The Falcon SC71 door closer is an electro-mechanical swing operator designed for use with 8230 and 8240 series applications. Installation involves attaching an arm and shoe assembly to the frame, securing a cover with screws, and mounting the closer to the door with the spring tube facing away from the hinge. The documentation details specific measurements for installation, including 42" (1050 mm) and 48" (1220 mm) options, and references a fifth hole spacer for the SC71 DEL model. This article provides a detailed overview of the installation process and specifications based on the available documentation.
Component Identification and Preparation
The Falcon SC71 utilizes several components during installation. The documentation references a 1/4-20 drill and tap, indicating the need for precise hole preparation. Improper installation or regulation is cautioned against, as it may result in personal injury or property damage. Users are directed to contact Falcon for questions regarding installation. Components include an attachment, attachment lock washer, and cover plug. The documentation also mentions forged arm models, specifically the SC71 (1-6 Adj.).
Installation Procedure
The installation process begins with attaching the arm and shoe assembly to the frame. Following this, the cover is secured with screws. A fifth hole spacer is specified for the SC71 DEL model. The closer is then installed onto the door, with specific attention given to the orientation of the spring tube, which must face away from the hinge. For right-hand edge doors, the valves should be positioned upwards. The documentation provides instructions in multiple languages, including Spanish and French, suggesting a broad intended market.
Dimensional Specifications
The documentation highlights two primary dimensional specifications for installation: 42" (1050 mm) and 48" (1220 mm). These measurements likely refer to the door width or the distance between mounting points. The documentation also specifies 48" (1220 mm) as an alternative measurement. These dimensions are crucial for ensuring proper functionality and alignment of the door closer. The documentation includes tolerances of ± .13, indicating a level of precision required during installation.
Documentation Details and Revision History
The provided documentation is identified as an instruction sheet for the SC71 Series Forged Arm. It was created by D. Myers and M. Sasso on February 17, 2014, and has a revision number of 43722. The document is intended to be printed on both sides and in black ink. The creation date is listed as January 3, 2012. The documentation notes that printing in different countries may vary.
Language Support
The installation instructions are provided in three languages: English, Spanish, and French. This suggests the Falcon SC71 door closer is intended for distribution and installation in multiple international markets. The multilingual support aims to facilitate ease of installation for a wider range of users.
Safety Considerations
The documentation emphasizes the importance of proper installation and regulation to prevent personal injury or property damage. It explicitly warns against improper installation and directs users to contact Falcon with any questions. This highlights the manufacturer’s commitment to safety and the need for qualified personnel to perform the installation.
Model Variations
The documentation references the SC71 DEL model, specifically noting the use of a fifth hole spacer during installation. This suggests the existence of variations within the SC71 series, each potentially requiring specific installation procedures or components. The documentation also mentions models with forged arms (SC71 1-6 Adj.).
Application and Mounting
The documentation briefly describes the application of the closer as being mounted to the side of the door. It references "ferrures d'application" (application hardware) and "sujetadores" (fasteners) in the Spanish translation, indicating the need for appropriate mounting hardware. The documentation also mentions perforating and tapping holes for secure attachment.
Document Metadata
The document includes metadata regarding its creation and revision history. The release date is February 17, 2014. The document is identified as a white paper. The title is "SC71 Series Forged Arm Instruction Sheet." The document also includes a note indicating that the country of printing may vary.
Conclusion
The Falcon SC71 door closer is an electro-mechanical swing operator requiring careful installation to ensure proper functionality and safety. The installation process involves attaching components to the frame and door, paying close attention to dimensional specifications and the orientation of the spring tube. The documentation provides instructions in multiple languages and emphasizes the importance of proper installation to prevent injury or damage. Variations within the SC71 series, such as the SC71 DEL model, may require specific components or procedures.