Illusions Vinyl Fence offers a range of fencing solutions for residential, commercial, and agricultural applications. Installation instructions and product specifications are available from the manufacturer, covering aspects from post selection to gate hardware. The company provides documentation for standard fence installations, wind-resistant configurations, pergola kits, and gate mechanisms. This article details the available information regarding Illusions Vinyl Fence products, focusing on installation procedures, technical specifications, and warranty details as outlined in the provided documentation.
Fence Installation Overview
Illusions Vinyl Fence provides installation instructions intended for both licensed installers and do-it-yourself consumers. The documentation emphasizes the importance of adhering to local zoning and building codes during construction. Users are advised to prioritize safety by wearing appropriate safety equipment throughout the installation process. The diagrams and instructions provided are for illustrative purposes and should not supersede the guidance of a qualified professional. The manufacturer disclaims liability for damages resulting from improper installation or use.
Installation planning involves selecting the appropriate line, end, and corner posts. The documentation references metal U-Channel for correct railing placement, though specific details regarding its use are not provided. Post hole digging and sizing are critical steps, but the documentation does not specify dimensions. The process includes setting and installing posts and panels, with attention to material specifications and quality assurance.
Gate Installation Procedures
Specific instructions are available for installing Illusions Vinyl Fence gates. For walk gates, a drop rod is recommended. Double drive gates require a drop rod on each leaf of the gate. The documentation specifies the use of Heavy Duty Gate Posts, either 5" x 5" (VH55_ _ ) or Majestic Entryway Gate Posts 8" x 8" (V88 _ _).
The gate installation process involves the following steps:
- Lay the gate on a flat surface.
- Attach hinges to the gate frame 6" from both the top and bottom edges, using the provided screws. It is crucial to verify the desired swing direction and latch position before attaching the hinges.
- Place the gate against the hinge post, adjust the height, and secure the hinges to the post with the provided screws.
- Adjust the hinges as needed to achieve a 1" spacing between the latch post and the gate, ensuring the gate is square.
- Attach the latch to the gate, verifying its position to accommodate the gate’s swing.
- Install a gate stop at the bottom of the gate to prevent damage from slamming.
- Apply a post cap to each post using PVC glue or an exterior adhesive.
The documentation notes that gate frames should be allowed to cure according to the manufacturer’s recommendations before hanging.
Wind Kit Installation
Illusions Vinyl Fence offers a 75MPH Wind Kit for installations in areas prone to high winds, particularly those requiring Miami-Dade County approval. Detailed instructions are available for installing this kit. The documentation also includes a Notice of Acceptance (NOA) and specification sheets, which may be required for certain installations. The documentation does not provide specifics on the kit’s components or installation process beyond noting its availability.
Product Specifications and Warranty
Illusions Vinyl Fence products are covered by a comprehensive limited lifetime warranty for the Classic Illusions Fence line. Grand Illusions Color Spectrum and Grand Illusions Vinyl WoodBond products are protected by a twenty-year pro-rated warranty. Detailed warranty information is available on the Illusions fence website at www.illusionsfence.com.
The company emphasizes the quality of its materials, referencing ASTM F964-13 as a key testing specification for vinyl fence quality. This specification establishes a recognized standard for exterior vinyl profiles used in agricultural, commercial, and residential fencing and railing. Illusions Vinyl Fence sections and the EverStrong Profiles used to fabricate them are designed to meet this standard.
CAD and PDF Files
Product specifications and CAD files for Illusions Vinyl and PVC Fence are available for download at www.CADDetails.com. This website is intended for architects, landscape architects, and companies needing to specify products. Over 100 styles of Illusions Vinyl Fence and Illusions Vinyl Railing System CAD and PDF files are available. Access requires a free membership to CADDetails.com.
Conclusion
Illusions Vinyl Fence provides a range of fencing solutions accompanied by detailed installation instructions and product specifications. The documentation covers standard fence installation, gate hardware, wind-resistant configurations, and pergola kits. The company offers warranties on its products and emphasizes adherence to industry standards like ASTM F964-13. Resources such as CAD files are available for professional users. The provided documentation serves as a guide for both professional installers and DIY consumers, though it consistently advises adherence to local building codes and prioritizes safety.