The Hooke Road roof rack system, specifically model BXG.8906-S, is designed for vehicle mounting and off-road use. Installation involves assembling components with specified hardware and securing the rack to the vehicle’s roof. The provided documentation details a step-by-step installation process, component lists, and cautionary notes regarding part variations. The installation process requires approximately two hours and is recommended for two to three people, with completion time potentially varying based on mechanical skill.
Component Overview
The BXG.8906-S roof rack includes several components, identified by part name and size. The documentation lists the following:
- Roof Rack Assembly
- Flat Washer (M8201)
- Button Head Socket Cap Bolts Screws (M8*16)
- Flat Washer (M6161)
- Button Head Socket Cap Bolts Screws (M8*25)
- Flat Washer (M6121)
- Button Head Socket Cap Bolts Screws (M6*10)
- Tee Sliding Slot Nuts (M6)
- Flange Hex Lock Nuts (M8)
- Flange Hex Lock Nuts (M6)
The documentation notes that product parts may differ slightly from the actual product contents without generally affecting installation.
Installation Procedure – Initial Assembly
The installation process begins with assembling the rack on the ground. Step one involves mounting the Rear Fairing and Rear Side Side Rails using Button Head Socket Cap Bolts Screws (M816), Flat Washers (M820*1), and Flange Hex Lock Nuts (M8). Step two involves installing the three Crossbars.
Subsequent steps focus on bracket installation. Mounting brackets are to be distinguished from the back of the rack. Before installing half of the luggage rack onto the vehicle, brackets must be installed into the roof rack using Button Head Socket Cap Bolts Screws (M825), Flat Washers (M820*1), and Flange Hex Lock Nuts (M8).
Vehicle Mounting – First Half
Step five details placing half of the luggage rack into the vehicle and snapping the bracket into the groove. The documentation then describes assembling the rack on the ground again, this time mounting the short crossbar into the Front Fairing. This requires Button Head Socket Cap Bolts Screws (M610), Flat Washers (M612*1), and Tee Sliding Slot Nuts (M6). It is important to ensure the machined slot in the rail of the crossbar faces the front fairing during this step.
Vehicle Mounting – Front Assembly
Steps seven through nine detail the front assembly and mounting process. Front Roof Mount Brackets are assembled with Button Head Socket Cap Bolts Screws (M58) and then installed into the front fairing using Button Head Socket Cap Bolts Screws (M816) and Flat Washers. The cover above the front glass of the original vehicle is removed, and the front fairing is installed into the vehicle using Flange Hex Lock Nuts (M6). Finally, the front rack is assembled onto the vehicle’s front roof, securing the front side side rails into the front fairing.
Final Assembly and Completion
Step ten involves installing the four Crossbars using Button Head Socket Cap Bolts Screws (M816) and Flat Washers (M8201). Step eleven details installing the complete roof rack – the Front Part connected to the Rear Part – using connecting brackets and Button Head Socket Cap Bolts Screws (M616), Flat Washers (M6161), and Flange Hex Lock Nuts (M6). Step twelve marks the completion of the installation.
Important Considerations and Notes
The documentation includes several important notes. Installation time is estimated at approximately two hours and may vary based on mechanical skill. It is crucial to verify that all parts are present and to read the instructions carefully before beginning installation. The documentation also states that the product parts included in the instruction manual may differ slightly from the actual product contents, but this generally should not affect the installation process. Users are advised to contact their distributor if they have any questions regarding their purchase.
Product Range – Hooke Road
Hooke Road offers a range of automotive accessories, including bumpers and racks for various vehicle models. The documentation lists the following products and prices as of May 6, 2021:
- Tacoma Offroad Steel Rear Bumper w/Swing Out Tire Carrier (05-15 Toyota Tacoma): $399.99
- Hooke Road Full Width Front Bumper w/Grill Guard (09-14 Ford F-150, Excluding Raptor): $599.99
- Hooke Road Full Width Front Bumper w/Grill Guard (09-14 Ford F-150, Excluding Raptor): $549.99
- 2011-2016 Ford F-250 F-350 Offroad Discovery Ⅰ Front Bumper Guard Protector: $459.99
- 2003-2005 Dodge Ram 2500 3500 DiscoveryⅠFront Bumper w/Winch Plate (Excluding Diesel Models): $459.99
- Ford Discovery Black Rear Bumper Replacement (06-14 F-150): $499.99
The documentation also references navigation menus for Wrangler JK, Wrangler JL, Wrangler TJ/LJ, Gladiator JT, and Jeep CJ models, indicating a broad product line focused on Jeep and truck accessories.
Conclusion
The Hooke Road BXG.8906-S roof rack installation requires careful assembly and mounting using specific hardware components. The provided documentation outlines a detailed, step-by-step process, emphasizing the importance of verifying parts and understanding the assembly sequence. The company offers a range of related products, primarily focused on off-road vehicle accessories. Users should consult the complete manual and ensure they have the necessary tools and skills before attempting installation.