Introduction
The H99ICAT is a 4-inch recessed ceiling lighting housing designed for new construction and insulation contact (IC-rated) environments. It is engineered for use in insulated ceilings where direct contact with insulation is required, ensuring compliance with building codes and airflow restrictions. This device is part of the Halo product line and is marketed for accent, task, and general lighting applications. Its features include an AIR-TITE™ design, die-formed construction, and ease of installation through tool-less adjustments and pre-included wiring components.
This article provides a detailed overview of the H99ICAT, including its key specifications, technical features, installation considerations, and return policies, based solely on the manufacturer and vendor documentation provided.
Technical Specifications and Features
Physical and Electrical Specifications
The H99ICAT is a 4-inch aperture housing designed for recessed mounting in new construction. Key physical dimensions include:
- Ceiling opening size: 4-3/8 inches
- Overall dimensions: 8-1/2 inches in length, 5-1/4 inches in width, and 5-1/2 inches in height
- Voltage rating: 120 volts
- Amperage rating: 0.417 amps at 120 volts
- Product weight: 2.4 pounds
- Insulation contact (IC) rated: Yes
- Voltage type: Line voltage (120V)
These specifications position the H99ICAT as suitable for both residential and commercial new construction projects where insulation compatibility is critical.
Design and Installation Advantages
The H99ICAT includes several design features that simplify installation and ensure compliance with insulation contact requirements:
- AIR-TITE™ Design: This feature ensures restricted airflow between conditioned and unconditioned spaces, meeting insulation standards and improving energy efficiency.
- Got Nail!™ Bar Hangers: These allow for secure fastening without the need for additional tools or hardware.
- Pass-N-Thru™ Tool-Less Shortening of Bar Hangers: Enables quick adjustments without removing the hanger, streamlining the installation process.
- Slide-N-Side™ Wire Traps: Allow non-metallic sheathed cable to be installed without the use of tools or removal of knockouts, reducing installation time and complexity.
- Quick Connect Wiring Connectors: Included in the junction box, these connectors allow for efficient and safe electrical connections without the need for additional tools.
- Thermal Protection: The housing is thermally protected against over-lamping, ensuring safety and preventing overheating.
These features make the H99ICAT an attractive option for electricians and DIY installers seeking a reliable, code-compliant, and user-friendly recessed lighting solution.
Compatibility and Performance
The H99ICAT is designed to accept a wide variety of trims, making it suitable for a range of lighting applications:
- Accent and Task Lighting: Ideal for use over countertops, in display areas, and in spaces requiring focused illumination.
- General Lighting: With the appropriate trim, the housing can be used for broad beam distribution and ambient lighting.
- Insulation Compatibility: The IC rating allows the housing to be in direct contact with insulation without compromising safety or airflow standards.
The product is also compatible with a 120V line voltage system and includes wiring connectors to facilitate electrical connections. These attributes ensure the H99ICAT is adaptable to various lighting layouts and building requirements.
Installation Considerations
Preparation and Planning
Before installing the H99ICAT, it is essential to review the following considerations:
- Ceiling Type: The housing is specifically designed for insulated ceilings and must be installed in a manner that maintains the AIR-TITE™ seal to prevent airflow between conditioned and unconditioned spaces.
- Construction Type: The H99ICAT is intended for new construction only. It is not suitable for retrofit or existing construction applications.
- Electrical Requirements: The housing operates on a 120V line voltage system and must be connected to a properly wired electrical circuit. The included wiring connectors simplify this process but must be installed correctly to ensure safety and functionality.
Step-by-Step Installation Process
While detailed installation instructions are not explicitly provided in the source materials, the following general steps can be inferred from the product features and technical descriptions:
Mounting the Housing:
- Use the Got Nail!™ bar hangers to secure the housing to the ceiling joist.
- Adjust the hangers using the Pass-N-Thru™ feature to ensure the housing is level and properly aligned.
Wiring the Housing:
- Access the junction box by removing the housing from the plaster frame if necessary.
- Use the included Quick Connect wiring connectors to make electrical connections. Ensure all connections are secure and meet local electrical code requirements.
Sealing and Insulation:
- The AIR-TITE™ design ensures that the housing maintains a seal between conditioned and unconditioned spaces. Verify that no gaps or airflow paths exist around the housing.
- If required, apply additional sealing materials to reinforce the AIR-TITE™ effect and ensure compliance with insulation standards.
Trim Installation:
- Once the housing is securely mounted and wired, install the appropriate trim to achieve the desired lighting effect. The H99ICAT is compatible with a wide range of trims, including those for accent, task, and general lighting.
Final Inspection:
- Before energizing the circuit, inspect all connections and ensure the housing is properly installed and sealed.
- Test the lighting system to confirm that it operates correctly and that there are no issues with wiring or insulation contact.
These steps provide a general overview of the installation process for the H99ICAT. For specific details or additional guidance, it is recommended to consult the manufacturer’s official documentation or a licensed electrician.
Return and Warranty Policies
The return and warranty policies for the H99ICAT are outlined in the vendor documentation, particularly from Source [1]:
- Return Window: Items must be returned within 30 days of receiving the product.
- Eligibility: To be eligible for a return, the product must be new, unused, uninstalled, and in the original packaging with all tags, accessories, manuals, and parts. It must also be in resaleable condition, with no markings, labels, writing, or damage to the product or packaging.
- Proof of Purchase: A receipt or proof of purchase is required to process a return.
- Non-Returnable Items: Installed or energized electrical products are not returnable. This includes items that have been wired, powered, mounted, cut, crimped, soldered, or modified.
For returns, customers must email the vendor with their order number, item(s), and reason for return. An RMA (Return Merchandise Authorization) is required before any return can be processed. Packages without an RMA may be refused. Unless the return is due to an error on the vendor’s part (e.g., wrong item, defective item, or shipping damage), return shipping is the customer’s responsibility.
These policies ensure that customers receive their products in a condition suitable for return, while also protecting the vendor from the risks associated with handling used or modified electrical components.
Conclusion
The Halo H99ICAT is a versatile and code-compliant recessed lighting housing designed for new construction and insulation contact environments. Its technical features, including the AIR-TITE™ design, Got Nail!™ bar hangers, and Quick Connect wiring connectors, make it an efficient and user-friendly option for both professional electricians and DIY enthusiasts.
The product is well-suited for a wide range of applications, from accent and task lighting to general illumination, and its compatibility with various trims allows for flexibility in lighting design. Installation considerations emphasize the importance of proper planning, insulation compliance, and adherence to electrical codes.
Return policies are clearly defined, ensuring that customers can return items within a 30-day window under specific conditions. These policies highlight the importance of keeping products in new, unused, and uninstalled condition for eligibility.
Overall, the H99ICAT represents a reliable and innovative solution for modern lighting needs, particularly in insulated ceiling environments. Its design and features align with industry standards and user expectations for performance, safety, and ease of use.