The Hair Washer GWT460AW is designed for both personal and professional use, offering a compact and efficient washing unit. Proper installation is crucial for optimal performance and longevity. This article details the dimensions, installation requirements, step-by-step installation process, and maintenance guidelines for the GWT460AW, based on available documentation. The unit requires specific plumbing and electrical connections, and attention to detail during setup will ensure efficient operation.
Dimensions and Capacity
The GWT460AW is designed with compactness in mind, suitable for various spaces. Exterior dimensions are as follows: width – 27 inches, depth – 30 inches, and height – 38 inches. Multiple sources confirm slightly differing measurements; however, these represent the most frequently cited values. The unit features a 4.5 cubic foot drum, providing a generous interior capacity for medium to large laundry loads. When planning installation, an additional inch of space on either side is recommended for airflow, six inches behind the unit for hose and power cord clearance, and at least one inch above the unit to prevent confinement.
Installation Requirements
Successful installation of the GWT460AW depends on meeting specific requirements related to space, plumbing, and electrical connections.
Space Dimensions
A minimum space of 36 inches in height, 24 inches in width, and 30 inches in depth is required for comfortable usage and maintenance access, according to one source. However, the exterior dimensions of the unit itself (27” width, 30” depth, 38” height) suggest that the installation space should accommodate these measurements, plus the recommended clearances.
Plumbing Requirements
The GWT460AW requires both hot and cold water supplies, with a recommended water pressure between 20 and 80 PSI. Standard ½-inch water supply lines are suitable for this model. A 1.5-inch drain line is also necessary, ideally connected to a floor drain or nearby sink. The unit includes two water inlet hoses (hot and cold) and requires a dual water supply valve within 3-4 feet of the washer’s rear. Hoses should be tightened securely to prevent leaks and inspected annually for wear or damage.
Electrical Considerations
The GWT460AW operates on a standard 120V outlet, which should be grounded and capable of handling the unit’s power rating. The use of extension cords is discouraged due to potential electrical hazards; if the outlet is not conveniently located, consulting an electrician for a permanent solution is recommended.
Step-by-Step Installation Process
The installation process can be streamlined by following a systematic approach.
Step 1: Gather Tools and Materials
Prior to beginning installation, the following tools should be assembled: an adjustable wrench, flathead and Phillips screwdrivers, a level, a tape measure, plumber's tape, electrical tape, and pliers.
Step 2: Prepare the Installation Area
Ensure the installation area meets the required space dimensions and is free of obstructions. The flooring should be level; adjustments can be made using a level if necessary.
Step 3: Connect Plumbing
Connect the hot and cold water inlet hoses to the corresponding valves, ensuring a secure fit. Connect the drain hose to a standpipe or laundry sink, maintaining a height between 24 and 96 inches for optimal water flow.
Step 4: Level the Washer
Utilize the adjustable leveling feet located under the GWT460AW to ensure the unit is perfectly balanced. A carpenter’s level can be used to confirm proper alignment. Uneven washers can vibrate excessively during operation.
Step 5: Electrical Connection
Plug the GWT460AW into a grounded 120V outlet. Avoid using extension cords.
Step 6: Testing
After installation, run a test cycle without clothes to confirm proper functionality. Check for leaks and abnormal vibrations.
Maintenance Guidelines
Regular maintenance is crucial for extending the lifespan and ensuring optimal performance of the GWT460AW.
Cleaning
The unit should be cleaned regularly with a non-abrasive cleaner to prevent the buildup of hair and product residue. A deep clean is advisable every three months.
Plumbing Inspection
Plumbing connections should be inspected for leaks or blockages.
Hose Replacement
Water inlet hoses should be inspected annually and replaced if signs of wear or damage are present.
Additional Tips
Several additional tips can contribute to a seamless installation and long-term performance. Ensure the installation area is well-ventilated to prevent moisture buildup. Check for any local plumbing codes or regulations that may affect the installation process. If uncertain about any aspect of the installation, consulting a professional installer is recommended. Before final placement, test the unit to confirm everything is functioning correctly. Always refer to the instruction manual for detailed setup information and ongoing maintenance tips. If unsure about electrical or plumbing connections, consult a licensed technician.
Conclusion
The Hair Washer GWT460AW offers a compact and efficient solution for hair washing needs. Successful installation requires careful attention to space, plumbing, and electrical requirements. Following the step-by-step installation process and adhering to the recommended maintenance guidelines will ensure optimal performance and longevity of the unit. Proper planning and execution are key to maximizing the benefits of this appliance.