HOPPE offers a range of hardware solutions for doors, including the HLS® 9000 multipoint lock system. Installation procedures and available documentation vary depending on the specific application – swing doors versus sliding doors – and handle set type. This article details installation instructions and related information based on available HOPPE documentation. Proper installation ensures optimal performance and longevity of HOPPE products. Replacement parts and products can be obtained through authorized distributors.
Swing Door Hardware Information
HOPPE provides extensive documentation for its HLS® 9000 swing door hardware. Several installation guides are available, catering to different handle set configurations. These include instructions for standard handle sets, sets with Buna, and quick-fit handle sets. Additional resources cover terminology, top extension attachments, and hardware assembly for both active and inactive panels. Specific guides available include:
- HLS® 9000 Swing Door Handle Operation Instructions
- HLS® 9000 Swing Door Standard Handle Set Installation Instructions
- HLS® 9000 Swing Door Standard Handle Set with Buna’s Installation Instructions
- HLS® 9000 Swing Door Quick-Fit Handle Set Installation Instructions
- HLS® 9000 Swing Door Quick-Fit Handle Installation with Buna’s Installation Instructions
- HLS® 9000 Fixed (Dummy) Trim Installation Instructions
- HLS® 9000 Aluminium Fixed (Dummy) Trim Installation Instructions
- HLS® 9000 Multipoint Hardware System Terminology
- HLS® 9000 Multipoint Top Extension Attachment Information
- HLS® 9000 Multipoint Hardware Instructions
- HLS® 9000 Active Panel Shootbolt Hardware Assembly Instructions
- HLS® 9000 Inactive Panel Hardware Assembly Instructions
- HLS® 9000 Stainless Steel Handle Set Installation Instructions
Sliding Door Hardware Installation
Specific instructions are available for the HLS® 9000 Multipoint Sliding Door Handle. The installation process requires a Phillips screwdriver, vise grips, and pliers. A hex wrench for set screws is included in the hardware package.
The installation process for the HLS® 9000 Multipoint Sliding Door Handle involves several steps:
- Handing Determination: The first step is to determine the door’s handing.
- Handle and Backplate Installation: Slide handles into backplates, ensuring the square corners of the handle neck align with the notches in the backplate. Secure the handle by inserting a screw from the back side of the plate into the handle neck and tightening it firmly with the included 6 mm hex wrench.
- Gasket Application & Thumbturn Installation: Press a gasket onto the interior backplate. Insert the thumbturn shaft into the hub on the sliding door lock.
- Backplate Mounting: Push the backplate mounting lugs into the mounting holes.
- Cylinder Tailpiece Installation: Press a gasket onto the exterior backplate. Rotate the cylinder tailpiece away from the door edge. Insert the cylinder tailpiece into the thumbturn shaft slot and push the backplate mounting lugs into the mounting holes.
Door Thickness and Tailpiece Score Marks
The HLS® 9000 Multipoint Sliding Door Handle is designed to accommodate a range of door thicknesses. The correct tailpiece score mark must be used to ensure proper operation. The following table outlines the relationship between door thickness and the appropriate score mark:
| Door Thickness Range | Tailpiece Score Mark |
|---|---|
| 1.38″ – 1.42″ 35 mm – 36 mm | 1 |
| 1.42″ – 1.65″ 36.1 mm – 42 mm | 2 |
| 1.66″ – 1.77″ 42.1 mm – 45 mm | 3 |
Cleaning and Maintenance
HOPPE recommends using water and a soft cloth to clean HOPPE products. Brass cleaner should not be used, as it will remove the protective coating. Proper care will help ensure the longevity of HOPPE products.
Available Documentation
HOPPE provides a variety of documentation to support its products. This documentation is categorized into Cylinder Information, Hinge Information, and Handle Set Information. The documentation includes installation instructions, operation instructions, and terminology guides. The available resources cover both swing door and sliding door applications.
Conclusion
HOPPE’s HLS® 9000 multipoint lock system offers a comprehensive hardware solution for both swing and sliding doors. Installation procedures vary depending on the specific application and handle set type. Detailed installation guides and supporting documentation are available to ensure proper installation and optimal performance. Correct door thickness and tailpiece score mark selection are crucial for the proper functioning of the sliding door handle. Regular cleaning with water and a soft cloth will help maintain the product’s appearance and longevity.