The Icon Vehicle Dynamics FSD Pro Winch Bumper, specifically model 66200 for 2017 and newer vehicles, requires careful installation to avoid damage to the vehicle’s frame, suspension, or tires. Icon Vehicle Dynamics recommends professional installation and states that product failure resulting from improper installation will not be covered under warranty. This article details the installation instructions, included components, required tools, and important notices based on the provided documentation.
Preparation and Safety Precautions
Prior to beginning the installation process, several preparatory steps must be taken. The vehicle should be positioned on a flat, level surface. The transmission must be in PARK (or first gear for manual transmissions), the tires should be securely chocked, and the emergency brake engaged. Safety glasses must be worn throughout the entire installation procedure. Disconnecting the negative battery terminal is also a required initial step. The documentation emphasizes reading all instructions thoroughly from start to finish before commencing any work. Upon arrival, all packages should be inspected for completeness and shipping damage, with immediate contact to Icon Vehicle Dynamics (951.689.ICON) for any discrepancies or assistance.
Component Inventory
The 66200 FSD Pro Winch Bumper package includes the following components:
- (1) 17-UP FSD Front Bumper
- (1) 17-UP FSD Front Bumper Winch Tray
- (1) 17-UP FSD Driver Side Facia Mount 1
- (1) 17-UP FSD Driver Side Facia Mount 2
- (1) 17-UP FSD Passenger Side Facia Mount 1
- (1) 17-UP FSD Mesh Driver Side
- (1) 17-UP FSD Mesh Passenger Side
- (2) 17-UP FSD Mesh Top
- (1) Winch Bumper License Plate Bracket
Hardware Included
The installation hardware provided with the bumper consists of:
- (8) 1/2-13 NYLOCK Nut GR8 YZINC
- (24) 1/2" SAE Flat Washer GR8 YZINC
- (2) 1/2-13 X 1.00 HHCS GR8 YZINC
- (8) 1/2-13 X 1.50 HHCS GR8 YZINC
- (8) 1/2-13 X 2.00 HHCS GR8 YZINC
- (2) 3/8-16 X 1.00 BHCS 18-8 RAW
- (2) 3/8-16 NYLOCK Nut GR8 CZINC
- (28) M6-1.00 X 20MM BHCS SS
- (8) M6-1.00 X 20MM Square Neck Carriage Bolt SS
- (8) M6-1.00 Flange Nut SS
- (2) Bumper License Plate Retainer
Required Tools
Successful installation of the Icon Vehicle Dynamics FSD Pro Winch Bumper requires the following tools:
- Ratchet/extensions
- Body panel clip removal tool
- 4mm hex key
- 10mm & 15mm socket/wrench
- 7/32" hex key
- 3/4" socket/wrench
- E6 external Torx socket
Installation Notices and Warnings
The documentation repeatedly stresses the importance of proper installation. Failure to follow the instructions correctly may result in severe damage to the vehicle’s frame, suspension, or tires. Icon Vehicle Dynamics explicitly states that improper installation voids the product warranty. The documentation is specifically for the 2017-UP FSD Pro Winch Bumper, document INST66200REVA, updated in February 2022.
Additional Trail Icon Products
Trail Icon offers a range of products for various vehicle types. Available products, as of the provided documentation dated October 30, 2025, March 28, 2025, June 19, 2025, and December 26/27, 2024, include:
- CAN-AM DEFENDER (PART# 102181)
- VTMC/VTMCXL (PART# VTMC | VTMCXL, updated March 28, 2025)
- AGRGM (PART# AGRGM, updated June 19, 2025)
- 212401 (PART# 212401, updated December 26, 2024)
- RCPZ (PART# RCPZ)
- BRXR-1 (PART# BRXR-1, updated December 27, 2024)
- POLARIS RANGER 1500 (PART# VTXD1500)
Conclusion
The Icon Vehicle Dynamics FSD Pro Winch Bumper (model 66200) is a component requiring careful and precise installation. The provided documentation highlights the necessity of adhering to all instructions, utilizing the correct tools, and prioritizing safety precautions. Proper preparation, a complete component inventory, and awareness of potential hazards are crucial for a successful installation and to maintain the product warranty. The documentation also provides a list of other Trail Icon products available for various vehicle types.