The iOttie Easy One Touch mount series provides smartphone mounting solutions for vehicles. These mounts utilize a combination of suction cup technology, adhesive dashboard pads, and adjustable arms to securely hold devices. Installation options include windshield and dashboard mounting. The mounts feature an “Easy One Touch” mechanism for quick device insertion and removal, and are compatible with a range of smartphone sizes. Customer support and a one-year limited warranty are available through iOttie.
Installation Options
The iOttie Easy One Touch mounts offer multiple installation options, primarily focusing on windshield and dashboard placement. The choice between these options depends on user preference and vehicle dashboard characteristics.
For windshield installation, the documentation indicates that a dashboard pad is not necessary. The mount is affixed directly to the windshield using a sticky suction cup. Prior to installation, the target surface should be cleaned of any dust or debris.
Dashboard installation may benefit from the use of a dashboard pad, which is mounted using a semi-permanent adhesive tape. The documentation specifically recommends using the dashboard pad when mounting to a dashboard surface, though it is not required for windshield installation. The pad provides a more stable base on textured dashboard surfaces.
Utilizing the Suction Cup Mechanism
A key component of the iOttie Easy One Touch mount is the sticky suction cup. The documentation emphasizes the importance of a clean surface for optimal adhesion. The suction cup is engaged by firmly pressing it against the chosen location and activating a lever to create a vacuum seal.
To remove the mount without leaving residue or causing damage, the lever should be disengaged, and steady pressure applied while pulling the tab on the suction cup. Any remaining residue can be removed with a gentle adhesive remover or isopropyl alcohol applied to a soft cloth. Sharp objects or excessive force should be avoided during removal.
Adjusting the Mount for Device Compatibility
The iOttie Easy One Touch mounts are designed to accommodate a variety of smartphone sizes. Adjustment is achieved through several mechanisms. The locking side arms can be pressed inward to create space for the device. These arms should be adjusted to fit the width of the phone, ensuring they remain parallel. Once the phone is positioned, the arms are gently pressed inward to securely hold it.
Additionally, the cradle knob allows for 360-degree rotation, enabling users to switch between portrait and landscape modes. The bottom support arm can also be adjusted to provide additional stability and prevent the phone from sliding.
The Easy One Touch Mechanism
The “Easy One Touch” mechanism simplifies the process of mounting and retrieving smartphones. This mechanism involves locking side arms that are pressed inward to accommodate the device. Once the phone is positioned, the arms automatically lock into place. To release the phone, the same arms are pressed again, allowing for quick removal.
Troubleshooting Common Issues
The documentation addresses several common issues users may encounter. If a phone slides out of the mount, it is recommended to ensure the bottom support arm is correctly positioned against the bottom of the phone and that the side arms are securely gripping the sides. The inclusion of the adhesive dashboard pad can also provide additional stability.
Charging Compatibility
The iOttie Easy One Touch mounts are designed to allow for simultaneous charging of the mounted device. A bottom cut-out provides easy access to the phone’s charging port. Users can connect their charging cable while the phone is mounted, ensuring sufficient slack in the cable to accommodate positioning adjustments.
Customer Support and Warranty Information
iOttie provides customer support via telephone (201-580-2688) and email ([email protected]). The company also maintains a website (www.iottie.com) with additional resources. A one-year limited warranty is included with the product, guaranteeing a hassle-free replacement should any issues arise within the warranty period.
Additional Features and Models
The documentation references the iOttie Easy One Touch 5 model, highlighting features such as adjustable width and height. The documentation also mentions an Alexa Built-in Dashboard & Windshield Mount, though details regarding its specific functionality are limited to language options (English, French, and Spanish). The Easy One Touch Connect is also referenced, with mentions of installation, software, and skills, but without further elaboration.
Conclusion
The iOttie Easy One Touch mount series offers a versatile solution for securely mounting smartphones in vehicles. Installation is straightforward, with options for both windshield and dashboard mounting. The “Easy One Touch” mechanism simplifies device insertion and removal, while adjustable arms and a rotating cradle ensure compatibility with a wide range of smartphones. iOttie provides customer support and a one-year warranty for added peace of mind. The mounts also accommodate simultaneous charging, enhancing their usability.