible once the supercharger is mounted.
Safety Precautions and Warnings
The documentation highlights several important safety precautions and warnings:
- Competent Mechanic Required: The supercharger systems are designed for installation by individuals with good mechanical skills and access to the necessary tools. Individuals lacking these qualifications are advised not to attempt the installation.
- Fuel System Leak Check: After installation, it is imperative to thoroughly check and recheck all fuel system connections for potential leaks before operating the vehicle.
- Fuel Grade: The use of 91-octane gasoline (or higher) is required for optimal performance and to prevent engine damage.
- Read Instructions Thoroughly: Installers are advised to read the instructions completely, step-by-step, and to read ahead to anticipate notes and warnings.
Contact Information
The documentation provides contact information for Jackson Racing:
- Phone: 1-888-888-4079
- FAX: 805-692-2523
- Website: www.supercharger.com
- Address: 440 Rutherford St. P.O. Box 847 Goleta, CA 93117
Conclusion
The Jackson Racing supercharger systems for the Honda Prelude and Mazda Miata require careful installation by a mechanically proficient individual. Proper warranty validation depends on accurately recording the supercharger’s serial number before installation. Post-installation safety checks, particularly regarding fuel system leaks, are crucial. The use of premium fuel is also a requirement for optimal performance and engine protection. The provided documentation serves as a foundational guide, but a shop manual is recommended for supplemental information.