The Electrolux washer pedestal is designed to elevate Electrolux washing machines, offering ergonomic benefits and potential storage solutions. Installation involves securing the pedestal to the washer’s frame using provided hardware and ensuring the combined unit is level. This article details the installation process, required tools, safety precautions, and warranty information based on available documentation. The pedestal is specifically designed for use with Electrolux washers and may increase the overall height of the unit by 12-15 inches.
Materials and Tools Required
Successful installation of an Electrolux washer pedestal requires specific materials and tools. The necessary components include the Electrolux washer pedestal itself, along with the included hardware kit containing screws. Specifically, the kit contains 14 #10 (16 x .500) screws. Tools required for installation are an adjustable wrench, a carpenter’s level, a Phillips screwdriver, and potentially a 9/16" or 14 mm box wrench. A utility knife may also be needed for finishing touches.
Safety Precautions
Prior to commencing installation, several safety precautions must be observed. The washer must be disconnected from the power source. The water supply lines to the washer should also be turned off. It is recommended to wear gloves and safety glasses to protect against injury. When moving the appliance, particularly when tipping it onto its side, it is crucial to avoid using the open dispenser drawer or cavity as a handhold, as this could cause serious damage. It is also advised to have more than one person assist with moving or lifting the appliance to prevent back injury.
Installation Procedure
The installation process involves several steps. First, the pedestal should be unpacked and inspected for any damage, ensuring all parts are present. The pedestal is then positioned in front of the washer, aligned with the front legs. Next, the pedestal is attached to the washer using the provided screws, which should be tightened firmly.
If the washer is already installed, it must be disconnected from the electrical connection, hot and cold water supplies, and the drain hose before proceeding. The appliance should then be carefully laid on its left side, ensuring each leg is fully screwed into the base.
After attaching the pedestal, it is essential to level the washer and pedestal using a level. Adjust the leveling feet on the pedestal as needed to achieve a level surface. Once leveled, the water supply and drain hose can be reconnected, ensuring secure attachments and checking for leaks. Finally, the washer can be reconnected to the power source.
Pedestal Components and Dimensions
The Electrolux 15” pedestal kit includes two front brackets (A) and two rear brackets (B), in addition to the screw kit (C). While specific dimensions of the pedestal itself are not detailed beyond the height increase of 12-15 inches, dimensional diagrams provided show a width of 26.5 inches (67 cm) and a depth of 42.5 inches (108 cm) for the combined washer and pedestal unit. The pedestal itself has a width of 15 inches (38 cm) and a depth of 27 inches (68.5 cm).
Post-Installation Checks and Finishing Touches
Following installation, several checks should be performed. A test cycle should be run to check for leaks in the water supply and drain hose connections. The pedestal height should be adjusted to the desired level. Any excess material around the pedestal can be trimmed using a utility knife. It is noted that due to the increased center of gravity, some side-to-side rocking during operation is normal, but can be minimized by ensuring proper installation and leveling.
Frequently Asked Questions
Documentation provides answers to several frequently asked questions. The Electrolux washer pedestal is designed specifically for use with Electrolux washers. Some models offer storage drawers for added convenience. The pedestal’s exterior can be cleaned with a damp cloth and mild detergent, avoiding harsh chemicals or abrasive cleaners. If the washer is not level on the pedestal, the leveling feet should be adjusted.
Warranty Information
The Electrolux washer pedestal is covered by a two-year limited warranty. This warranty covers defects in materials or workmanship when the appliance is installed, used, and maintained according to the provided instructions. The warranty does not cover service calls for non-malfunction issues, appliances used outside of a normal household setting, or labor/in-home service costs. Damages incurred during transportation or installation are also excluded.
Conclusion
Installing an Electrolux washer pedestal can provide ergonomic benefits and potentially additional storage. The process requires careful attention to safety precautions, proper leveling, and secure connections of water and drain lines. The pedestal is specifically designed for use with Electrolux washers and is covered by a two-year limited warranty. Following the provided instructions ensures a successful installation and optimal performance.