The Intermatic AG3000 is a surge protection device designed to safeguard electronic equipment from power surges and spikes. It is intended for both residential and commercial applications and is available as a Type 1 or Type 2 surge protector. The device features a limited warranty covering both the product itself and connected equipment, up to a specified amount, contingent upon proper installation and maintenance. Installation requires a qualified, licensed technician or electrician and adherence to national and local electrical codes.
Device Overview and Applications
The Intermatic AG3000 is designed to protect sensitive electronics from voltage fluctuations. The documentation specifies its suitability for circuits delivering no more than 20,000 rms symmetrical amperes. It is constructed with robust materials and advanced technology to provide reliable surge protection. The device is applicable for both indoor and outdoor installations, though outdoor installations require mounting the threaded nipple horizontally within a suitable enclosure.
Specific applications mentioned include protection for HVAC systems, pumps, and single-phase motors. A Type 1 installation typically connects between the secondary of the service transformer and the line side of the service panel. A Type 2 installation is intended for connections at individual pieces of equipment.
Installation Instructions
Proper installation is critical for the effective operation and warranty validity of the AG3000. The following points are derived from the provided installation instructions:
- Safety First: Disconnect power at the circuit breaker or disconnect switch before beginning installation or servicing.
- Qualified Personnel: Installation and service must be performed by a qualified, licensed technician or electrician.
- Code Compliance: All wiring and installation must adhere to national and local electrical codes, and/or the Canadian Electrical Code.
- Circuit Capacity: The device is suitable for use on a circuit capable of delivering not more than 20,000 rms symmetrical amperes.
- No Serviceable Parts: The unit contains no user-serviceable parts. Attempting to open or modify the device will void the warranty.
Type 1 Installation: A typical Type 1 installation connects the device between the secondary of the service transformer and the line side of the service panel.
Type 2 Installation: A typical Type 2 installation involves connecting the device to a 120 VAC two-wire single-phase circuit with a separate ground. In this configuration, both black wires connect to the “Line” terminal. This type of installation is often used for individual pieces of equipment. An example provided shows a 2-pole, 20A circuit breaker.
Operational Status and Monitoring
The AG3000 incorporates a green LED indicator light to communicate its operational status. A lit green light signifies that the device is functioning normally and providing surge protection. If the green indicator light is off, the AG3000 requires replacement. Regular monitoring of the indicator light is the owner’s responsibility to ensure continued protection of connected equipment.
Limited Warranty Details
Intermatic provides a limited warranty for the AG3000, covering both the product itself and connected equipment. The warranty terms are as follows:
Three-Year Limited Product Warranty: The AG3000 is warranted to be free from defects in material and workmanship for a period of three years from the date of purchase or 39 months from the date of manufacture. If a defect is discovered, Intermatic will replace the defective product at its expense.
$7,500.00 Connected Equipment Warranty: If connected equipment is damaged while using the AG3000, a claim process is available. This process requires the following steps:
- File an insurance claim with the homeowner’s insurance policy.
- Return the AG3000 to Intermatic for evaluation and testing at the following address: Intermatic Warranty Coordinator, 7777 Winn Road, Spring Grove, IL 60081.
- Intermatic will investigate whether a defect in the AG3000’s material or workmanship caused the damage. If a defect is confirmed, Intermatic will cover costs exceeding the homeowner’s insurance coverage, up to a maximum of $7,500.00.
Warranty Requirements: The product must be installed in accordance with the installation instructions and all applicable electrical codes. The device must not be opened, modified, or subjected to extreme conditions. All products must be used according to the provided instructions.
Important Notices and Disclaimers
The documentation includes several important notices and disclaimers:
- The AG3000 does not protect against lightning strikes.
- The product must be installed in the appropriate application, adhering to all installation instructions.
- All building wiring and connections must comply with applicable national, state, and local electrical codes.
- The unit should not be opened, modified, exposed to extreme temperatures, submerged, or subjected to abnormal use.
Conclusion
The Intermatic AG3000 surge protective device offers a means of safeguarding electronic equipment from damaging power surges. Proper installation by a qualified electrician, adherence to electrical codes, and regular monitoring of the indicator light are essential for optimal performance and warranty coverage. The provided warranty offers protection for both the device itself and connected equipment, subject to specific terms and conditions. Users should carefully review the installation instructions and warranty details to ensure proper operation and maximize the benefits of this surge protection solution.