Introduction
Ford’s range of commercial and heavy-duty vehicles requires specialized air conditioning (AC) kits to maintain optimal performance under demanding conditions. These kits are engineered to integrate with the vehicle’s existing systems while accounting for variations in engine configurations, alternator setups, and compressor types. The source data provided outlines specific AC kit models, their compatibility with various Ford models, and important technical notes such as build dates and installation requirements. This article compels an in-depth analysis of the key models, their specifications, and the importance of verifying compatibility before installation.
Understanding the nuances of these AC kits ensures that users and technicians can select the correct components for their vehicles. The following sections will explore the compatibility of AC kits with different Ford models, highlight technical considerations, and provide guidance on contacting manufacturers for support.
AC Kit Models and Vehicle Compatibility
AC kits are categorized based on the type of Ford vehicle and engine they support. The provided data includes information for both pickup trucks and vans, with specific models for different years, engine types, and configurations.
Ford Trucks – 6.7L Diesel Engines
For Ford Super Duty trucks with 6.7L diesel engines, several AC kit models are available depending on the year range, alternator configuration, and build dates.
FMK264SD508-8 is compatible with 2017–2023 F250–550 and F600 models. It supports a single alternator and a TM15 compressor or smaller. It is important to note that for 2023 models, this kit is only suitable for vehicles with a build date of 12.31.22 or earlier.
FMK265SD508-8 is designed for 2017–2023 F250–550 and 2020–2023 F600 models. It is not compatible with vehicles equipped with Adaptive Steering and is also limited to 2023 models with a build date of 12.31.22 or earlier.
FMK266SD508-6 is intended for 2023–2025 F250–550 and F600 models. It supports a single alternator and TM15 or smaller compressors. It is important to note that this model is not compatible with the Ford ProPower Option.
FMK267SD508-I6 is suitable for 2023–2025 F250–550 and F600 models with dual alternators. This model is also not compatible with the Ford ProPower Option or Adaptive Steering. A technical note in the documentation warns that trucks with a build date of May 2nd, 2024 or later may have a single-side, grooved accessory drive belt installed. In such cases, appropriate idler pulleys should be used during installation.
Ford Trucks – 7.3L and 6.8L Gas Engines
For gas-powered Ford Super Duty trucks, the available AC kits vary depending on the engine displacement and alternator setup.
FMK241SD508-I6 supports 2020–2026 7.3L V8 gas F250–550 and F600 Super Duty models. It is also compatible with 2023–2026 6.8L V8 gas models and is designed for single alternator configurations.
FMK241TM21-I6 is similar to the above model but is specifically designed for use with a TM21 Direct Mount Compressor.
FMK241SD508-I6DA supports 2020–2022 F250–550 and F600 models with 7.3L V8 gas engines and dual alternator configurations.
FMK242SD508-I6DA is compatible with 2023–2026 F250–550 and F600 models with 7.3L or 6.8L V8 gas engines and dual alternator setups.
Ford Vans – Diesel and Gas Models
The AC kit models for Ford vans are also divided based on engine type and vehicle model.
FMK242SD508-I6DAMD supports 2023–2025 7.3L Ford Gas F650–750 models with a dual alternator setup.
VFK241SD508-I6 is suitable for 2021–2025 Ford E350–450 Cutaway models with 7.3L V8 gas engines.
VFK25SD508-I6 and VFK26SD508-I4 are for 2014–2018 and 2019–2022 Transit Connect models, respectively. These kits are intended for use with TM13 or TM15 compressors and are not recommended for TM16 compressors or 404A refrigerant.
VFK27SD508-I4 supports 2019–2023 Transit Connect models with 2.0L gas engines. It requires a 6- or 8-groove clutch and is also intended for TM13 or TM15 compressors.
VFK36SD508-I7 is compatible with 2015–2019 Transit 3.2L diesel models.
Ford Pickup Trucks with Single and Dual Alternator Configurations
Pickup trucks with single or dual alternator configurations also have specific AC kits. For example:
FMK46SD508-8 is suitable for a variety of pickup trucks.
FMK47SD508-I6 and FMK47SD508-8 are for single and dual alternator configurations, respectively.
FMK240SD508-8 is another model designed for specific pickup configurations.
Technical Considerations for Installation
Installation of these AC kits requires careful attention to technical specifications and vehicle-specific requirements. The following considerations are important to ensure compatibility and proper function:
Build Dates and Model Years
Some AC kits are only compatible with specific build dates. For example, FMK264SD508-8 is only suitable for 2023 models with a build date of 12.31.22 or earlier. Similarly, FMK266SD508-6 is designed for 2023 models with a build date of 1.1.23 or later. These build date restrictions are critical for ensuring the AC kit aligns with the vehicle’s design and configuration.
Alternator Configurations
AC kits must be selected based on the vehicle’s alternator setup. Single and dual alternator configurations are both addressed in the provided documentation. For example, FMK266SD508-6 is for single alternator models, while FMK267SD508-I6 is for dual alternator configurations. Failure to match the AC kit to the correct alternator setup may result in improper installation or performance issues.
Compressor Compatibility
Compressor type and size are also important factors. Some kits are compatible with TM13, TM15, or TM21 compressors, while others are not recommended for TM16 compressors or 404A refrigerant. It is important to verify the compressor type in the vehicle before selecting an AC kit to avoid incompatibility issues.
Additional Technical Notes
The documentation also includes several technical notes that should be considered during installation. For example, the FMK267SD508-I6 model warns that trucks with a build date of May 2nd, 2024 or later may have a single-side, grooved accessory drive belt installed. In such cases, appropriate idler pulleys should be used to ensure proper function.
Contacting the Manufacturer for Support
Given the complexity of these AC kits and the importance of correct installation, it is recommended that users or technicians contact the manufacturer for support when needed. The documentation provides contact information for CW Mill Equipment Co., Inc., including a phone number, fax, and email address. Users are encouraged to reach out for assistance with AC kit selection, installation guidance, or application-specific queries.
The manufacturer also notes that specifications are subject to change without notice and that product designs may vary. As such, it is important to confirm the latest information and specifications before proceeding with installation.
Conclusion
AC kits for Ford trucks and vans are designed to meet the unique requirements of commercial and heavy-duty vehicles. The provided documentation outlines a range of models compatible with different Ford models, engine configurations, and build dates. Understanding the technical specifications and installation requirements is essential for ensuring proper function and avoiding compatibility issues. Users are advised to consult the manufacturer for support and to verify the latest information before installation. By following the guidelines and recommendations provided, technicians and users can ensure a successful installation and optimal performance of the AC systems in Ford vehicles.