Hooke Road offers a range of bumpers for various vehicle models, accompanied by specific installation procedures. This article details installation steps and compatibility information based on available documentation. The documentation indicates installation procedures may vary slightly depending on the specific bumper model and whether a wing version is purchased. The provided materials primarily focus on Jeep Wrangler, Jeep Gladiator, Toyota Tacoma, and Toyota Tundra models, as well as the Ford Bronco.
General Installation Notes
Installation of Hooke Road bumpers generally requires the removal of the factory-installed bumper as the initial step. The documentation suggests that approximately one hour and the assistance of two to three people may be needed for installation. Installation time can vary based on the installer’s mechanical skill level. Prior to beginning installation, it is crucial to verify that all necessary parts are present and to carefully read the provided instructions. The documentation notes that product parts in the instruction manual may differ slightly from the actual product contents, but this generally does not affect the installation process.
Model-Specific Compatibility
Hooke Road provides installation manuals categorized by vehicle model and SKU. The following compatibility information is derived from the provided documentation:
- Jeep Wrangler JK (2007-2018): SKU HE.1XXX series.
- Jeep Wrangler JL (2018-2024): SKU HE.2XXX series.
- Jeep Gladiator JT (2020-2024): SKU HE.7XXX series and BXG.7000-S, BXG.7001-1S, BXG.7002-S, BXG.7003-S, BXG.7009-S, BXG.7010-S, BXG.7011-1S, BXG.7012-S, BXG.7013-S, BXG.7014-S, BXG.7015-S, BXG.7016-S, BXG.7017-1, BXG.7018-1S, BXG.7019-S, BXG.7021, BXG.7022.
- Toyota Tacoma (2nd & 3rd Generation): SKU HE.4XXX series.
- Toyota Tundra (2007-2013 & 2014-2021): SKU HE.5XXX series.
- Ford Bronco (2021-2025): Compatible with door holder, hardtop storage, sliding cart, movable rack (BXG.2038A-1S).
The documentation indicates that the instruction manual for SKUs starting with BXG.1XXX is the same as HE.1XXX, and this pattern extends to other SKU series.
Installation Steps: General Procedure
The following steps represent a generalized installation procedure based on the provided documentation. Specific details may vary depending on the bumper model.
- Factory Bumper Removal: Remove the existing factory bumper from the vehicle.
- Component Assembly (if applicable): Assemble parts “A1”, “A2”, and “B” using Hex Bolts (M1230), Split Lock Washers (D12), Flat Washers (M1230*2), and Hex Nuts (M12).
- Bracket Installation: Install mounting brackets, adjusting their position to align with vehicle mounting points.
- Bumper Mounting: Hook the bumper into the vehicle, securing it with Button Head Socket Cap Bolts Screws (M620), Split Lock Washers (D6), and Flat Washers (M620*1).
- D-Ring Base Installation: Install the D-ring base into the car frame using Hex Bolts (M1240), Split Lock Washers (D12), Flat Washers (M122*30), and Flange Hex Lock Nuts (M12).
- D-Ring Installation: Install the D-rings.
- Wing Installation (if applicable): If a wing version was purchased, install the wings using Button Head Socket Cap Bolts Screws (M820 & M616), Split Lock Washers (D8 & D6), and Flat Washers (M8161 & M6161).
- Optional Wing Light Connection (if applicable): If the wing version includes lights, connect them for DRL (Daytime Running Light) and turn signal functionality.
Fastener Specifications
The documentation lists several fastener types used during installation. These include:
- Hex Bolts: M1230, M1240, M12*45
- Button Head Socket Cap Bolts Screws: M616, M620, M820, M825
- Split Lock Washers: D6, D8, D12
- Flat Washers: M6161, M6201, M8161, M8201, M12230, M12302
- Flange Hex Lock Nuts: M12
- Socket Head Cap Screws: M12*35
The documentation emphasizes the importance of adding gaskets during installation to ensure a stable installation effect.
Wing Version Installation Details
For bumpers purchased with a wing version, additional steps are required. These steps involve installing the wings using specific fasteners (M820 & M616 Button Head Socket Cap Bolts Screws, D8 & D6 Split Lock Washers, and M8161 & M6161 Flat Washers). The wing version may also include lights that can be connected for DRL and turn signal functionality.
Component List (BXG.2038A-1S)
The documentation for model BXG.2038A-1S provides a parts list for the regular version:
- Front Bumper Assembly (Qty: 1)
- Split Lock Washer (Qty: Not specified)
- Hex Bolts M12*45 (Qty: Not specified)
- Flat Washer M6201 (Qty: Not specified)
- Socket Head Cap Screws M12*35 (Qty: Not specified)
- Flat Washer M8201 (Qty: Not specified)
- Button Head Socket Cap Bolts Screws (Qty: Not specified)
The documentation also lists parts included with the wing version, but does not specify quantities. These include Wings and various fasteners (M820, M616 Button Head Socket Cap Bolts Screws, M816, M616 Flat Washers, and Flange Hex Lock Screws).
Important Considerations
The documentation includes a cautionary note stating that the product parts in the instruction manual may differ slightly from the actual product contents. However, these differences are generally not expected to affect the installation process. It is recommended to carefully inspect all components before beginning installation to ensure compatibility and completeness.
Conclusion
Hooke Road bumpers are designed for a range of vehicles, including Jeep, Toyota, and Ford models. Installation involves removing the factory bumper and securing the new bumper using specified fasteners. The installation process may vary slightly depending on the specific model and whether a wing version is purchased. Careful attention to the provided instructions and verification of all parts are crucial for a successful installation. The documentation emphasizes the importance of using gaskets for a stable installation and highlights the optional functionality of wing-mounted lights.